Raphael C. Pooser

Entangled Images from Four-Wave Mixing

Two beams of light can be quantum mechanically entangled through correlations of their phase and intensity fluctuations. For a pair of spatially extended image-carrying light fields, the concept of entanglement can be applied not only to the entire images but also to their smaller details. We used a spatially multimode amplifier based on four-wave mixing in a hot vapor to produce twin images that exhibit localized entanglement. The images can be bright fields that display position-dependent quantum noise reduction in their intensity difference or vacuum twin beams that are strongly entangled when projected onto a large range of different spatial modes. The high degree of spatial entanglement demonstrates that the system is an ideal source for parallel continuous-variable quantum information protocols.

Tunable delay of Einstein–Podolsky–Rosen entanglement

Entangled systems display correlations that are stronger than can be obtained classically. This makes entanglement an essential resource for a number of applications, such as quantum information processing, quantum computing and quantum communications. The ability to control the transfer of entanglement between different locations will play a key role in these quantum protocols and enable quantum networks. Such a transfer requires a system that can delay quantum correlations without significant degradation, effectively acting as a short-term quantum memory. An important benchmark for such systems is the ability to delay Einstein–Podolsky–Rosen (EPR) levels of entanglement and to be able to tune the delay. EPR entanglement is the basis for a number of quantum protocols, allowing the remote inference of the properties of one system (to better than its standard quantum limit) through measurements on the other correlated system. Here we show that a four-wave mixing process based on a double-lambda scheme in hot 85Rb vapour allows us to obtain an optically tunable delay for EPR entangled beams of light. A significant maximum delay, of the order of the width of the cross-correlation function, is achieved. The four-wave mixing also preserves the quantum spatial correlations of the entangled beams. We take advantage of this property to delay entangled images, making this the first step towards a quantum memory for images.

Realization of low frequency and controllable bandwidth squeezing based on a four-wave-mixing amplifier in rubidium vapor.

We experimentally demonstrate the creation of two correlated beams generated by a nondegenerate four-wave-mixing amplifier at λ=795 nm in hot rubidium vapor. We achieve intensity difference squeezing at frequencies as low as 1.5 kHz which is so far the lowest frequency to observe squeezing in an atomic system. The squeezing spans from 5.5 to 16.5 MHz with a maximum squeezing of -5 dB at 1 MHz. We can control the squeezing bandwidth by changing the pump power. Both low frequency and controllable bandwidth squeezing show great potential in sensitivity detection and precise control of the atom optics measurement.

Compact diode-laser-pumped quantum light source based on four-wave mixing in hot rubidium vapor

Using a nondegenerate four-wave mixing process in hot rubidium vapor, we demonstrate a compact diode-laser-pumped system for the generation of intensity-difference squeezing down to 8 kHz with a maximum squeezing of -7 dB. To the best of our knowledge, this is the first demonstration of kilohertz-level intensity-difference squeezing using a semiconductor laser as the pump source. This scheme is of interest for experiments involving atomic ensembles, quantum communications, and precision measurements. The diode-laser-pumped system would extend the range of possible applications for squeezing due to its low cost, ease of operation, and ease of integration.

Quantum correlated light beams from non-degenerate four-wave mixing in an atomic vapor: the D1 and D2 lines of 85Rb and 87Rb.

We present experimental results showing that quantum correlated light can be produced using non-degenerate, off-resonant, four-wave mixing (4WM) on both the D1 (795 nm) and D2 (780 nm) lines of (85)Rb and (87)Rb, extending earlier work on the D1 line of (85)Rb. Using this 4WM process in a hot vapor cell to produce bright twin beams, we characterize the degree of intensity-difference noise reduction below the standard quantum limit for each of the four systems. Although each system approximates a double-lambda configuration, differences in details of the actual level structure lead to varying degrees of noise reduction. The observation of quantum correlations on light produced using all four of these systems, regardless of their substructure, suggests that it should be possible to use other systems with similar level structures in order to produce narrow frequency, non-classical beams at a particular wavelength.

Nonlinear optical magnetometry with accessible in situ optical squeezing

We demonstrate compact and accessible squeezed-light magnetometry using four-wave-mixing in a single hot rubidium vapor cell. This framework enables 4.7 dB of quantum-noise-reduction while simultaneously adding nonlinear-magneto-optical-rotation(NMOR) signals from the probe and conjugate fields.

Toward real-time quantum imaging with a single pixel camera

We present a workbench for the study of real-time quantum imaging by measuring the frame-by-frame quantum noise reduction of multi-spatial-mode twin beams generated by four wave mixing in Rb vapor. Exploiting the multiple spatial modes of this squeezed light source, we utilize spatial light modulators to selectively pass macropixels of quantum correlated modes from each of the twin beams to a high quantum efficiency balanced detector. In low-light-level imaging applications, the ability to measure the quantum correlations between individual spatial modes and macropixels of spatial modes with a single pixel camera will facilitate compressive quantum imaging with sensitivity below the photon shot noise limit.

Continuous Variable Cluster State Generation over the Optical Spatial Mode Comb

One way quantum computing uses single qubit projective measurements performed on a cluster state (a highly entangled state of multiple qubits) in order to enact quantum gates. The model is promising due to its potential scalability; the cluster state may be produced at the beginning of the computation and operated on over time. Continuous variables (CV) offer another potential benefit in the form of deterministic entanglement generation. This determinism can lead to robust cluster states and scalable quantum computation. Recent demonstrations of CV cluster states have made great strides on the path to scalability utilizing either time or frequency multiplexing in optical parametric oscillators (OPO) both above and below threshold. The techniques relied on a combination of entangling operators and beam splitter transformations. Here we show that an analogous transformation exists for amplifiers with Gaussian inputs states operating on multiple spatial modes. By judicious selection of local oscillators (LOs), the spatial mode distribution is analogous to the optical frequency comb consisting of axial modes in an OPO cavity. We outline an experimental system that generates cluster states across the spatial frequency comb which can also scale the amount of quantum noise reduction to potentially larger than in other systems.

FPGA-based gating and logic for multichannel single photon counting

We present results characterizing multichannel InGaAs single photon detectors utilizing gated passive quenching circuits (GPQC), self-differencing techniques, and field programmable gate array (FPGA)-based logic for both diode gating and coincidence counting. Utilizing FPGAs for the diode gating frontend and the logic counting backend has the advantage of low cost compared to custom built logic circuits and current off-the-shelf detector technology. Further, FPGA logic counters have been shown to work well in quantum key distribution (QKD) test beds. Our setup combines multiple independent detector channels in a reconfigurable manner via an FPGA backend and post processing in order to perform coincidence measurements between any two or more detector channels simultaneously. Using this method, states from a multi-photon polarization entangled source are detected and characterized via coincidence counting on the FPGA. Photons detection events are also processed by the quantum information toolkit for application testing (QITKAT).

Toward quantum plasmonic networks

Here, we demonstrate the transduction of macroscopic quantum entanglement by independent, distant plasmonic structures embedded in separate thin silver films. In particular, we show that the plasmon-mediated transmission through each film conserves spatially dependent, entangled quantum images, opening the door for the implementation of parallel quantum protocols, super-resolution imaging, and quantum plasmonic sensing geometries at the nanoscale level. The conservation of quantum information by the transduction process shows that continuous variable multi-mode entanglement is momentarily transferred from entangled beams of light to the space-like separated, completely independent plasmonic structures, thus providing a first important step toward establishing a multichannel quantum network across separate solid-state substrates.