Ranjana Rai

Polyhydroxyalkanoate biosynthesis in Bacillus cereus SPV under varied limiting conditions and an insight into the biosynthetic genes involved

Aims:  A new strain of Bacillus, Bacillus cereus SPV, was found to be capable of using a wide range of carbon sources for the production of polyhydroxyalkanoates (PHAs) ( Valappil et al. 2007b ). Limiting nutrient in the culture conditions is crucial for PHA production. In this study, B. cereus SPV was grown in different culture conditions with limitation of potassium, nitrogen, sulphur and phosphorous to establish the impact of nutritional limitation on PHA production.

Strategies for the chemical and biological functionalization of scaffolds for cardiac tissue engineering: a review

The development of biomaterials for cardiac tissue engineering (CTE) is challenging, primarily owing to the requirement of achieving a surface with favourable characteristics that enhances cell attachment and maturation. The biomaterial surface plays a crucial role as it forms the interface between the scaffold (or cardiac patch) and the cells. In the field of CTE, synthetic polymers (polyglycerol sebacate, polyethylene glycol, polyglycolic acid, poly-l-lactide, polyvinyl alcohol, polycaprolactone, polyurethanes and poly(N-isopropylacrylamide)) have been proven to exhibit suitable biodegradable and mechanical properties. Despite the fact that they show the required biocompatible behaviour, most synthetic polymers exhibit poor cell attachment capability. These synthetic polymers are mostly hydrophobic and lack cell recognition sites, limiting their application. Therefore, biofunctionalization of these biomaterials to enhance cell attachment and cell material interaction is being widely investigated. There are numerous approaches for functionalizing a material, which can be classified as mechanical, physical, chemical and biological. In this review, recent studies reported in the literature to functionalize scaffolds in the context of CTE, are discussed. Surface, morphological, chemical and biological modifications are introduced and the results of novel promising strategies and techniques are discussed.

Development and characterization of novel electrically conductive PANI-PGS composites for cardiac tissue engineering applications.

Cardiovascular diseases, especially myocardial infarction, are the leading cause of morbidity and mortality in the world, also resulting in huge economic burdens on national economies. A cardiac patch strategy aims at regenerating an infarcted heart by providing healthy functional cells to the injured region via a carrier substrate, and providing mechanical support, thereby preventing deleterious ventricular remodeling. In the present work, polyaniline (PANI) was doped with camphorsulfonic acid and blended with poly(glycerol-sebacate) at ratios of 10, 20 and 30vol.% PANI content to produce electrically conductive composite cardiac patches via the solvent casting method. The composites were characterized in terms of their electrical, mechanical and physicochemical properties. The in vitro biodegradability of the composites was also evaluated. Electrical conductivity increased from 0Scm(-1) for pure PGS to 0.018Scm(-1) for 30vol.% PANI-PGS samples. Moreover, the conductivities were preserved for at least 100h post fabrication. Tensile tests revealed an improvement in the elastic modulus, tensile strength and elasticity with increasing PANI content. The degradation products caused a local drop in pH, which was higher in all composite samples compared with pure PGS, hinting at a buffering effect due to the presence of PANI. Finally, the cytocompatibility of the composites was confirmed when C2C12 cells attached and proliferated on samples with varying PANI content. Furthermore, leaching of acid dopants from the developed composites did not have any deleterious effect on the viability of C2C12 cells. Taken together, these results confirm the potential of PANI-PGS composites for use as substrates to modulate cellular behavior via electrical stimulation, and as biocompatible scaffolds for cardiac tissue engineering applications.

