Randy J. Boudrieau

Tibial Plateau Leveling Osteotomy or Tibial Tuberosity Advancement

OBJECTIVE To review the proposed biomechanical basis of the tibial plateau leveling osteotomy (TPLO) and tibial tuberosity advancement (TTA) and recommendations for these techniques. STUDY DESIGN Literature review. METHODS Literature search through Ovid Medline Plus, Pub Med, CAB Abstracts, and conference proceedings abstracts (August 1983 to March 2008). RESULTS TPLO and TTA stabilize the cranial cruciate ligament (CrCL) deficient stifle joint neutralizing tibiofemoral shear forces by altering the geometry of the proximal aspect of the tibia. Stability is attained by placing the joint in a functionally greater flexion angle so that the patellar tendon angle (PTA) remains < or =90 degrees. Both procedures target slightly differing endpoints, the significance of which is unknown. Many of the biomechanical variables investigated appear to favor the TTA; however, TPLO appears to have more clinical versatility. The clinical ramifications of these differences remain to be determined but the reported results for both procedures are comparable. Only the early results of these techniques have been reported, which is reflected in the relatively high number of complications associated with the early learning curve for both procedures. CONCLUSIONS There are many similarities between TPLO and TTA although it remains to be fully elucidated if either procedure is superior and under what conditions. CLINICAL RELEVANCE TPLO and TTA are effective at returning dogs with a CrCL-deficient stifle joint to good limb function. Surgeon discretion and case selection drive selection of TPLO or TTA based mostly on anecdotal evidence and personal experience.

Single cycle to failure in bending of three standard and five locking plates and plate constructs

OBJECTIVE To evaluate the biomechanical properties of standard and locking plates in bending. We hypothesised that titanium (Ti) constructs would have the greatest deformation and that String of Pearl (SOP) constructs would have the greatest strength and stiffness, and would behave differently compared to plates alone. METHODS Dynamic compression plates (DCP), stainless steel (SS) limited contact (LC)-DCP®, Ti LC-DCP, locking compression plates (LCP), 10 mm and 11 mm advanced locking plate system (ALPS 10 / 11), SOP and Fixin plates were evaluated individually and as constructs applied to a validated bone model simulating a bridging osteosynthesis. Bending stiffness and strength were compared using one-way ANOVA with post hoc Tukey, and unpaired t-test (p <0.05). RESULTS The SOP plates had significantly greater stiffness than all other plates; Ti LC-DCP, ALPS 10 and Fixin plates had significantly lower stiffness than all other plates. The SOP constructs had the highest mean bending stiffness, and strength that was significantly different from only the Ti LC-DCP, ALPS 10 and Fixin constructs. The ALPS 10 constructs had the lowest mean bending stiffness, and strength that was significantly different from only ALPS 11 and SOP constructs. Comparison of bending structural stiffness of plates versus constructs showed a significant difference in all plate pairs except for the DCP and ALPS 10. CLINICAL RELEVANCE Due to differing plate construct properties inherent to these diverse implant systems, identical approaches to fracture management and plate application cannot be applied.

Evaluation of joint stabilization for treatment of shearing injuries of the tarsus in 20 dogs.

Medical records of 20 dogs with 23 shearing injuries of the tarsus leading to joint instability were reviewed. A transarticular external skeletal fixation device or prosthetic ligament was used to stabilize the joints. The most common complications were fixator failure and implant infection. The median times for wound healing and maximal joint function were 10 and 12 weeks, respectively. Clinical outcome was excellent in 22%, good in 56%, and poor in 22%. Comparison of the two stabilization methods showed no statistically significant differences in healing time, time to regain function, or clinical outcome.

Ex vivo biomechanical evaluation of the canine cranial cruciate ligament-deficient stifle with varying angles of stifle joint flexion and axial loads after tibial tuberosity advancement.

