Rao Y. Surampalli

The inhibitory effects of silver nanoparticles, silver ions, and silver chloride colloids on microbial growth.

Emerging nanomaterials are of great concern to wastewater treatment utilities and the environment. The inhibitory effects of silver nanoparticles (Ag NPs) and other important Ag species on microbial growth were evaluated using extant respirometry and an automatic microtiter fluorescence assay. Using autotrophic nitrifying organisms from a well-controlled continuously operated bioreactor, Ag NPs (average size=14+/-6 nm), Ag(+) ions (AgNO(3)), and AgCl colloids (average size=0.25 microm), all at 1mg/L Ag, inhibited respiration by 86+/-3%, 42+/-7%, and 46+/-4%, respectively. Based on a prolonged microtiter assay, at about 0.5mg/L Ag, the inhibitions on the growth of Escherichia coli PHL628-gfp by Ag NPs, Ag(+) ions, and AgCl colloids were 55+/-8%, 100%, and 66+/-6%, respectively. Cell membrane integrity was not compromised under the treatment of test Ag species by using a LIVE/DEAD Baclight bacterial viability assay. However, electron micrographs demonstrated that Ag NPs attached to the microbial cells, probably causing cell wall pitting. The results suggest that nitrifying bacteria are especially susceptible to inhibition by Ag NPs, and the accumulation of Ag NPs could have detrimental effects on the microorganisms in wastewater treatment.

Engineered nanoparticles in wastewater and wastewater sludge--evidence and impacts.

Nanotechnology has widespread application in agricultural, environmental and industrial sectors ranging from fabrication of molecular assemblies to microbial array chips. Despite the booming application of nanotechnology, there have been serious implications which are coming into light in the recent years within different environmental compartments, namely air, water and soil and its likely impact on the human health. Health and environmental effects of common metals and materials are well-known, however, when the metals and materials take the form of nanoparticles--consequential hazards based on shape and size are yet to be explored. The nanoparticles released from different nanomaterials used in our household and industrial commodities find their way through waste disposal routes into the wastewater treatment facilities and end up in wastewater sludge. Further escape of these nanoparticles into the effluent will contaminate the aquatic and soil environment. Hence, an understanding of the presence, behavior and impact of these nanoparticles in wastewater and wastewater sludge is necessary and timely. Despite the lack of sufficient literature, the present review attempts to link various compartmentalization aspects of the nanoparticles, their physical properties and toxicity in wastewater and wastewater sludge through simile drawn from other environmental streams.

Ultrasonic pretreatment of sludge: A review

Ultrasonication is an emerging and very effective mechanical pretreatment method to enhance the biodegradability of the sludge, and it would be very useful to all wastewater treatment plants in treating and disposing sewage sludge. Ultrasonication enhances the sludge digestibility by disrupting the physical, chemical and biological properties of the sludge. The degree of disintegration depends on the sonication parameters and also on sludge characteristics, therefore the evaluation of the optimum parameters varies with the type of sonicater and sludge to be treated. The full-scale installations of ultrasonication have demonstrated that there is 50% increase in the biogas generation, and in addition evaluation of energy balance showed that the average ratio of the net energy gain to electric consumed by the ultrasound device is 2.5. This review article summarizes the benefits of ultrasonication of sludge, the effect of sonication parameters, impact of sludge characteristics on sludge disintegration, and thereby the increase in biogas production in anaerobic digester. Due to uncertainty in the unit representation by many researchers and nonavailability of the data, comparison of these results is complicated. Comparison of ultrasonication with other pretreatment options is necessary to evaluate the best economical and environmental pretreatment technology for sludge treatment and disposal. The optimum parameters for the ultrasonication vary with sludge characteristics.

ROLE OF SULFIDE AND LIGAND STRENGTH IN CONTROLLING NANOSILVER TOXICITY

Nanosilver has been used broadly in nanotechnology enhanced consumer products because of its strong antimicrobial properties. Silver nanoparticles (AgNPs) released from these products will likely enter wastewater collection and treatment systems. This research evaluated the role of sulfide and ligand strength in controlling nanosilver toxicity to nitrifying bacteria that are important in wastewater treatment. The nanosilver toxicity in the absence and presence of ligands (SO(4)(2-), S(2-), Cl(-), PO(4)(3-), and EDTA(-)) commonly present in wastewater was determined from the oxygen uptake rate measurements. Sulfide appeared to be the only ligand to effectively reduce nanosilver toxicity. By adding a small aliquot of sulfide that was stoichiometrically complexed with AgNPs, the nanosilver toxicity to nitrifying organisms was reduced by up to 80%. Scanning electron microscopy coupled with energy dispersive X-ray analysis indicated that AgNPs were highly reactive with sulfide to form new Ag(x)S(y) complexes or precipitates. These complexes were not oxidized after a prolonged period of aeration (18h). This information is useful for wastewater treatment design and operation to reduce nanosilver toxicity via sulfide complexation. While the biotic ligand model was successful in predicting the toxicity of Ag(+) ions, it could not accurately predict the toxicity of AgNPs. Nevertheless, it could be one of the many tools useful in predicting and controlling nanosilver toxicity to wastewater microorganisms.

