Rakesh Banerjee

Thermal and pH responsive polymer-tethered multifunctional magnetic nanoparticles for targeted delivery of anticancer drug.

Targeted and efficient delivery of therapeutics to tumor cells is one of the key issues in cancer therapy. In the present work, we report a temperature and pH dual responsive core-shell nanoparticles comprising smart polymer shell coated on magnetic nanoparticles as an anticancer drug carrier and cancer cell-specific targeting agent. Magnetite nanoparticles (MNPs), prepared by a simple coprecipitation method, was surface modified by introducing amine groups using 3-aminopropyltriethoxysilane. Dual-responsive poly(N-isopropylacrylamide)-block-poly(acrylic acid) copolymer, synthesized by reversible addition-fragmentation chain transfer (RAFT) polymerization, was then attached to the amine-functionalized MNPs via EDC/NHS method. Further, to accomplish cancer-specific targeting properties, folic acid was tethered to the surface of the nanoparticles. Thereafter, rhodamine B isothiocyanate was conjugated to endow fluorescent property to the MNPs required for cellular imaging applications. The nanoparticles were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), selected area electron diffraction (SAED), field emission scanning electron microscopy (FESEM), energy-dispersive X-ray spectroscopy (EDX), thermogravimetric analysis (TGA), zeta potential, vibrating sample magnetometer (VSM), X-ray photoelectron spectroscopy (XPS) measurements, and FTIR, UV-vis spectral analysis. Doxorubicin (DOX), an anticancer drug used for the present study, was loaded into the nanoparticles and its release behavior was subsequently studied. Result showed a sustained release of DOX preferentially at the desired lysosomal pH and temperature condition. The biological activity of the DOX-loaded MNPs was studied by MTT assay, fluorescence microscopy, and apoptosis. Intracellular-uptake studies revealed preferential uptake of these nanoparticles into cancer cells (HeLa cells) compared to normal fibroblast cells (L929 cells). The in vitro apoptosis study revealed that the DOX-loaded nanoparticles caused significant death to the HeLa cells. These nanoparticles were capable of target specific release of the loaded drug in response to pH and temperature and hence may serve as a potential drug carrier for in vivo applications.

pH-induced vesicle-to-micelle transition in amphiphilic diblock copolymer: investigation by energy transfer between in situ formed polymer embedded gold nanoparticles and fluorescent dye.

The ability to regulate the formation of nanostructures through self-assembly of amphiphilic block copolymers is of immense significance in the field of biology and medicine. In this work, a new block copolymer synthesized by using reversible addition-fragmentation chain transfer (RAFT) polymerization technique from poly(ethylene glycol) monomethyl ether acrylate (PEGMA) and Boc-l-tryptophan acryloyloxyethyl ester (Boc-l-trp-HEA) was found to spontaneously form pH-responsive water-soluble nanostructures after removal of the Boc group. While polymer vesicles or polymerosomes were formed at physiological pH, the micelles were formed at acidic pH (< 5.2), and this facilitated a pH-induced reversible vesicle-to-micelle transition. Formation of these nanostructures was confirmed by different characterization techniques, viz. transmission electron microscopy, dynamic light scattering, and steady-state fluorescence measurements. Further, these vesicles were successfully utilized to reduce HAuCl4 and stabilize the resulting gold nanoparticles (AuNPs). These AuNPs, confined within the hydrophobic shell of the vesicles, could participate in energy transfer process with fluorescent dye molecules encapsulated in the core of the vesicles, thus forming a nanometal surface energy transfer (NSET) pair. Subsequently, following the efficiency of energy transfer between this pair, it was possible to monitor the process of transition from vesicles to micelles. Thus, in this work, we have successfully demonstrated that NSET can be used to follow the transition between nanostructures formed by amphiphilic block copolymers.

