Raimund Strehl

Derivation of a Xeno‐Free Human Embryonic Stem Cell Line

Elimination of all animal material during both the derivation and long‐term culture of human embryonic stem cells (hESCs) is necessary prior to future application of hESCs in clinical cell therapy. The potential consequences of transplanting xeno‐contaminated hESCs into patients, such as an increased risk of graft rejection [Stem Cells 2006;24:221–229] and the potential transfer of nonhuman pathogens, make existing hESC lines unsuitable for clinical applications. To avoid xeno‐contamination during derivation and culture of hESCs, we first developed a xeno‐free medium supplemented with human serum, which supports long‐term (>50 passages) culture of hESCs in an undifferentiated state. To enable derivation of new xeno‐free hESCs, we also established xeno‐free human foreskin fibroblast feeders and replaced immunosurgery, which involves the use of guinea pig complement, with a modified animal‐product‐free derivation procedure. Here, we report the establishment and characterization (>20 passages) of a xeno‐free pluripotent diploid normal hESC line, SA611.

Improving expansion of pluripotent human embryonic stem cells in perfused bioreactors through oxygen control

The successful transfer of human embryonic stem cell (hESC) technology and cellular products into clinical and industrial applications needs to address issues of automation, standardization and the generation of relevant cell numbers of high quality. In this study, we combined microcarrier technology and controlled stirred tank bioreactors, to develop an efficient and scalable system for expansion of pluripotent hESCs. We demonstrate the importance of controlling pO(2) at 30% air saturation to improve hESCs growth. This concentration allowed for a higher energetic cell metabolism, increased growth rate and maximum cell concentration in contrast to 5% pO(2) where a shift to anaerobic metabolism was observed, decreasing cell expansion 3-fold. Importantly, the incorporation of an automated perfusion system in the bioreactor enhanced culture performance and allowed the continuous addition of small molecules assuring higher cell concentrations for a longer time period. The expanded hESCs retained their undifferentiated phenotype and pluripotency. Our results show, for the first time, that the use of controlled bioreactors is critical to ensure the production of high quality hESCs. When compared to the standard colony culture, our strategy improves the final yield of hESCs by 12-fold, providing a potential bioprocess to be transferred to clinical and industrial applications.

Coculture of Human Embryonic Stem Cells and Human Articular Chondrocytes Results in Significantly Altered Phenotype and Improved Chondrogenic Differentiation

Human embryonic stem (hES) cells have been suggested as a cell source for the repair of cartilage lesions. Here we studied how coculture with human articular chondrocytes affects the expansion potential, morphology, expression of surface markers, and differentiation abilities of hES cells, with special regard to chondrogenic differentiation. Undifferentiated hES cells were cocultured with irradiated neonatal or adult articular chondrocytes in high‐density pellet mass cultures for 14 days. Cocultured hES cells were then expanded on plastic and their differentiation potential toward the adipogenic, osteogenic, and chondrogenic lineages was compared with that of undifferentiated hES cells. The expression of different surface markers was investigated using flow cytometry and teratoma formation was studied using injection of the cells under the kidney capsule. Our results demonstrate that although hES cells have to be grown on Matrigel, the cocultured hES cells could be massively expanded on plastic with a morphology and expression of surface markers similar to mesenchymal stem cells. Coculture further resulted in a more homogenous pellet and significantly increased cartilage matrix production, both in high‐density pellet mass cultures and hyaluronan‐based scaffolds. Moreover, cocultured cells formed colonies in agarose suspension culture, also demonstrating differentiation toward chondroprogenitor cells, whereas no colonies were detected in the hES cell cultures. Coculture further resulted in a significantly decreased osteogenic potential. No teratoma formation was detected. Our results confirm the potential of the culture microenvironment to influence hES cell morphology, expansion potential, and differentiation abilities over several population doublings. STEM CELLS 2009;27:1812–1821

Human embryonic stem cell-derived mesenchymal progenitors—Potential in regenerative medicine