Extracellular polymeric substances of bacteria and their potential environmental applications

Biopolymers are considered a potential alternative to conventional chemical polymers because of their ease of biodegradability, high efficiency, non-toxicity and non-secondary pollution. Recently, extracellular polymeric substances (EPS, biopolymers produced by the microorganisms) have been recognised by many researchers as a potential flocculent for their applications in various water, wastewater and sludge treatment processes. In this context, literature information on EPS is widely dispersed and is very scarce. Thus, this review marginalizes various studies conducted so far about EPS nature-production-recovery, properties, environmental applications and moreover, critically examines future research needs and advanced application prospective of the EPS. One of the most important aspect of chemical composition and structural details of different moieties of EPS in terms of carbohydrates, proteins, extracellular DNA, lipid and surfactants and humic substances are described. These chemical characteristics of EPS in relation to formation and properties of microbial aggregates as well as degradation of EPS in the matrix (biomass, flocs etc) are analyzed. The important engineering properties (based on structural characteristics) such as adsorption, biodegradability, hydrophilicity/hydrophobicity of EPS matrix are also discussed in details. Different aspects of EPS production process such as bacterial strain maintenance; inoculum and factors affecting EPS production were presented. The important factors affecting EPS production include growth phase, carbon and nitrogen sources and their ratio, role of other nutrients (phosphorus, micronutrients/trace elements, and vitamins), impact of pH, temperature, metals, aerobic versus anaerobic conditions and pure and mixed culture. The production of EPS in high concentration with high productivity is essential due to economic reasons. Therefore, the knowledge about all the aspects of EPS production (listed above) is highly essential to formulate a logical and scientific basis for the research and industrial activities. One of the very important issues in the production/application/biodegradation of EPS is how the EPS is extracted from the matrix or a culture broth. Moreover, EPS matrix available in different forms (crude, loosely bound, tightly bound, slime, capsular and purified) can be used as a bioflocculant material. Several chemical and physical methods for the extraction of EPS (crude form or purified form) from different sources have been analyzed and reported. There is ample information available in the literature about various EPS extraction methods. Flocculability, dewaterability and biosorption ability are the very attractive engineering properties of the EPS matrix. Recent information on important aspects of these properties qualitatively as well as quantitatively has been described. Recent information on the mechanism of flocculation mediated by EPS is presented. Potential role of EPS in sludge dewatering and biosorption phenomenon has been discussed in details. Different factors influencing the EPS ability to flocculate and dewaterability of different suspensions have been included. The factors considered for the discussion are cations, different forms of EPS, concentration of EPS, protein and carbohydrate content of EPS, molecular weight of EPS, pH of the suspension, temperature etc. These factors were selected for the study based upon their role in the flocculation and dewatering mechanism as well the most recent available literature findings on these factors. For example, only recently it has been demonstrated that there is an optimum EPS concentration for sludge flocculation/dewatering. High or low concentration of EPS can lead to destabilization of flocs. Role of EPS in environmental applications such as water treatment, wastewater flocculation and settling, colour removal from wastewater, sludge dewatering, metal removal and recovery, removal of toxic organic compounds, landfill leachate treatment, soil remediation and reclamation has been presented based on the most recent available information. However, data available on environmental application of EPS are very limited. Investigations are required for exploring the potential of field applications of EPS. Finally, the limitations in the knowledge gap are outlined and the research needs as well as future perspectives are highlighted.

Extracellular polymeric substances (EPS) producing bacterial strains of municipal wastewater sludge: Isolation, molecular identification, EPS characterization and performance for sludge settling and dewatering

Wastewater treatment plants often face the problems of sludge settling mainly due to sludge bulking. Generally, synthetic organic polymer and/or inorganic coagulants (ferric chloride, alum and quick lime) are used for sludge settling. These chemicals are very expensive and further pollute the environment. Whereas, the bioflocculants are environment friendly and may be used to flocculate the sludge. Extracellular polymeric substances (EPS) produced by sludge microorganisms play a definite role in sludge flocculation. In this study, 25 EPS producing strains were isolated from municipal wastewater treatment plant. Microorganisms were selected based on EPS production properties on solid agar medium. Three types of EPS (slime, capsular and bacterial broth mixture of both slime and capsular) were harvested and their characteristics were studied. EPS concentration (dry weight), viscosity and their charge (using a Zetaphoremeter) were also measured. Bioflocculability of obtained EPS was evaluated by measuring the kaolin clay flocculation activity. Six bacterial strains (BS2, BS8, BS9, BS11, BS15 and BS25) were selected based on the kaolin clay flocculation. The slime EPS was better for bioflocculation than capsular EPS and bacterial broth. Therefore, extracted slime EPS (partially purified) from six bacterial strains was studied in terms of sludge settling [sludge volume index (SVI)] and dewatering [capillary suction time (CST)]. Biopolymers produced by individual strains substantially improved dewaterability. The extracted slime EPS from six different strains were partially characterized.

Synthesis of nanoparticles by microorganisms and their application in enhancing microbiological reaction rates.