OBJECTIVE To evaluate the effect of tibial tuberosity advancement (TTA) on cranial tibial thrust (CrTT), retropatellar force (RPF), patellar tendon load (PTL), and patellar tendon angle determined by the tibial plateau angle (PTA(TPA) ) method or common tangent (PTA(CT) ) method in the canine cranial cruciate ligament (CrCL)-deficient stifle joint. STUDY DESIGN Ex vivo cadaver study. SAMPLE POPULATION Cadaveric canine hind limbs (n=30). METHODS Stifle joints were subjected to 3 differing loading conditions using a constrained limb press model (Group 1: 30% body weight axial load at stifle and talocrural joint angles of 135 ± 5° and 145 ± 5°, respectively; Group 2: 30% body weight axial load at stifle and talocrural angles of 145 ± 5° and 135 ± 5°, respectively; and Group 3: 50% body weight axial load at stifle and talocrural joint angles of 135 ± 5° and 145 ± 5°, respectively). The CrCL was transected in situ under load; sensors allowed direct measurement of CrTT, RPF, and PTL. Lateral radiographic projections were used to assess PTA(TPA) and PTA(CT) . Descriptive statistics were used to report CrTT (by design this force returned to 0-point values, defined as the neutral point of advancement [NPA]). At the NPA, RPF was compared with baseline using a 2-tailed sign test. PTL within groups were compared using a paired t-test; pair-wise comparisons of PTA(TPA) and PTA(CT) were performed using a paired t-test. Comparisons between loading conditions were made with a 1-way ANOVA and Tukeys post hoc test. Equivalence tests were used to test mean PTA(TPA) and PTA(CT) for equivalence to 90°. Significance was set at a P-value of .05. RESULTS CrTT returned to baseline values, and RPF and PTL at NPA were reduced below baseline values in all specimens in a near linear fashion with TTA. At the NPA, PTA(TPA) >PTA(CT) in 2 of the 3 loading conditions, but insufficient evidence to suggest they differed in the third. Mean PTA(TPA) and PTA(CT) varied between loading conditions. The threshold for each of the groups evaluated, at which the PTA could be significantly different from 90°, was larger for PTA(TPA) than PTA(CT) in all groups, as greater variation was observed with PTA(TPA) versus PTA(CT) . CONCLUSION This study further supports the claim that reduction of CrTT occurs after TTA in the CrCL-deficient stifle joint through an alteration of PTA. Additionally, RPF and PTL also decrease after TTA. The PTA(CT) may be a more precise method of determining PTA.

Single cycle to failure in torsion of three standard and five locking plate constructs

OBJECTIVES The biomechanical properties of standard plates and recently designed locking plates were compared in torsion. We hypothesized that titanium (Ti) constructs would have the greatest deformation, and String of Pearls (SOP) constructs the greatest strength and stiffness. METHODS Dynamic compression plates (DCP), stainless steel (SS) limited contact (LC)-DCP, Ti LC-DCP, locking compression plate (LCP), 10 mm and 11 mm Advanced Locking Plate System (ALPS) 10 and 11, SOP and Fixin plates were applied to a validated bone model simulating a bridging osteosynthesis. Yield torque (strength), yield angle (deformation) and stiffness were compared using one-way ANOVA with post hoc Tukey (p <0.05). RESULTS The ALPS 11 constructs had significantly greater elastic deformation than all constructs except for the ALPS 10. There were not any differences in strength observed except for the ALPS 10 constructs, which was less than that for the SOP, LCP, DCP and ALPS 11 constructs. No differences in construct torsional stiffness were observed with the SS LC-DCP, DCP, LCP and SOP constructs; however all had greater stiffness than all remaining constructs. The ALPS 10 construct had lower stiffness than all constructs. CLINICAL SIGNIFICANCE Modulus of elasticity of Ti explains the higher deformation and lower stiffness of these systems, with similar results for the Fixin due to its lower section modulus compared to all other plates. The SOP and standard constructs had surprisingly similar biomechanical properties in torsion. The rationale for selecting these implants for fracture repair likely needs to be based upon their differing biomechanical properties inherent to the diverse implant systems.

Severe carpal and tarsal shearing injuries treated with an immediate arthrodesis in seven dogs.