Tissue engineering and cell therapy require large-scale production of homogeneous populations of lineage-restricted progenitor cells that easily can be induced to differentiate into a specific tissue. We have developed straightforward protocols for the establishment of human embryonic stem (hES) cell-derived mesenchymal progenitor (hES-MP) cell lines. The reproducibility was proven by derivation of multiple hES-MP cell lines from 10 different hES cell lines. To illustrate clinical applicability, a xeno-free hES-MP cell line was also derived. None of the markers characteristic for undifferentiated hES cells were detected in the hES-MP cells. Instead, these cells were highly similar to mesenchymal stem cells with regard to morphology and expression of markers. The safety of hES-MP cells following transplantation was studied in severely combined immunodeficient (SCID) mice. The implanted hES-MP cells gave rise to homogeneous, well-differentiated tissues exclusively of mesenchymal origin and no teratoma formation was observed. These cells further have the potential to differentiate toward the osteogenic, adipogenic, and chondrogenic lineages in vitro. The possibility of easily and reproducibly generating highly expandable hES-MP cell lines from well-characterized hES cell lines with differentiation potential into several mesodermal tissues entails an enormous potential for the field of regenerative medicine.

Large-scale propagation of four undifferentiated human embryonic stem cell lines in a feeder-free culture system.

We describe an improved and more robust protocol for transfer and subsequent propagation of human embryonic stem cells under feeder‐free conditions. The results show that mechanical dissociation for transfer of the human embryonic stem cells to Matrigel™ resulted in highest survival rates. For passage of the cultures on the other hand, enzymatic dissociation was found to be most efficient. In addition, this method reduces the time, work, and skills needed for propagation of the human embryonic stem cells. With the present protocol, the human embryonic stem cells have been cultured under feeder‐free conditions for up to 35 passages while maintaining a normal karyotype, stable proliferation rate, and high telomerase activity. Furthermore, the feeder‐free human embryonic stem cell cultures express the transcription factor Oct‐4, alkaline phosphatase, and cell surface markers SSEA‐3, SSEA‐4, Tra 1‐60, Tra 1‐81, and formed teratomas in severe combined immunodeficient mice. This method provides distinct advantages compared with previous protocols and make propagation of human embryonic stem cells less laborious and more efficient. Developmental Dynamics 233:1304–1314, 2005.

Physiological and cell biological aspects of perfusion culture technique employed to generate differentiated tissues for long term biomaterial testing and tissue engineering

Optimal results in biomaterial testing and tissue engineering under in vitro conditions can only be expected when the tissue generated resembles the original tissue as closely as possible. However, most of the presently used stagnant cell culture models do not produce the necessary degree of cellular differentiation, since important morphological, physiological, and biochemical characteristics disappear, while atypical features arise. To reach a high degree of cellular differentiation and to optimize the cellular environment, an advanced culture technology allowing the regulation of differentiation on different cellular levels was developed. By the use of tissue carriers, a variety of biomaterials or individually selected scaffolds could be tested for optimal tissue development. The tissue carriers are to be placed in perfusion culture containers, which are constantly supplied with fresh medium to avoid an accumulation of harmful metabolic products. The perfusion of medium creates a constant microenvironment with serum-containing or serum-free media. By this technique, tissues could be used for biomaterial or scaffold testing either in a proliferative or in a postmitotic phase, as is observed during natural development. The present paper summarizes technical developments, physiological parameters, cell biological reactions, and theoretical considerations for an optimal tissue development in the field of perfusion culture.

Proliferating Cells versus Differentiated Cells in Tissue Engineering

The efficiency of cell or tissue cultures is usually judged by how quickly confluence is reached within a Petri dish or on a scaffold. Growth factors and fetal bovine serum are employed to drive cultured cells from one mitosis to the next as quickly as possible. The tissue specific interphase is extremely short under these conditions, so that the degree of differentiation desired in tissue engineering cannot be achieved. To reach the goal of functional differentiation in vitro mitosis and interphase must be separated experimentally and tailored to the specific requirements of the cell-type used. This could be achieved by a three step concept for tissue-engineering in vitro as we present here. The expansion phase is followed by a phase in which tissue differentiation is initiated. The final phase serves to express and maintain histotypical differentiation of the generated tissue.

