Rajendra Dulal
The Catholic University of America
Network
Latest external collaboration on country level. Dive into details by clicking on the dots.
Publication
Featured researches published by Rajendra Dulal.
Journal of Vacuum Science & Technology. B. Nanotechnology and Microelectronics: Materials, Processing, Measurement, and Phenomena | 2016
Bishnu Dahal; Rajendra Dulal; Ian L. Pegg; John Philip
Transition metal telluride CoTe nanostructures have been synthesized using a wet-chemical method. These nanostructures exhibit NiAs-type hexagonal crystal structure with a space group of P63/mmc. The magnetic measurements show spontaneous magnetization and hysteresis, and the coercivity increases with a decrease in temperature. The saturation magnetization was calculated to be around 0.2 μB/Co atom. The magnetic transition temperature was found to be above room temperature similar to that of the bulk CoTe. The measured bandgap of the nanostructures is 2.15 eV and they exhibit p-type semiconducting behavior.
Materials Research Express | 2016
Bishnu Dahal; Rajendra Dulal; Ian L. Pegg; John Philip
Transition metal telluride, Co1+δ Te nanostructures are synthesized using the hydrothermal method. These nanostructures exhibit filled NiAs-type hexagonal crystal structure also known as Ni2In structure with the space group p63/mmc. The Co1+ δ Te nanostructures exhibit hard ferrimagnetic behavior below 40 K. The coercivity increases with the decrease in temperature, which is around 4.90 kOe at 3 K. The saturation magnetization is 0.6 μ B/Co atom. Electrical transport measurements show that the Co1+ δ Te nanostructures are nonmetallic in nature with the resistance increases with the decrease in temperature. It does not follow the thermal excitation law for semiconductors, but can be explained by the Motts three-dimensional variable range hopping model.
Journal of Vacuum Science & Technology. B. Nanotechnology and Microelectronics: Materials, Processing, Measurement, and Phenomena | 2015
Rajendra Dulal; Bishnu Dahal; Ian L. Pegg; John Philip
The authors have successfully grown one of the higher manganese silicides, Mn4Si7 thin films on silicon (100) substrates using an ultrahigh vacuum deposition with a base pressure of 1 × 10−9 Torr. The thickness of the film was varied from 65 to 100 nm. These films exhibit a tetragonal crystal structure and display paramagnetic behavior as predicted for the stoichiometric Mn4Si7 system. They have a resistivity of 3.32 × 10−5 Ω m at room temperature and show a semimetallic nature.
Journal of Vacuum Science & Technology. B. Nanotechnology and Microelectronics: Materials, Processing, Measurement, and Phenomena | 2018
Rajendra Dulal; Bishnu Dahal; Andrew Forbes; Niraj Bhattarai; Ian L. Pegg; John Philip
The authors have successfully grown Fe2CrAl nanowires on polished Si/SiO2 substrates using the electrospinning method. The diameter of nanowires varies from 50 to 300 nm. These nanowires exhibit a cubic crystal structure with lattice disorder. The nanowires are ferromagnetic with a Curie temperature greater than 400 K, much higher than that the bulk reported value. This higher Curie temperature is attributable to disordering in lattice sites, which causes an enhanced exchange interaction between pairs of iron atoms.
Journal of Vacuum Science & Technology. B. Nanotechnology and Microelectronics: Materials, Processing, Measurement, and Phenomena | 2015
Keshab R. Sapkota; Rajendra Dulal; Bishnu Dahal; Ian L. Pegg; John Philip
The Cd1−xMnxTe (x = 0–0.18) nanowires were grown using a wet-chemical synthesis. The synthesized Cd1−xMnxTe nanowires have diameters in the range of 50–100 nm and display zinc-blend crystal structure. In bulk, Cd1−xMnxTe is extensively studied, but the difficulty in doping Mn in CdTe nanowires delayed the understanding of the properties at the nanoscale. The authors have used a cation exchange method to incorporate Mn in CdTe nanowires. Their magnetic behavior can be tuned by varying the concentration of Mn ions. The CdTe nanowires were paramagnetic while doping small amount of Mn ions introduces ferromagnetic behavior at low temperatures. As the manganese concentration is increased in CdTe, both spin glass and antiferromagnetic behaviors are observed. This is in contrast to what is observed in bulk, where only paramagnetic behavior is observed for x < 0.17.The Cd1−xMnxTe (x = 0–0.18) nanowires were grown using a wet-chemical synthesis. The synthesized Cd1−xMnxTe nanowires have diameters in the range of 50–100 nm and display zinc-blend crystal structure. In bulk, Cd1−xMnxTe is extensively studied, but the difficulty in doping Mn in CdTe nanowires delayed the understanding of the properties at the nanoscale. The authors have used a cation exchange method to incorporate Mn in CdTe nanowires. Their magnetic behavior can be tuned by varying the concentration of Mn ions. The CdTe nanowires were paramagnetic while doping small amount of Mn ions introduces ferromagnetic behavior at low temperatures. As the manganese concentration is increased in CdTe, both spin glass and antiferromagnetic behaviors are observed. This is in contrast to what is observed in bulk, where only paramagnetic behavior is observed for x < 0.17.
Journal of Magnetism and Magnetic Materials | 2017
Rajendra Dulal; Bishnu Dahal; Andrew Forbes; Ian L. Pegg; John Philip
Bulletin of the American Physical Society | 2018
Rajendra Dulal; Bishnu Dahal; Andrew Forbes; Niraj Bhattarai; Ian L. Pegg; John Philip
Solid State Communications | 2017
Bishnu Dahal; Rajendra Dulal; Ian L. Pegg; John Philip
Bulletin of the American Physical Society | 2016
Rajendra Dulal; Bishnu Dahal; Ian L. Pegg; John Philip
Bulletin of the American Physical Society | 2015
Bishnu Dahal; Keshab R. Sapkota; Rajendra Dulal; Ian L. Pegg; John Philip