Ramavatar Meena

Detection and quantification of some plant growth regulators in a seaweed-based foliar spray employing a mass spectrometric technique sans chromatographic separation.

The sap expelled from the fresh harvest of Kappaphycus alvarezii , a red seaweed growing in tropical waters, has been reported to be a potent foliar spray. Tandem mass spectrometry of various organic extracts of the sap confirmed the presence of the plant growth regulators (PGRs) indole 3-acetic acid, gibberellin GA(3), kinetin, and zeatin. These PGRs were quantified in fresh state and after 1 year of storage by ESI-MS without recourse to chromatographic separation. Quantification was validated against HPLC data. The results may be useful in correlating with the efficacy of the sap. The methodology was extended to two other seaweeds. The method developed is convenient and precise and may find application in other agricultural formulations containing these growth hormones.

Chitosan-Based Aerogel Membrane for Robust Oil-in-Water Emulsion Separation.

Here, we demonstrate direct recovery of water from stable emulsion waste using aerogel membrane. Chitosan-based gel was transformed into highly porous aerogel membrane using bio-origin genipin as cross-linking agent. Aerogel membranes were characterized for their morphology using SEM, chemical composition by FTIR and solid-UV. Further, aerogel was tested for recovery of high quality water from oil spill sample collected from ship breaking yard. High quality (with >99% purity) water was recovered with a flux rate of >600 L·m(-2)·h(-1)·bar(-1). After repeated use, aerogel membranes were tested for greener disposal possibilities by biodegrading membrane in soil.

Bio-based superhydrophilic foam membranes for sustainable oil–water separation

The development of a low-cost, high-performance, biobased membrane technology has been attempted to treat environmentally sensitive wastewater streams. Novel foam membranes (FMs) were derived from agarose (Agr) and gelatin (Gel) in combination with a non-toxic fruit extract and natural crosslinker, genipin (G). FMs were successfully tested for their oil–water separation efficiencies. FMs attained unique capillary microstructures (10–45 μm) as a result of the controlled lyophilization process, which allows selective permeation of water. Stable microporous membranes with nominal pore sizes in between the microfiltration and ultrafiltration range generated as high as >500 L m−2 h−1 continuous flux with ∼98% pure product water. One of the advantages of these FMs is that after oil–water separation, they can undergo an easy membrane cleaning process, thereby retaining surface activity for long term performance.

Profiling of cellulose content in Indian seaweed species.

Cellulose contents were estimated in 12 seaweed samples belonging to different families e.g. red, brown and green, growing in Indian waters. Each cellulose sample was fractionated to yield alpha (alpha) and beta (beta) celluloses. Characterization was done using various analytical tools and results were validated by comparison with those of the cellulose obtained from Whatman filter paper No. 4. The greatest yields of cellulose (crude), alpha- and beta-cellulose were obtained from Gelidiella acerosa (13.65%), Chamaedoris auriculata (9.0%) and G. acerosa (3.10%). G. acerosa was also found to contain relatively high amount of alpha-cellulose (8.19%). The lowest cellulose contents were recorded from Kappaphycus alvarezii (2.00%) and Sarconema scinaioides (2.1%), while the latter contained the lowest alpha-, and beta-celluloses (1.0% and 0.30%, respectively). It appears that agarophytic and alginophytic algae contain high cellulose and alpha-cellulose contents, while the carrageenophyte contains low cellulose. The brown algae, in general contain high cellulose as well as alpha- and beta-celluloses.

Microwave-induced facile synthesis of water-soluble fluorogenic alginic acid derivatives

A facile microwave-induced method was developed for synthesizing water-soluble fluorescent derivatives of alginic acid (ALG) with four different diamines, hydrazine (HY), ethylenediamine (EDA), 1,6-hexanediamine (HDA), and 1,4-cyclohexanediamine (CHDA), followed by a cross-linking reaction with a natural cross linker genipin. The ethylenediamine derivative of alginic acid (ALG-EDA) exhibited good fluorescent activity, which upon cross linking was enhanced threefold. The other amide derivatives, for example, ALG-HY, ALG-HDA, and ALG-CHDA, were not fluorescent, but their respective crosslinked products exhibited excellent fluorescent activity. The fluorescence intensity had an inverse correlation with the number of carbon atoms present in the amine, which in turn was a function of degree of substitution (DS). These fluorescent polysaccharide derivatives are of potential utility in the domain of sensor applications.