Modulation of Cell Differentiation in Perfusion Culture

An in vitro model was used to investigate the terminal differentiation mechanisms leading from embryonic to adult renal tissue. For these experiments the capsula fibrosa with adherent embryonic tissue was isolated from neonatal rabbit kidneys. These explants were mounted onto special tissue carriers and cultured in medium containing serum for 24 h. During that time collecting duct (CD) cells grew out and formed a monolayered epithelium covering the whole surface of the explant. The carriers were then transferred to perfusion culture containers to obtain an optimal degree of differentiation. A special type of container allowed us to continuously superfuse the epithelia with individual media on the luminal and basal sides. Using this method it became possible to culture embryonic CD epithelia in a fluid gradient for weeks. The epithelia were superfused with standard Iscove’s modified Dulbecco’s medium (IMDM) on the basal side, while IMDM containing additional NaCl was used on the luminal side. In controls IMDM was superfused on both the luminal and basal sides. It was found that the degree of differentiation in the CD epithelia is dependent on the influence of fluid gradient exposure. Perfusion culture under isotonic conditions revealed that less than 5% of cells were immunopositive for principal and intercalated cell features, while epithelia cultured in a luminal-basal gradient showed more than 80% positive cells. Immunoreactivity for characteristic markers started to develop after an unexpectedly long latent period of 3–6 days, then increased continuously during the following 5 days and reached a maximum on day 14. After switching back from the gradient to isotonic culture conditions the immunoreactivity for some markers decreased within 5 days, while other characteristic features remained stable. Thus, differentiation was not only under the control of growth factors but was also regulated by the electrolyte environment.

Tissue factory: conceptual design of a modular system for the in vitro generation of functional tissues.

Tissue factory is a modular system designed to generate artificial tissues under optimal perfusion culture conditions. The microenvironment within the culture containers can be fine-tuned to meet the physiological needs of individual tissues, so that the generation of differentiated three-dimensional tissue constructs becomes possible. An optimal physiological environment is created by modulating a liquid phase as well as an artificial interstitium surrounding the growing construct. An innovative construction principle allows production of tissue culture containers, gas exchangers, and gas expanders at minimal material expenditure. Therefore it will be possible for the first time to produce sterile one-way perfusion culture modules for the generation of artificial tissues. The modules can be used separately as well as in a combined module. The system is designed to provide a possible platform for the standardized production of artificial tissues for future applications in biomedicine.

Advanced technique for long term culture of epithelia in a continuous luminal basal medium gradient

The majority of epithelia in our organism perform barrier functions on being exposed to different fluids at the luminal and basal sides. To simulate this natural situation under in vitro conditions for biomaterial testing and tissue engineering the epithelia have to withstand mechanical and fluid stress over a prolonged period of time. Leakage, edge damage and pressure differences in the culture system have to be avoided so that the epithelial barrier function is maintained. Besides, the environmental influences on important cell biological features such as, sealing or transport functions, have to remain upregulated and a loss of characteristics by dedifferentiation is prevented. Our aim is to expose embryonic renal collecting duct (CD) epithelia as model tissue for 14 days to fluid gradients and to monitor the development of tissue-specific features. For these experiments, cultured embryonic epithelia are placed in tissue carriers and in gradient containers, where different media are superfused at the luminal and basal sides. Epithelia growing on the tissue carriers act as a physiological barrier during the whole culture period. To avoid mechanical damage of the tissue and to suppress fluid pressure differences between the luminal and basal compartments improved transport of the medium and an elimination of unilaterally accumulated gas bubbles in the gradient container compartments by newly developed gas expander modules is introduced. By the application of these tools the yield of embryonic renal collecting duct epithelia with intact barrier function on a fragile natural support material could be increased significantly as compared to earlier experiments. Epithelia treated with a luminal NaCl load ranging from 3 to 24 mmol l were analyzed by immunohistochemical methods to determine the degree of differentiation. The tissue showed an upregulation of individual CD cell features as compared to embryonic epithelia in the neonatal kidney.