Rainer Quinkertz

Validation of Advanced Steam Turbine Technology: A Case Study of an Ultra Super Critical Steam Turbine Power Plant

High efficiency and flexible operation continue to be the major requirements for power generation because of the benefits of reduced emissions and reduced fuel consumption, i.e. reduced operating costs. Ultra super critical (USC) steam parameters are the basis for state of the art technology of coal fired power plants with highest efficiency. An important part of the development process for advanced steam turbines is product validation. This step involves more than just providing evidence of customer guaranteed values (e.g. heat rate or electric output). It also involves proving that the design targets have been achieved and that the operational experience is fed back to designers to further develop the design criteria and enable the next step in the development of highly sophisticated products. What makes product validation for large size power plant steam turbines especially challenging is the fact that, due to the high costs of the required infrastructure, steam turbine manufacturers usually do not have a full scope / full scale testing facility. Therefore, good customer relations are the key to successful validation. This paper describes an extensive validation program for a modern state of the art ultra supercritical steam turbine performed at an operating 1000 MW steam power plant in China. Several measuring points in addition to the standard operating measurements were installed at one of the high pressure turbines to record the temperature distribution, e.g. to verify the functionality of the internal cooling system, which is an advanced design feature of the installed modern high pressure steam turbines. Predicted 3D temperature distributions are compared to the actual measurements in order to verify and evaluate the design rules and the design philosophy applied. Conclusions are drawn regarding the performance of modern 3D design tools applied in the current design process and an outlook is given on the future potential of modern USC turbines.Copyright

Development of Steam Turbines for State of the Art Combined Cycle Power Plants (CCPP)

In order to reduce CO2 emissions, reduce capital costs and increase the percentage of renewable energy in the electricity grid, common drivers of fossil power plant evolution continue to be efficiency, increased electricity output and operating flexibility.For CCPP, the efficiency level has reached more than 60%. Besides new and updated gas turbine frames, an improved bottoming cycle also contributes to this achievement. Without increasing steam temperatures above 565°C, improving steam turbine inner efficiency and enhancing the cold end, the overall efficiency of >60% would not be feasible.Extensive thermodynamic optimization is required to determine steam temperatures and condenser pressures. In addition, from a design standpoint, an optimum product strategy has to be developed. In order to minimize risks with future designs, both the practical and theoretical experiences from both ultra super critical applications at coal-fired steam power plants as well as from the CCPP steam turbine fleet have to be incorporated. For advanced technologies and components appropriate validation programs have to be defined.This paper presents the approach being taking to develop steam turbines for CCPP with modern gas turbines and it also displays the operating results of the first unit.Operational validation included the thermal behaviour of the high and intermediate pressure parts, a new last stage blade for the low pressure turbine and a patented start-up procedure. In particular, the paper focuses on the validation of three dimensional CFD calculations of the high and intermediate pressure turbine.Copyright

State of the Art Steam Turbine Automation for Optimum Transient Operation Performance

The growing share of renewable energies in the power industry coupled with increased deregulation has led to the need for additional operating flexibility of steam turbine units in both Combined Cycle and Steam Power Plants. Siemens steam turbine engineering and controls presently have several solutions to address various operating requirements: - Use of an automatic step program to perform startups allows operating comfort and repeatability. - 3 start-up modes give the operator the flexibility to start quickly to meet demand or slowly to conserve turbine life. - Several options for lifetime management are available. These options range from a basic counter of equivalent operating hours to a detailed fatigue calculation. - Restarting capabilities have been improved to allow a faster response following a trip or shutdown. - In addition to control of speed, load and pressure, special control functions provide alternative work split modes during transient conditions. - Optimum steam temperatures are calculated by the steam turbine control system to achieve optimum startup performance. - Siemens steam turbines are also capable of load rejection to house load, some even to operation at full speed, no load. Several plants are already equipped with these solutions and have provided data showing they are operating with shorter start-up times and improved load rejection capabilities. Finally Siemens of course continues to pursue future development.Copyright