Nanotechnology has attracted a great interest in recent years due to its expected impact on many areas such as energy, medicine, electronics, and space industries. This review provides the state-of-art knowledge on the synthesis of nanoparticles by microorganisms including bacteria, fungi, actinomycetes, and yeast, and their effect on microbiological processes. The available microbes and their predicted nanoparticle biosynthesis mechanism, the conditions to control the size/shape and monodispersity of particles, and microbiological reaction rate enhancement using nanoparticles as catalysts are presented. The current limitations and future scope for specific research are also discussed.

Effects of Ionic Strength, Temperature, and pH on Degradation of Selected Antibiotics

Aqueous degradation rates, which include hydrolysis and epimerization, for chlortetracycline (CTC), oxytetracycline (OTC), tetracycline (TET), lincomycin (LNC), sulfachlorpyridazine (SCP), sulfadimethoxine (SDM), sulfathiazole (STZ), trimethoprim (TRM), and tylosin A (TYL) were studied as a function of ionic strength (0.0015, 0.050, or 0.084 mg/L as Na(2)HPO(4)), temperature (7, 22, and 35 degrees C), and pH (2, 5, 7, 9, and 11). Multiple linear regression revealed that ionic strength did not significantly affect (alpha = 0.05) degradation rates for all compounds, but temperature and pH affected rates for CTC, OTC, and TET significantly (alpha = 0.05). Degradation also was observed for TYL at pH 2 and 11. No significant degradation was observed for LNC, SCP, SDM, STZ, TRM, and TYL (pH 5, 7, and 9) under study conditions. Pseudo first-order rate constants, half-lives, and Arrhenius coefficients were calculated where appropriate. In general, hydrolysis rates for CTC, OTC, and TET increased as pH and temperature increased following Arrhenius relationships. Known degradation products were used to confirm that degradation had occurred, but these products were not quantified. Half-lives ranged from less than 6 h up to 9.7 wk for the tetracyclines and for TYL (pH 2 and 11), but no degradation of LIN, the sulfonamides, or TRM was observed during the study period. These results indicate that tetracyclines and TYL at pH 2 and 11 are prone to pH-mediated transformation and hydrolysis in some cases, but not the sulfonamides, LIN nor TRM are inclined to degrade under study conditions. This indicates that with the exception of CTC, OTC, and TET, pH-mediated reactions such as hydrolysis and epimerization are not likely removal mechanisms in surface water, anaerobic swine lagoons, wastewater, and ground water.

Physico-chemical pre-treatment and biotransformation of wastewater and wastewater sludge - fate of bisphenol A.

Bisphenol A (BPA), an endocrine disrupting compound largely used in plastic and paper industry, ends up in aquatic systems via wastewater treatment plants (WWTPs) among other sources. The identification and quantification of BPA in wastewater (WW) and wastewater sludge (WWS) is of major interest to assess the endocrine activity of treated effluent discharged into the environment. Many treatment technologies, including various pre-treatment methods, such as hydrolysis, Fenton oxidation, peroxidation, ultrasonication and ozonation have been developed in order to degrade BPA in WW and WWS and for the production of WWS based value-added products (VAPs). WWS based VAPs, such as biopesticides, bioherbicides, biofertilizers, bioplastics and enzymes are low cost biological alternatives that can compete with chemicals or other cost intensive biological products in the current markets. However, this field application is disputable due to the presence of these organic compounds which has been discussed with a perspective of simultaneous degradation. The pre-treatment produces an impact on rheology as well as value-addition which has been reviewed in this paper. Various analytical techniques available for the detection of BPA in WW and WWS are also discussed. Presence of heavy metals and possible thermodynamical behavior of the compound in WW and WWS can have major impact on BPA removal, which is also included in the review.

Studies on the production of B. thuringiensis based biopesticides using wastewater sludge as a raw material.

Growth and delta-endotoxin yield of Bacillus thuringiensis (Bt) subsp kurstaki in tryptic soy yeast extract (TSY) medium, soybean meal based commercial medium and wastewater sludge medium were studied. The viable spores (VS) count in sludge medium was comparable to that obtained in laboratory and commercial media. The entomotoxicity of the fermentation liquid (Bt grown sludge) against Choristoneura fumiferana was comparable to the concentrated commercial Bt formulation available in the market (Foray 48B). A higher entomotoxicity was observed in a sludge medium than in the TSY or soybean meal media. The secondary and mixed (mixture of primary and secondary) sludges from various wastewater treatment plants were also evaluated for spore formation and entomotoxicity yield. The VS count was higher in a mixed sludge compared to the secondary sludge at a similar sludge solids concentration. Both VS count and entomotoxicity yield was found to be a function of sludge solids concentration in the medium. The optimum value of solids concentration for Bt production was found to be 25 g (-1) (dry weight basis). Beyond this concentration, a drop in VS count and entomotoxicity yield was observed. A low C:N ratio in the secondary sludge and a high C:N ratio in the mixed sludge resulted in a higher entomotoxicity. The optimum value of C:N ratio in combined sludge for Bt production was found to be 7.9-9.9. Relationships between entomotoxicity and maximum specific growth as well as with specific sporulation rate were developed.