The medical records of seven dogs with severe, grade 3, open shearing wounds of the carpus or tarsus that were treated with an immediate arthrodesis were reviewed. Six dogs were managed with a transarticular external skeletal fixator (ESF), and one dog was treated with plate fixation. The soft tissues were managed simultaneously along with the definitive joint stabilization in all cases. Minor complications occurred in four dogs: one dog that required a skin graft, one dog in which a skin graft was recommended but not performed, one dog in which a secondary skin closure was performed, and one dog in which a delayed cancellous bone graft was placed. Major complications occurred in three dogs: two dogs that required restabilization of the arthrodesis and one dog that required implant (i.e., plate) removal due to infection. All dogs healed with acceptable functional and cosmetic results. Further long-term evaluation of five dogs revealed that all but one dog had either excellent or good functional outcomes, and the remaining dog had a fair outcome. Similarly, five dogs had either excellent or good cosmetic outcomes, with the remaining dog having a fair outcome. All owners were very satisfied with the overall results. This clinical study demonstrated that an immediate, definitive management technique, in which bone fusion and wound management are undertaken as simultaneous objectives, is a viable technique of managing severe periarticular shearing injuries. Transarticular stabilization with an ESF is the technique recommended.

Mandibular reconstruction after gunshot trauma in a dog by use of recombinant human bone morphogenetic protein-2

CASE DESCRIPTION A 6-year-old German Shorthaired Pointer was evaluated for possible reconstruction of a mandibular defect resulting from gunshot trauma. CLINICAL FINDINGS A 5-cm defect of the right mandibular body was evident. A segment of the mandibular body was removed 9 weeks earlier because of severe contamination and comminution associated with gunshot trauma. Subsequent right-sided mandibular drift resulted in malocclusion in which the left mandibular canine tooth caused trauma to mucosa of the hard palate medial to the left maxillary canine tooth. The right maxillary canine tooth caused trauma to gingiva lingual to the right mandibular canine tooth. TREATMENT AND OUTCOME The right mandible was stabilized with a 2.0-mm maxillofacial miniplate positioned along the lateral alveolar margin and a 2.4-mm locking mandibular reconstruction plate placed along the ventrolateral mandible. An absorbable compression-resistant matrix containing collagen, hydroxyapatite, and tricalcium phosphate was soaked in recombinant human bone morphogenetic protein-2 (rhBMP-2; 7.2 mL of a 0.5 mg/mL solution for a dose of 3.6 mg) and placed in the defect. By 4 weeks after surgery, an exuberant callus was evident at the site of the defect. By 7 months after surgery, the callus had remodeled, resulting in normal appearance, normal occlusion, and excellent function of the jaw. CLINICAL RELEVANCE Mandibular defects resulting from gunshot trauma can be treated by removal of contaminated tissue and comminuted bone fragments, followed by staged reconstruction. The combination of rhBMP-2 and compression-resistant matrix was effective in a staged mandibular reconstruction in a dog with a severe traumatic mandibular defect.

Radiographic outcome and complications of tibial plateau leveling osteotomy stabilized with an anatomically contoured locking bone plate

OBJECTIVE To evaluate the short-term clinical performance of an anatomically pre-contoured, locking plate in dogs undergoing tibial plateau leveling osteotomy (TPLO) for cranial cruciate ligament (CrCL) disease. STUDY DESIGN Prospective, multi-center clinical study. ANIMALS Dogs (n = 56) undergoing TPLO. METHODS Signalment and operative data were recorded. Preoperative, postoperative, and follow-up tibial plateau angle (TPA) were measured from radiographic images. Intraoperative and postoperative complications were recorded; the latter were categorized as minor if additional surgery was not necessary, and major if surgery was needed to resolve the complication. Bone healing was scored and change in tibial plateau angle (TPACH ) between postoperative and follow up radiographic images was calculated. RESULTS Mean (± SD) preoperative TPA was 28.6 ± 3.8°, and mean postoperative TPA was 4.8 ± 1.9°. Four intraoperative complications (7.1%) including 2 cases of intra-articular screw placement, 3 minor postoperative complications (5.4%), and no major or catastrophic postoperative complications occurred. Median bone healing grade was 4/4 (excellent union >75% healing). Mean TPACH was 0.15 ± 1.32°. CONCLUSIONS Use of this anatomically contoured, locking TPLO plate by experienced surgeons is associated with accurate tibial plateau leveling, reliably excellent bone union at follow-up exam, minimal TPACH , and a lower complication rate than previously reported. Confining contouring to the distal shaft of the plate ensures there is precise apposition to the tibial diaphysis and mitigates the risk of intra-articular screw placement.