Polymer grafted magnetic nanoparticles for delivery of anticancer drug at lower pH and elevated temperature

Efficient and controlled delivery of therapeutics to tumor cells is one of the important issues in cancer therapy. In the present work, a series of pH- and temperature-responsive polymer grafted iron oxide nanoparticles were prepared by simple coupling of aminated iron oxide nanoparticle with poly(N-isopropylacrylamide-ran-poly(ethylene glycol) methyl ether acrylate)-block-poly(acrylic acid) (P(NIPA-r-PEGMEA)-b-PAA). For this, three water soluble block polymers were prepared via reversible addition fragmentation transfer (RAFT) polymerization technique. At first, three different block copolymers were prepared by polymerizing mixture of NIPA and PEGMEA (with varying mole ratio) in presence of poly(tert-butyl acrylate) (PtBA) macro chain transfer agent. Subsequently, P(NIPA-r-PEGMEA)-b-PAA copolymers were synthesized by hydrolyzing tert-butyl acrylate groups of the P(NIPA-r-PEGMEA)-b-PtBA copolymers. The resulting polymers were then grafted to iron oxide nanoparticles, and these functionalized nanoparticles were thoroughly characterized by X-ray diffraction (XRD), thermogravimetric analysis (TGA), zeta potential measurements, transmission electron microscopy (TEM), field emission scanning electron microscopy (FESEM), vibrating sample magnetometer (VSM) and Fourier transform infrared spectroscopy (FTIR). Doxorubicin (DOX), an anti-cancer drug, was loaded into the polymer coated nanoparticles and its release behavior was subsequently studied at different pH and temperatures. The drug release pattern revealed a sustained release of DOX preferentially at the desired lysosomal pH of cancer cells (pH 5.0) and slightly above the physiological temperature depending upon the composition of the copolymers. The potential anticancer activity of the polymer grafted DOX loaded nanoparticles were established by MTT assay and apoptosis study of cervical cancer ME 180cells in presence of the nanoparticles. Thus, these particles can be utilized for controlled delivery of anticancer drugs at the desired lysosomal pH and/or by slightly heating the cells using magnetic hyperthermia.

Synthesis, photophysical and photochemical properties of photoacid generators based on N-hydroxyanthracene-1,9-dicarboxyimide and their application toward modification of silicon surfaces.

We have introduced a series of nonionic photoacid generators (PAGs) for carboxylic and sulfonic acids based on N-hydroxyanthracene-1,9-dicarboxyimide (HADI). The newly synthesized PAGs exhibited positive solvachromatic emission (λ(max)(hexane) 461 nm, λ(max)(ethanol) 505 nm) as a function of solvent polarity. Irradiation of PAGs in acetonitrile (ACN) using UV light above 410 nm resulted in the cleavage of weak N-O bonds, leading to the generation of carboxylic and sulfonic acids in good quantum and chemical yields. Mechanism for the homolytic N-O bond cleavage for acid generation was supported by time-dependent density functional theory (TD-DFT) calculations. More importantly, using the PAG monomer N-(p-vinylbenzenesulfonyloxy)anthracene-1,9-dicarboxyimide (VBSADI), we have synthesized N-(p-vinylbenzenesulfonyloxy)anthracene-1,9-dicarboxyimide-methyl methacrylate (VBSADI-MMA) and N-(p-vinylbenzenesulfonyloxy)anthracene-1,9-dicarboxyimide-ethyl acrylate (VBSADI-EA) copolymer through atom transfer radical polymerization (ATRP). Finally, we have also developed photoresponsive organosilicon surfaces using the aforementioned polymers.

