Radin Maya Saphira Radin Mohamed

A monitoring of environmental effects from household greywater reuse for garden irrigation.

The option of reusing greywater is proving to be increasingly attractive to address the water shortage issue in many arid and semiarid countries. Greywater represents a constant resource, since an approximately constant amount of greywater is generated from kitchen, laundries, bathroom in every household daily, independent of the weather. However, the use of greywater for irrigation in particular for household gardening may pose major hazards that have not been studied thoroughly. In this study, a 1-year monitoring was conducted in four selected households in Perth, Western Australia. The aim of the monitoring works is to investigate the variability in the greywater flow and quality, and to understand its impact in the surrounding environments. Case studies were selected based on different family structure including number, ages of the occupants, and greywater system they used. Samples of greywater effluent (showers, laundries, bathtub, and sinks), leachate, soil, and plants at each case study were collected between October 2008 and December 2009 which covered the high (spring/summer) and low (autumn/winter) production of greywater. Physical and chemical tests were based on the literature and expected components of laundry and bathroom greywater particularly on greywater components likely to have detrimental impacts on soils, plants, and other water bodies. Monitoring results showed the greywater quality values for BOD, TSS, and pH which sometimes fell outside the range as stipulated in the guidelines. The soil analyses results showed that salinity, SAR, and the organic content of the soil increased as a function of time and affected the plant growth. Nutrient leaching or losses from soil irrigated with greywater shows the movement of nutrients and the sole impact from greywater in uncontrolled plots in case studies is difficult to predicted due to the influence of land dynamics and activities. Investigative and research monitoring was used to understand greywater irrigation in households. Greywater quality is very site specific and difficult to predetermine or control except for the use of some recommended household products when using greywater. Investigative and research monitoring was indicated that greywater quality is very site specific and difficult to predetermine or control except for the use of some recommended household products when using greywater.

The dual roles of phycoremediation of wet market wastewater for nutrients and heavy metals removal and microalgae biomass production

Wastewater generated from fresh, vegetables and meat shops contains high concentrations of nutrients, COD, BOD and TSS. Therefore, the direct discharge of wet market wastewater into natural water may increase the pollution level. Wet market wastewater is rich with nutrients necessary for microalgae growth. Therefore, it represent a superlative environment for producing high quantity of microalgae biomass which have several applications in aquaculture, human nutrition and pharmaceutical industries. Phycoremediation is a process with high potential for the treatment wastewater and removal of nutrients and heavy metals as well as the production of microalgae biomass. However, the main challenges for the phycoremediation technology lie in the wastewater composition, microalgae species, and the competition process between the microalgae strain and the indigenous organisms as well as final utilization of biomass yield. The present review discusses the dual roles of phycoremediation for nutrients and heavy metals removal and microalgae biomass production. The microbiological aspects of phycoremediation, mechanism for heavy metals removal from wastewater, as well as factors affecting wastewater treatment are reviewed. It appears that phycoremediation plays an important role in the treatment of wastewater and production of microalgae biomass.

Reduction of microbial risk associated with greywater by disinfection processes for irrigation

Greywater is one of the most important alternative sources for irrigation in arid and semi-arid countries. However, the health risk associated with the microbial contents of these waters limits their utilization. Many techniques have been developed and used to generate a high microbiological quality of greywater. The main problem in the treatment of greywater lies in the nature of pathogenic bacteria in terms of their ability to survive during/after the treatment process. The present review focused on the health risk associated with the presence of pathogenic bacteria in greywater and the treatment technologies used for the disinfection processes.

Removal of Nutrients and Selected Heavy Metals in Wet Market Wastewater by Using Microalgae Scenedesmus sp.