Correction of Malocclusion Secondary to Maxillary Impaction Fractures Using a Mandibular Symphyseal Realignment in Eight Cats

Eight cats with stable impaction fractures of the maxilla, sufficient to cause malocclusion, were treated by mandibular symphyseal realignment. The mandibular symphyseal realignment allowed occlusion to be restored with a minimal amount of dental work (e.g., enameloplasty, endodontics, or tooth extraction) in a majority of the cases. Enameloplasties were performed in two cats, one of which had a vital pulpotomy. Tooth extractions (range, two to five teeth; mean, 3.3 teeth) were performed in four cats. All cats were doing well at the time of in-hospital follow-up at one month to four years (mean, 2.1 yrs) postoperatively. Further telephone follow-up was obtained, from 1.5 to five years (mean, 3.4 yrs) after surgery, from all but one owner, with no change from the in-hospital evaluations. All owners contacted were pleased with the long-term outcome.

Ex Vivo Biomechanical Comparison of the 2.4 mm UniLOCK® Reconstruction Plate Using 2.4 mm Locking Versus Standard Screws for Fixation of Acetabular Osteotomy in Dogs

OBJECTIVE To compare the accuracy of reduction and the biomechanical characteristics of canine acetabular osteotomies stabilized with locking versus standard screws in a locking plate. STUDY DESIGN Ex vivo biomechanical study. SAMPLE POPULATION Cadaveric canine hemipelves and corresponding femurs (n=10 paired). METHODS Transverse acetabular osteotomies stabilized with 5-hole 2.4 mm uniLOCK reconstruction plates using either 2.4 mm locking monocortical or standard bicortical screw fixation (Synthes Maxillofacial). Fracture reduction was assessed directly (craniocaudal acetabular width measurements and gross observation) and indirectly (impression casts). All constructs were fatigue-tested, followed by acute destructive testing. All outcome measures (mean+/-SD) were evaluated for significance (P<.05) using paired t-tests. RESULTS Craniocaudal acetabular diameters before and after fixation were not significantly different (21.9+/-1.2 and 21.5+/-1.2 mm; P=.45). No significant differences were observed in acetabular width differences between pre- and postoperative fixation between groups (locking -0.4+/-0.4 mm; standard -0.4+/-0.3 mm; P=.76). Grossly, there was no significant difference in the repairs and impression casts did not reveal a significant (P=.75) difference in congruency between the groups. No significant differences were found in fracture gap between groups either dorsally (locking 0.38+/-0.23 mm versus standard 0.22+/-0.05 mm; P=.30) or ventrally (locking 0.80+/-0.79 mm versus standard 0.35+/-0.13 mm; P=.23), and maximum change in amplitude dorsally (locking 0.96+/-2.15 mm versus standard 0.92+/-0.89 mm; P=.96) or ventrally (locking 2.02+/-2.93 mm versus standard 0.15+/-0.81 mm; P=.25). There were no significant differences in stiffness (locking 241+/-46 N/mm versus standard 283+/-209 N/mm; P=.64) or load to failure (locking 1077+/-950 N versus standard 811+/-248 N; P=.49). CONCLUSION No significant differences were found between pelves stabilized with locking monocortical screw fixation or standard bicortical screw fixation with respect to joint congruity, displacement of fracture gap after cyclic loading, construct stiffness, or ultimate load to failure. CLINICAL RELEVANCE There is no apparent advantage of locking plate fixation over standard plate fixation of 2-piece ex vivo acetabular fractures using the 2.4 mm uniLOCK reconstruction plate.