Poly-3-hydroxyoctanoate P(3HO), a medium chain length polyhydroxyalkanoate homopolymer from Pseudomonas mendocina

Pseudomonas mendocina was found to produce a unique homopolymer of poly(3-hydroxyoctanoate), P(3HO), rather than a copolymer, when grown on sodium octanoate as the sole carbon source. Although this polymer has been produced by other organisms, interestingly this is the first time an absolute homopolymer has been produced by a wild type organism. In addition, a detailed study on the effects of different extraction methods on the yield, molecular weight, thermal properties, and lipopolysaccharide content of P(3HO) has been carried out. The organism was able to accumulate P(3HO) up to 31.38% of its dry cell weight within 48 h in mineral salt medium. Characterization of the monomer was carried out using FTIR, GC-MS, (13)C, (1)H, and HSQC NMR spectroscopy. The polymer had a crystallinity of 37.5%, Youngs modulus value of 11.6 MPa and contact angle of 77.3°. Microstructural studies of solvent cast polymer films revealed a smooth surface topography with a root-mean-square roughness value of 0.238 μm.

Biomimetic poly(glycerol sebacate) (PGS) membranes for cardiac patch application.

In this study biomimetic poly(glycerol sebacate) PGS matrix was developed for cardiac patch application. The rationale was that such matrices would provide conducive environment for the seeded cells at the interphase with PGS. From the microstructural standpoint, PGS was fabricated into dense films and porous PGS scaffolds. From the biological aspect, biomimetic PGS membranes were developed via covalently binding peptides Tyr-Ile-Gly-Ser-Arg (YIGSR) and Gly-Arg-Gly-Asp-Ser-Pro (GRGDSP), corresponding to the epitope sequences of laminin and fibronectin, respectively onto the surface. To improve and enhance homogenous binding of peptides onto the PGS surface, chemical modification of its surface was carried out. A sequential regime of alkaline hydrolysis with 0.01 M NaOH for 5 min and acidification with 0.01 M HCl for 25s was optimal. More COOH chemical group was exposed without causing deleterious effect on the bulk properties of the polymer as revealed by the physicochemical analysis carried out. HPLC analysis, chemical imaging and ToF-SIMS were able to establish the successful homogenous functionalization of PGS membranes with the peptides. Finally, the developed biomimetic membranes supported the adhesion and growth of rat and human cardiac progenitor cells.

Preparation and characterization of PHBV microsphere/45S5 bioactive glass composite scaffolds with vancomycin releasing function

PHBV microsphere/45S5 bioactive glass (BG) composite scaffolds with drug release function were developed for bone tissue engineering. BG-based glass-ceramic scaffolds with high porosity (94%) and interconnected pore structure prepared by foam replication method were coated with PHBV microspheres (nominal diameter=3.5 μm) produced by water-in-oil-in-water double emulsion solvent evaporation method. A homogeneous microsphere coating throughout the porous structure of scaffolds was obtained by a simple dip coating method, using the slurry of PHBV microspheres in hexane. Compressive strength tests showed that the microsphere coating slightly improved the mechanical properties of the scaffolds. It was confirmed that the microsphere coating did not inhibit the bioactivity of the scaffolds in SBF. Hydroxyapatite crystals homogeneously grew not only on the struts of the scaffolds but also on the surface of microspheres within 7 days of immersion in SBF. Vancomycin was successfully encapsulated into the PHBV microspheres. The encapsulated vancomycin was released with a dual release profile involving a relatively low initial burst release (21%) and a sustained release (1 month), which is favorable compared to the high initial burst release (77%) and short release period (4 days) measured on uncoated scaffolds. The developed bioactive composite scaffold with drug delivery function has thus the potential to be used advantageously in bone tissue engineering.

Bioactive Electrospun Fibers of Poly(glycerol sebacate) and Poly(ε‐caprolactone) for Cardiac Patch Application