Functional Group-Dependent Self-Assembled Nanostructures from Thermo-Responsive Triblock Copolymers

The ability to control the formation of nanostructures through self-assembly of amphiphilic block copolymers is of great interest in the field of biology and catalysis. In this work we have studied the self-assembling behavior of a new class of thermo-responsive triblock copolymers containing poly(ethylene glycol), and demonstrated the manner in which the aggregation pattern changed on simple functional group transformation on the copolymers. Two different triblock copolymers, poly(ethylene glycol)-b-poly(N-ispropylacrylamide)-b-poly(t-butyl acrylate) (P1) and poly(ethylene glycol)-b-poly(N-isopropylacrylamide)-b-poly(glycidyl methacrylate) (P2) were synthesized using reversible addition-fragmentation chain transfer (RAFT) technique. It was observed that P1 and P2 displayed different temperature dependent solution properties in water, with P1 forming micelles above the LCST of the PNIPA while P2 showing macroscopic phase separation under similar conditions. Thereafter, the tert-butyl group of P1 was converted to the corresponding acid (P1a) and the epoxy groups of P2 was converted to diols (P2a), thus transforming the hydrophobic blocks to hydrophilic ones. Quite interestingly, such transformations led to significant changes in their self-assembling behavior, as both P1a and P2a were seen to form vesicles beyond the LCST of PNIPA. Changes in the hydrophilic fraction in the block copolymers by subtle changes in the functionality and temperature led to the formation of varied nanostructured assemblies, as evident from dynamic light scattering (DLS), transmisison electron microscopy (TEM), and steady-state fluorescence analysis. Such formation of thermo-responsive vesicles induced by simple structural changes in the copolymers is quite interesting and highly significant in drug delivery applications.

Development of 1-hydroxy-2(1H)-quinolone-based photoacid generators and photoresponsive polymer surfaces.

A new class of carboxylate and sulfonate esters of 1-hydroxy-2(1H)-quinolone has been demonstrated as nonionic photoacid generators (PAGs). Irradiation of carboxylates and sulfonates of 1-hydroxy-2(1H)-quinolone by UV light (λ≥310 nm) resulted in homolysis of weak N-O bond leading to efficient generation of carboxylic and sulfonic acids, respectively. The mechanism for the homolytic N-O bond cleavage was supported by time-dependent DFT calculations. Photoresponsive 1-(p-styrenesulfonyloxy)-2-quinolone-methyl methacrylate (SSQL-MMA) and 1-(p-styrenesulfonyloxy)-2-quinolone-lauryl acrylate (SSQL-LA) copolymers were synthesized from PAG monomer 1-(p-styrenesulfonyloxy)-2-quinolone, and subsequently controlled surface wettability was demonstrated for the above-mentioned photoresponsive polymers.

Synthesis of soluble core cross-linked polystyrene star polymer by application of acrylate-nitrile oxide ‘click chemistry’ using metal-free reagents

In the present work, we have established a novel and environmentally benign method, whereby a 1,3-dipolar cycloaddition reaction has been applied using a non-toxic reagent, iodosobenzenediacetate [PhI(OAc)2], instead of the conventional copper-based reagents for the development of star-branched polymers. Here we have demonstrated the synthesis of core cross-linked star (CCS) polymers via the formation of isoxazoline ring using ‘click reaction’ between acrylate functionalities in a polymer chain and in situ generated nitrile oxide groups from a cross-linker added externally. In the initial step, a well-defined styrenic block copolymer with acrylate-functionalized middle-block was synthesized by controlled radical polymerization (RAFT) using α,α′-xylyl-bis(dithiobenzoate) as a chain transfer agent using 4-vinyl benzyl chloride and styrene as comonomers. Thereafter, the chlorobenzyl groups were converted into acrylate by reaction with acrylic acid. In the following step, core cross-linked star (CCS) polymers were synthesized by reacting the above block copolymer and oxime-functionalized cross-linkers (bi- and tetra-functional) using PhI(OAc)2 ‘click chemistry’. Formation of CCS polymers was confirmed from NMR, FTIR, GPC and DLS studies.