The wet market wastewater may lead to pollution, odour and aesthetic problems to the environment and society if not treating properly. Thus, this research was conducted to culture microalgae Scenedesmus sp. and to identify the optimal concentration of microalgae Scenedesmus sp.due to the nutrient and heavy metal removals from wet market wastewater based on laboratory scale. The samples were taken from Public Market Parit Raja, Batu Pahat at 9a.m. in the morning using grab sampling technique. The characteristics of raw wastewater and microalgae Scenedesmus sp. were determined. There are five sample wastewater (used 625ml for each five sample wastewater) with five different sample concentrations of microalgae which are 6.50x105, 49.88x104, 34.75x104, 19.63x104 and 49.88x104 cell/ml with 16 days as duration for period study. The microalgae were cultured by BBM for eight days and another eight days for treatment with replicates three times for each sample. The analysis were measured due to the nutrient and heavy metal removals which are TN, TP, TOC, Fe and Zn during eight days treatment process. Based on experimental result, the optimum efficiency removals for each concentration were achieved 45.6-86.4% of nutrients and heavy metals removal. The highest amount of nutrient and heavy metal removals after wastewater treatment by microalgae are TN 74.77%, TP 82.17%, TOC 86.36%, Fe 65.76% and Zn 84.14%. As conclusion for this experiment, Sample 2 (concentration 49.88x104 cell/ml of microalgae Scenedesmus sp.) is the optimum concentration due to the highest percentage of nutrients and heavy metals removal which achieved 65.3-82.1% which TN 65.32%, TP 76.77%, TOC 80.34%, Fe 65.76% and Zn 82.12%.

Potential of bacterial consortium for removal of cephalexin from aqueous solution

Abstract Antibiotics represent a global environmental problem due to their role in the increasing of antimicrobial resistance. Therefore, the removal of antibiotics from wastewater has received unrivalled attention in the recent years. Several technologies including the biodegradation process have been applied for this purpose. However, the potential of bacterial biomass in the biosorption of antibiotics has limited studies. The present study investigated cephalexin removal from aqueous solution by consortium bacterial cells (living and dead) which are tolerant for antibiotics. The factors including cephalexin, biomass, pH, temperature as well as presence of heavy metal ions were tested. The maximum biosorption efficiency was recorded at 0.4 mg L-1 (94.73% vs. 92.98% for living and dead cells respectively), dead cells exhibited more efficiency compared to living cells at 5 mg L-1 (82.36% vs. 46.66% respectively). Living cells are more effective at pH value between pH 4 and 6 (71.95–68.90%). The maximum removal of living cells was highest at 30 °C (80.26%), while was at 25 °C of dead cell biomass (63.81%). Remarkable percentage for cephalexin biosorption by living cells was recorded in the presence low concentrations of Ni2+ (0.21 mg L-1, 40% vs. 30% of living and dead cells, respectively). Living cells exhibited 27.42% and 25% of the removal with Cu2+ (1 mg L-1) and Pb2+ (0.4 mg L-1) respectively. In conclusion the bacterial cells biomass has a potential to remove cephalexin with some negative effects of heavy metals which can be overcome by the removal of these metal ions first and then removal of antibiotics in a second cycle.

Treatment of Wastewater From Car Washes Using Natural Coagulation and Filtration System

Wastewater generated from carwash is one of the main wastewater resources, which contribute effectively in the increasing of environmental contamination due to the chemical characteristics of the car wastes. The present work aimed to develop an integrated treatment system for carwash wastewater based on coagulation and flocculation using Moringa oleifera and Ferrous Sulphate (FeSO4.7H2O) as well as natural filtration system. The carwash wastewater samples were collected from carwash station located at Parit Raja, Johor, Malaysia. The treatment system of car wash wastewater was designed in the lab scale in four stages included, aeration, coagulation and flocculation, sedimentation and filtration. The coagulation and flocculation unit was carried out using different dosage (35, 70, 105 and 140 mg L-1) of M. oleifera and FeSO4.7H2O, respectively. The efficiency of the integrated treatment system to treat carwash wastewater and to meet Environmental Quality Act (EQA 1974) was evaluated based on the analysis of pH, dissolved oxygen (DO), chemical oxygen demand (COD) and turbidity (NTU). The integrated treatment system was efficient for treatment of raw carwash wastewater. The treated carwash wastewaters meet EQA 1974 regulation 2009 (Standards A) in the term of pH and DO while, turbidity and COD reduced in the wastewater to meet Standards B. The integrated treatment system designed here with natural coagulant (M. oleifera) and filtration unit were effective for primary treatment of carwash wastewater before the final disposal or to be reused again for carwash process.