Fuel intermediates, agricultural nutrients and pure water from Kappaphycus alvarezii seaweed

The present work reports a standalone integrated scheme for the production of 5-hydroxymethyl furfural (HMF) and potassium sulphate (K2SO4) from granular biomass rich in the sulphated polysaccharide, κ-carrageenan. Fresh Kappaphycus alvarezii seaweed was crushed to expel the juice rich in KCl (0.7 m3 t−1 of fresh seaweed) and granular biomass (0.04 t dry weight per t of fresh seaweed). The latter yielded κ-carrageenan through seawater extraction. HMF was derived from this phycocolloid through reaction with Mg(HSO4)2 acid catalyst and isolated in pure form. Galactose was a co-product which remained in the aqueous phase. The aqueous phase was recycled up to 10 times by maintaining a constant acid strength, and utilized thereafter for the recovery of K2SO4. Selective crystallization of K2SO4 was guided by the phase diagram and use was made of a part of the seaweed juice in this process. The spent aqueous phase rich in galactose was subjected to further reaction with HCl obtainable through bipolar electro-dialysis (ED) of seaweed juice. The reaction yielded levulinic acid (LA) and formic acid (FA) in nearly equal proportions. The processing of 1 t of granular biomass was computed to require 30.15 GJ of energy and would yield 0.18 t HMF, 0.056 t LA, 0.020 t FA, 0.27 t K2SO4, and 5.77 m3 pure water. The process energy requirement for the scheme can be met from additional supplies of granule (3.35 t). Combustion/gasification of this biomass would yield additionally 0.74 t glaserite fertilizer and the required amount of H2SO4 for Mg(HSO4)2 preparation.

A green and sustainable approach to utilize bio-ionic liquids for the selective precipitation of high purity agarose from an agarophyte extract

A few choline based bio-ionic liquids (bio-ILs) were employed for the first time for the selective precipitation of agarose from the hot seaweed extract of Gracilaria dura (an agarophyte) under ambient conditions. The method thus developed is much “greener” and economical in comparison with the methods widely practiced for agarose production. Among the bio-ILs, choline laurate was found to be the most effective for the isolation of agarose with a lower usage level (4.0%, w/w) with the yield of 14.0 ± 0.5% w/w. Agarose obtained by this process had the desired properties required for molecular biological applications and gel electrophoresis. Furthermore the bio-ILs were recycled and reused for subsequent batches of agarose isolation without compromising the yield and quality of biopolymers.

Surfactant-induced coagulation of agarose from aqueous extract of Gracilaria dura seaweed as an energy-efficient alternative to the conventional freeze–thaw process

Surfactant-induced coagulation of agarose from alkali-treated Gracilaria dura seaweed extract (SE) is reported. The new approach, which was suitable for linear galactans with low sulphate content is an alternative to the traditional energy intensive process of “freeze–thaw” cycles employed for product isolation from the extract. Only nonionic surfactants were effective, and detailed studies were undertaken with octyl phenol ethoxylate (Triton X-100). The coagulated product was successively washed with water and water–isopropyl alcohol (IPA) to yield a fine powder of agarose in 13–15% yield (with respect to dry biomass). The product exhibited excellent properties [sulphate content: 0.2% w/w; degree of electro-endosmosis: 0.13; gel strength: 2200 g cm−2 (1% gel, w/v); and gelling temperature: 35 ± 1 °C] essential for demanding molecular biology applications, and the desired gel electrophoretic separation of DNA and RNA was demonstrated. It was further confirmed that there was no degradation of nucleic acids in the gel. The agarose-depleted extract, along with water used for washings, was subjected to reverse osmosis for recovering the surfactant in concentrated form for its subsequent reuse. Energy savings from the improved process were assessed.

The cellulose contents of Indian seaweeds

Cellulose content as well as alpha (α) and beta (β) celluloses were evaluated in 21 seaweed species belonging to different classes growing in Indian waters. The greatest yields of cellulose (crude) and β-cellulose were obtained from Caulerpa taxifolia (approx. 11.0% and 5.2%, respectively), whilst α-cellulose (approx. 8.2%) was the greatest in Padina tetrastromatica. The lowest cellulose (crude), α- and β- contents were recorded from the calcareous red alga Liagora ceranoides (approx. 0.85%, 0.62% and 0.18%, respectively). There was no variation in the yields of cellulose in the brown algae, whilst wide variations in the yields were found in the green and red algae.

Synthesis of bio-based aldehyde from seaweed polysaccharide and its interaction with bovine serum albumin.

Here, we demonstrate a successful synthesis of bio-based aldehyde namely dialdehyde-carboxymethylagarose (DCMA) using carboxymethyagarose (CMA). Further reaction parameters (i.e. reaction temperature, pH and periodate concentration) were optimized to achieve maximum aldehyde content and product yield. The synthesis of DCMA was confirmed by employing FTIR, (1)H NMR, XRD, SEM, AFM, TGA, DSC, EA and GPC techniques. To investigate the aldehyde functionality, DCMA was allowed to interact with BSA and obtained results were found to be comparable with that of synthetic aldehyde (Formaldehyde). Further interaction of DCMA with BSA was confirmed by using UV-vis, FTIR, fluorescent spectroscopy, CD and DLS analysis. Results of this study revealed that bio-based aldehyde behaves like formaldehyde. This study adds value to abundant marine biopolymers and opens the new research area for polymer researchers.