Rajmund Mokso

In Vivo Time- Resolved Microtomography Reveals the Mechanics of the Blowfly Flight Motor

Time-resolved X-ray microtomography permits a real-time view of the blowfly in flight at a previously unprecedented level of detail, revealing how the tiny steering muscles work.

A comparative study of X-ray tomographic microscopy on shales at different synchrotron facilities: ALS, APS and SLS.

The 3D microstructure of shales is important to assess elastic anisotropic characteristics. In this study, microporosity and mineral components in two shale samples were investigated with X-ray tomographic microscopy at three synchrotron facilities: ALS, APS and SLS, and excellent agreement was observed.

Pitting corrosion of stainless steel: measuring and modelling pit propagation in support of damage prediction for radioactive waste containers

Abstract In situ synchrotron radiography has been used to observe the evolution of two-dimensional pits growing in stainless steel foils under electrochemical control in chloride solutions. A method for extracting the key kinetic parameters from radiographs is under development to provide data for validating and calibrating a two-dimensional finite element model previously developed by Laycock and White. The local current density along the boundary of a pit is directly measured from the radiographs. Then, the local metal ion concentration and potential drop inside the pit cavity are backcalculated using transport equations and the requirement to maintain charge neutrality, giving the relationship between current density, solution composition and interfacial potential. Preliminary comparisons show qualitative correlation between the model and extracted data; quantitative comparison is under way.

Four-dimensional in vivo X-ray microscopy with projection-guided gating

Visualizing fast micrometer scale internal movements of small animals is a key challenge for functional anatomy, physiology and biomechanics. We combine phase contrast tomographic microscopy (down to 3.3 μm voxel size) with retrospective, projection-based gating (in the order of hundreds of microseconds) to improve the spatiotemporal resolution by an order of magnitude over previous studies. We demonstrate our method by visualizing 20 three-dimensional snapshots through the 150 Hz oscillations of the blowfly flight motor.

An updated phylogeny of Anisoptera including formal convergence analysis of morphological characters

Family interrelationships among Anisoptera (dragonflies) are unresolved. Molecular markers applied thus far have not been particularly useful for resolving relationships at the family level. Previous morphological studies have depended heavily on characters of wing venation and articulation which are believed to display considerable degrees of homoplasy due to adaptations to different flight modes. Here, we present a comprehensive anatomical dataset of the head morphology of Anisoptera focusing on muscle organization and endoskeletal features covering nearly all families. The characters are illustrated in detail and incorporated into an updated morphological character matrix covering all parts of the dragonfly body. Phylogenetic analysis recovers all families as monophyletic clades except Corduliidae, Gomphidae as sister group to all remaining Anisoptera, and Austropetaliidae as sister group to Aeshnidae (=Aeshnoidea). The position of Petaluridae and Aeshnoidea to each other could not be resolved. Libelluloidea is monophyletic with Neopetalia and Cordulegastridae as first splits. Chlorogomphidae is sister to monophyletic [Synthemistidae + (‘Corduliidae’ + Libellulidae)]. In addition, we applied a recently published formal approach to detect concerted convergence in morphological data matrices and uncover possible homoplasies. Analyses show that especially head and thorax characters may harbour homoplasies. After exclusion of possible homoplastic characters, Gomphidae is corroborated as sister group to all remaining Anisoptera.

Dose optimization approach to fast X-ray microtomography of the lung alveoli

A framework for linking image quality to radiation dose in order to optimize experimental parameters with respect to dose reduction is presented.

Synchrotron-based tomographic microscopy (SbTM) of wood

Abstract To understand better the structure-property relationships of wood in situ, nondestructive synchrotron-based tomographic microscopy (SbTM) with subcellular resolution is useful. In this context, an in situ testing device was developed to determine the cellular response of wood to mechanical loading. Different rotationally symmetric specimens were tested to synchronize the failure areas to the given scanning areas. Norway spruce samples were uniaxially compressed in the longitudinal direction and scanned in situ at several increasing relative forces ending up in the plastic deformation regime. A sufficiently high quality in situ tomography was demonstrated. The reconstructed data allowed the observation of the load-dependent development of failure regions: cracks and buckling on the microstructure were clearly visible. Future investigations with SbTM on different wood species, loading directions, and different moisture contents are promising in terms of the micromechanical behavior of wood.

Microstructure characteristics during hydrate formation and dissociation revealed by X-ray tomographic microscopy

AbstractDespite much progress over the past years in fundamental gas hydrate research, frontiers to the unknown are the early beginning and early decomposition of gas hydrates in their natural, submarine environment: gas bubbles meeting ocean water and forming hydrate, and gas starting to escape from the surface of a hydrate grain. In this paper we report on both of these topics, and present three-dimensional microstructure results obtained by synchrotron radiation X-ray cryo-tomographic microscopy (SRXCTM). Hydrates can precipitate when hydrate-forming molecules such as methane exceed solubility, and combine with water within the gas hydrate stability zone. Here we show hydrate formation on surfaces of bubbles from different gas mixtures and seawater, based on underwater robotic in situ experiments in the deep Monterey Canyon, offshore California. Hydrate begins to form from the surrounding water on the bubble surfaces, and subsequently grows inward into the bubble, evidenced by distinct edges. Over time, the bubbles become smaller while gas is being incorporated into newly formed hydrate. In contrast, current understanding has been that hydrate decomposition starts on the outer surface of hydrate aggregates and grains. It is shown that in an early stage of decomposition, newly found tube structures connect well-preserved gas hydrate patches to areas that are dissociating, demonstrating how dissociating areas in a hydrate grain are linked through hydrate that is still intact and will likely decompose at a later stage. FigureThe boundaries of a gas hydrate grain: excepting for the matrix (transparent, not shown), one can see tubular structures, pores from decomposition, and bubbles.

Halo suppression in full-field x-ray Zernike phase contrast microscopy

Visible light Zernike phase contrast (ZPC) microscopy is a well established method for imaging weakly absorbing samples. The method is also used with hard x-ray photon energies for structural evaluation of material science and biological applications. However, the method suffers from artifacts that are inherent for the Zernike image formation. In this Letter, we investigate their origin and experimentally show how to suppress them in x-ray full-field ZPC microscopy based on diffractive x-ray optics.

Location, location & size: defects close to surfaces dominate fatigue crack initiation

Metallic cast components inevitably contain defects such as shrinkage cavities which are inherent to the solidification process. Those defects are known to significantly alter the fatigue life of components. Yet very little is known, quantitatively, on the dangerosity of internal casting defects compared to surface ones. In this study, fatigue specimens containing controlled internal defects (shrinkage pores) are used to foster internal cracking. In situ fatigue tests monitored by X ray synchrotron tomography revealed that the internal nucleation and propagation of cracks was systematically overran by surface cracking initiated at castings defects up to ten times smaller than the internal ones. These findings indicate that the presence of internal defects in cast components can be tolerated to a larger extent than is allowed by nowadays standards