Extraction of hydrocarbons from freshwater green microalgae (Botryococcus sp.) biomass after phycoremediation of domestic wastewater

ABSTRACT This study was undertaken to analyze the efficiency of Botryococcus sp. in the phycoremediation of domestic wastewater and to determine the variety of hydrocarbons derived from microalgal oil after phycoremediation. The study showed a significant (p < 0.05) reduction of pollutant loads of up to 93.9% chemical oxygen demand, 69.1% biochemical oxygen demand, 59.9% total nitrogen, 54.5% total organic carbon, and 36.8% phosphate. The average dry weight biomass produce was 0.1 g/L of wastewater. In addition, the dry weight biomass of Botryococcus sp. was found to contain 72.5% of crude oil. The composition analysis using Gas Chromatogram - Mass Spectrometry (GC-MS) found that phthalic acid, 2-ethylhexyltridecyl ester (C29H48O4), contributed the highest percentage (71.6%) of the total hydrocarbon compounds to the extracted algae oil. The result of the study suggests that Botryococcus sp. can be used for effective phycoremediation, as well as to provide a sustainable hydrocarbon source as a value-added chemical for the bio-based plastic industry.

Influence of pathogenic bacterial activity on growth of Scenedesmus sp. and removal of nutrients from public market wastewater

The present study aims to investigate the influence of Staphylococcus aureus, Escherichia coli and Enterococcus faecalis in public market wastewater on the removal of nutrients in terms of ammonium (NH4-) and orthophosphate (PO43) using Scenedesmus sp. The removal rates of NH4- and orthophosphate PO43- and batch kinetic coefficient of Scenedesmus sp. were investigated. The phycoremediation process was carried out at ambient temperature for 6 days. The results revealed that the pathogenic bacteria exhibited survival potential in the presence of microalgae but they were reduced by 3-4 log at the end of the treatment process. The specific removal rates of NH4- and PO43- have a strong relationship with initial concentration in the public market wastewater (R2 = 0.86 and 0.80, respectively). The kinetic coefficient of NH4- removal by Scenedesmus sp. was determined as k = 4.28 mg NH4- 1 log10 cell mL-1 d-1 and km = 52.01 mg L-1 (R2 = 0.94) while the coefficient of PO43- removal was noted as k = 1.09 mg NH4- 1 log10 cell mL-1 d-1 and km = 85.56 mg L-1 (R2 = 0.92). It can be concluded that Scenedesmus sp. has high competition from indigenous bacteria in the public market wastewater to remove nutrients, with a higher coefficient of removal of NH4- than PO43.

An overview of the utilisation of microalgae biomass derived from nutrient recycling of wet market wastewater and slaughterhouse wastewater

Microalgae have high nutritional values for aquatic organisms compared to fish meal, because microalgae cells are rich in proteins, lipids, and carbohydrates. However, the high cost for the commercial production of microalgae biomass using fresh water or artificial media limits its use as fish feed. Few studies have investigated the potential of wet market wastewater and slaughterhouse wastewater for the production of microalgae biomass. Hence, this study aims to highlight the potential of these types of wastewater as an alternative superior medium for microalgae biomass as they contain high levels of nutrients required for microalgae growth. This paper focuses on the benefits of microalgae biomass produced during the phycoremediation of wet market wastewater and slaughterhouse wastewater as fish feed. The extraction techniques for lipids and proteins as well as the studies conducted on the use of microalgae biomass as fish feed were reviewed. The results showed that microalgae biomass can be used as fish feed due to feed utilisation efficiency, physiological activity, increased resistance for several diseases, improved stress response, and improved protein retention.

Application of Phycoremediation using Microalgae Scenedesmus sp. as Wastewater Treatment in Removal of Heavy Metals from Food Stall Wastewater

This paper represents the results of using phycoremediation technology in treating the wastewater produced from food stall activity by using microalgae of Scenedesmus sp. in removal of heavy metals. Phycoremediation has advantages over physic-chemical approaches as it is can completely degrade organic pollutants without destroy the surrounding flora and fauna. Aim of this study is to determine the effectiveness of microalgae Scenedesmussp to assimilate the pollutant load based on the optimum time and concentration. Characteristics of food stall wastewater need to be identified and analyse before phycoremediation process taken place. The wastewater sampling was collected at food stall during peak time i.e. at 8 a.m. and 4 p.m. Microalgae Scenedesmus sp. to be injected to the batch reactor based on five (5) different concentration cells. The results shows that the optimum removal of heavy metals are dominant by concentration no. 1 (C1) compare to other concentration in the treatment i.e. removal of Ferum by 88.22% and 69.63%, Copper by 60% and 53.85% at both sampling time while removal of zinc is dominant by concentration no.4 (C4) by 75.61% and 76.63% respectively.