Photoresponsive polymers based on a coumarin moiety for the controlled release of pesticide 2,4-D

We report an excellent photoresponsive controlled release formulation based on a coumarin copolymer for pesticide 2,4-D. In the present work, acrylate and polyethylene glycol (PEG) based coumarin photoresponsive polymers were synthesised. The newly synthesised coumarin based polymers exhibited dual functionalities, namely as “fluorophores” and “phototriggers” for the controlled release of pesticide 2,4-D. The fluorescence properties of coumarin based polymers helped us to monitor the release of 2,4-D from the polymeric formulation. Release of the pesticide by coumarin based polymers was achieved on exposure to UV light. TGA results indicated that the coumarin polymer encapsulated pesticide has a good thermal stability compared to the free pesticide 2,4-D. A further leaching experiment also showed that the polymer encapsulated pesticide leaches slowly compared to the free pesticide 2,4-D. Bioassay studies in a plant suggest that the coumarin polymer encapsulated pesticide efficiently delivered 2,4-D inside the plant tissues (pumpkin plant Cucurbita maxima) improving its herbicidal activity. Our results indicated that use of a fluorescent coumarin polymer based delivery device for controlled release of pesticide by light holds great interest for field application.

pH-degradable and thermoresponsive water-soluble core cross-linked polymeric nanoparticles as potential drug delivery vehicle for doxorubicin

Controlled and efficient delivery of therapeutics to tumor cells is one of the key issues in cancer therapy. In the present work, a new class of water soluble core cross-linked polymer nanoparticles (CLPNs) possessing acid degradable core and thermoresponsive shell was synthesized for pH-triggered delivery of drugs to cancerous cells. The diol groups of the poly(ethylene glycol)-b-poly(N-isopropylacrylamide)-b-poly(glycidyl methacrylate) diol triblock copolymer were utilized to form the core cross-linked polymeric nanoparticles through an arm-first method by reaction with aldehyde functionalized cross-linkers through formation of acetal linkages. The encapsulation efficiency as well as the release properties of these CLPNs was investigated using doxorubicin (DOX), a known anticancer drug. The release was found to be preferable at the desired lysosomal pH (∼5.0) of the cancer cells and below the LCST (∼32 °C) of poly(N-isopropylacrylamide) (PNIPA). The cytotoxicities of the precursor polymer as well as the CLPNs were tested on the growth of NIH/3T3, normal mouse fibroblast cells, and they were found to be nontoxic. The anticancer activity of the DOX loaded CLPN was confirmed using cervical cancer cell lines HeLa and SiHa by MTT assay, morphological studies and flow cytometry. These studies revealed an increased accumulation of the drug around the nucleus when treated with DOX-loaded CLPN as compared to free DOX along with significant reduction in IC50 of both the cell lines. Thus, these CLPNs are potentially useful for controlled drug delivery in the case of advanced chemotherapeutic applications.

Polymeric nanostructures with pH-labile core for controlled drug release

Efficient and stimuli-triggered controlled delivery of therapeutics is one of the important issues in modern advanced therapy. In the present work, a versatile route for the synthesis of core cross-linked polymeric nanostructures (CLPN) through thiol-acrylate Michael addition reaction via the formation of β-thiopropionate has been described. The acid groups of the poly(acrylic acid) block of poly(ethylene glycol)-b-poly(N-isopropylacrylamide)-b-poly(acrylic acid) triblock copolymer were reacted with 2-hydroxyethyl acrylate (HEA) to yield the corresponding acrylate-functionalized copolymer (P1). Following this, P1 was reacted with a thiol functionalized cross-linker (CL) resulting in the formation of core cross-linked polymeric nanoparticles through acrylate-thiol Michael reaction. The ability of these nanoparticles to encapsulate drug molecules inside their core and their effective release following a pH-triggered controlled degradation of the core were demonstrated. The temperature sensitive release behaviour of the system was also studied. The non-toxic nature of the precursor polymers and the core cross-linked polymeric nanoparticles was also established, that further substantiated their potential as carriers for controlled release of drugs.