Rachid Dris

Microplastic contamination in an urban area: a case study in Greater Paris

This study investigates the microplastic contamination of both urban compartments (wastewater and total atmospheric fallout) and surface water in a continental environment (Greater Paris, France). These first investigations on urban environment confirm the presence of microplastics in sewage, freshwater and total atmospheric fallout and provide knowledge on the type and size distribution of microplastics in the [100 µm-5 000 µm] range. For the first time, the presence of microplastics, mostly fibers, is highlighted in total atmospheric fallout (29-280 particles/m2/day). High levels of fibers were found in wastewater (260-320 x103 particles/m3). In treated effluent, the contamination significantly decreases to 14-50 x103 particles/m3. In River Seine, two sampling devices are used to collect both large and small microplastic particles: i) a plankton net (80 µm mesh) and ii) a manta trawl (330 µm mesh). Sampling with the plankton net showed a predominance of fibers with concentrations ranging from 3 to 108 particles/m3. A greater diversity of both microplastic shapes and types was encountered during manta trawl sampling but at much lower concentrations (0.28-0.47 particles/m3). This combined approach could be relevant and implemented in future studies to provide an accurate overview of microplastic distribution in freshwater.

Synthetic fibers in atmospheric fallout: A source of microplastics in the environment?

Sources, pathways and reservoirs of microplastics, plastic particles smaller than 5mm, remain poorly documented in an urban context. While some studies pointed out wastewater treatment plants as a potential pathway of microplastics, none have focused on the atmospheric compartment. In this work, the atmospheric fallout of microplastics was investigated in two different urban and sub-urban sites. Microplastics were collected continuously with a stainless steel funnel. Samples were then filtered and observed with a stereomicroscope. Fibers accounted for almost all the microplastics collected. An atmospheric fallout between 2 and 355 particles/m(2)/day was highlighted. Registered fluxes were systematically higher at the urban than at the sub-urban site. Chemical characterization allowed to estimate at 29% the proportion of these fibers being all synthetic (made with petrochemicals), or a mixture of natural and synthetic material. Extrapolation using weight and volume estimates of the collected fibers, allowed a rough estimation showing that between 3 and 10 tons of fibers are deposited by atmospheric fallout at the scale of the Parisian agglomeration every year (2500 km(2)). These results could serve the scientific community working on the different sources of microplastic in both continental and marine environments.

Beyond the ocean: contamination of freshwater ecosystems with (micro-)plastic particles

Massive accumulation of plastic particles has been reported for marine ecosystems around the world, posing a risk to the biota. Freshwater ecosystems have received less attention despite the majority of plastic litter being produced onshore and introduced into marine environments by rivers. Some studies report not only the presence of microplastics in freshwater ecosystems, but show that contamination is as severe as in the oceans. In continental waters microplastics have been observed in both sediments (predominantly lakeshores but also riverbanks) and water samples (predominantly surface water of lakes and rivers). This review highlights recent findings and discusses open questions, focusing on the methodology of assessing this contaminant in freshwater ecosystems. In this context, method harmonization is needed in order to obtain comparable data from different environmental compartments and sites. This includes sampling strategies (at spatial and temporal 18 scales), sample treatment (taking into consideration high levels of organic matter and suspended 19 solids) and reliable analytical methods to identify microplastics.

A first overview of textile fibers, including microplastics, in indoor and outdoor environments.

Studies about microplastics in various environments highlighted the ubiquity of anthropogenic fibers. As a follow-up of a recent study that emphasized the presence of man-made fibers in atmospheric fallout, this study is the first one to investigate fibers in indoor and outdoor air. Three different indoor sites were considered: two private apartments and one office. In parallel, the outdoor air was sampled in one site. The deposition rate of the fibers and their concentration in settled dust collected from vacuum cleaner bags were also estimated. Overall, indoor concentrations ranged between 1.0 and 60.0 fibers/m3. Outdoor concentrations are significantly lower as they range between 0.3 and 1.5 fibers/m3. The deposition rate of the fibers in indoor environments is between 1586 and 11,130 fibers/day/m2 leading to an accumulation of fibers in settled dust (190-670 fibers/mg). Regarding fiber type, 67% of the analyzed fibers in indoor environments are made of natural material, primarily cellulosic, while the remaining 33% fibers contain petrochemicals with polypropylene being predominant. Such fibers are observed in marine and continental studies dealing with microplastics. The observed fibers are supposedly too large to be inhaled but the exposure may occur through dust ingestion, particularly for young children.

Synthetic and non-synthetic anthropogenic fibers in a river under the impact of Paris Megacity: Sampling methodological aspects and flux estimations

Processed fibers are highly present in our daily life and can be either natural, artificial (regenerated cellulose) and synthetic (made with petrochemicals). Their widespread use lead inevitably to a high contamination of environment. Previous studies focus on plastic particles regardless of their type or shape as long as they are comprised between 330μm and 5mm. On the contrary, this study focuses exclusively on fibers using a smaller mesh size net (80μm) to sample freshwater. Moreover, all processed organic fibers are considered, irrespective to their nature. First, the short term temporal variability of the fibers in the environment was assessed. While exposing the sampling net during 1min a coefficient of variation of approx. 45% (with n=6) was determined. It was of only 26% (n=6) when the exposure was of 3min. The assessment of the distribution through the section showed a possible difference in concentrations between the middle of the water surface and the river banks which could be attributed to the intense river traffic within the Paris Megacity. The vertical variability seems negligible as turbulence and current conditions homogenize the distribution of the fibers. A monthly monitoring showed concentrations of 100.6±99.9fibers·m-3 in the Marne River and of: 48.5±98.5, 27.9±26.3, 27.9±40.3 and 22.1±25.3fibers·m-3 from the upstream to downstream points in the Seine River. Once these concentrations are converted into fluxes, it seems that the impact generated by the Paris Megacity cannot be distinguished. Investigations on the role of sedimentation and deposition on the banks are required. This study helped fill some major knowledge gaps regarding the fibers in rivers, their sampling, occurrence, spatial-temporal distribution and fluxes. It is encouraged that future studies include both synthetic and none synthetic fibers.

Macroplastic and microplastic contamination assessment of a tropical river (Saigon River, Vietnam) transversed by a developing megacity

Both macroplastic and microplastic contamination levels were assessed for the first time in a tropical river estuary system, i.e. the Saigon River, that traverses a developing South East Asian megacity, i.e. Ho Chi Minh City, Vietnam. The analysis of floating debris collected daily on the Nhieu Loc - Thi Nghe canal by the municipal waste management service shows that the plastic mass percentage represents 11-43%, and the land-based plastic debris entering the river was estimated from 0.96 to 19.91 g inhabitant-1 d-1, namely 350 to 7270 g inhabitant-1 yr-1. Microplastics were assessed in the Saigon River and in four urban canals by sampling bulk water for anthropogenic fiber analysis and 300 μm mesh size plankton net exposition for fragment analysis. Fibers and fragments are highly concentrated in this system, respectively 172,000 to 519,000 items m-3 and 10 to 223 items m-3. They were found in various colors and shapes with smallest size and surface classes being predominant. The macroplastics and fragments were mainly made of polyethylene and polypropylene while the anthropogenic fibers were mainly made of polyester. The relation between macroplastic and microplastic concentrations, waste management, population density and water treatment are further discussed.