Scaffolds for cardiac patch application must meet stringent requirements such as biocompatibility, biodegradability, and facilitate vascularization in the engineered tissue. Here, a bioactive, biocompatible, and biodegradable electrospun scaffold of poly(glycerol sebacate)-poly(ε-caprolactone) (PGS-PCL) is proposed as a potential scaffold for cardiac patch application. The fibers are smooth bead free with average diameter = 0.8 ± 0.3 μm, mean pore size = 2.2 ± 1.2 μm, porosity = 62 ± 4%, and permeability higher than that of control biological tissue. For the first time, bioactive PGS-PCL fibers functionalized with vascular endothelial growth factor (VEGF) are developed, the approach used being chemical modification of the PGS-PCL fibers followed by subsequent binding of VEGF via amide bonding. The approach results in uniform immobilization of VEGF on the fibers; the concentrations are 1.0 μg cm(-2) for the PGS-PCL (H) and 0.60 μg cm(-2) for the PGS-PCL (L) samples. The bioactive scaffold supports the attachment and growth of seeded myogenic and vasculogenic cell lines. In fact, rat aortic endothelial cells also display angiogenic features indicating potential for the formation of vascular tree in the scaffold. These results therefore demonstrate the prospects of VEGF-functionalized PGS-PCL fibrous scaffold as promising matrix for cardiac patch application.

Fabrication of a novel poly(3-hydroxyoctanoate) / nanoscale bioactive glass composite film with potential as a multifunctional wound dressing

Fabrication of a composite scaffold of nanobioglass (n‐BG) 45S5 and poly(3‐hydroxyocatnoate), P(3HO) was studied for the first time with the aim of developing a novel, multifunctional wound dressing. The incorporation of n‐BG accelerated blood clotting time and its incorporation in the polymer matrix enhanced the wettability, surface roughness and bio‐compatibility of the scaffold.

Imaging internal features of whole, unfixed bacteria

Wet scanning-transmission electron microscopy (STEM) is a technique that allows high-resolution transmission imaging of biological samples in a hydrated state, with minimal sample preparation. However, it has barely been used for the study of bacterial cells. In this study, we present an analysis of the advantages and disadvantages of wet STEM compared with standard transmission electron microscopy (TEM). To investigate the potential applications of wet STEM, we studied the growth of polyhydroxyalkanoate and triacylglycerol carbon storage inclusions. These were easily visible inside cells, even in the early stages of accumulation. Although TEM produces higher resolution images, wet STEM is useful when preservation of the sample is important or when studying the relative sizes of different features, since samples do not need to be sectioned. Furthermore, under carefully selected conditions, it may be possible to maintain cell viability, enabling new types of experiments to be carried out. To our knowledge, internal features of bacterial cells have not been imaged previously by this technique.

Novel PGS/PCL electrospun fiber mats with patterned topographical features for cardiac patch applications.

Nano- and micro-scale topographical features play a critical role in the induction and maintenance of various cellular properties and functions, including morphology, adhesion, gene regulation, and cell-to-cell communication. In addition, recent studies have indicated that the structure and function of heart tissue are also sensitive to mechanical cues at the nano- and micro-scale. Although fabrication methods exist for generating topographical features on polymeric scaffolds for cell culture, current techniques, especially those with nano-scale resolution, are typically complex, prohibitively expensive and not accessible to most biology laboratories. Here, we present a simple and tunable fabrication method for the production of patterned electrospun fibers that simulate the complex anisotropic and multi-scale architecture of cardiac tissue, to promote cardiac cell alignment. This method is based on the combination of electrospinning and soft lithography techniques, in which electrospun fibers, based on a blend of poly(glycerol sebacate) and poly(caprolactone), were collected on a patterned Teflon-coated silicon wafer with imprinted topographical features. Different surface topographies were investigated, such as squares and grooves, with constant or different interspatial distances. In vitro cell culture studies successfully demonstrated the alignment of both C2C12 myoblasts and neonatal rat cardiomyocytes on fabricated electrospun patterned surfaces. C2C12 cells were cultured over a period of 72h to study the effect of topographical cues on cell morphology. Cells attached within the first 8h after seeding and after 24h most of the cells started to align responding to the topographical cues. Similarly, cardiomyocytes responded to the topographical features by aligning themselves and by expressing Connexin 43 along cellular junctions. Summarizing, we have developed a new method with the potential to significantly promote cardiac tissue engineering by fabricating electrospun fibers with defined topographical features to guide and instruct donor and/or host cells.