Ravichandra Srinivasa Jupudi

Multidimensional Modeling and Validation of Dual-Fuel Combustion in a Large Bore Medium Speed Diesel Engine

High fidelity, three-dimensional CFD was used to model the flow, fuel injection, combustion, and emissions in a large bore medium speed diesel engine with different levels of natural gas substitution. Detailed chemical kinetics was used to model the complex combustion behavior of the premixed natural gas, ignited via a diesel spray. The numerical predictions were compared against measured multiple cycle pressure data, to understand the possible factors affecting cyclic variation in experimental data. Under conditions with high natural gas substitution rates, diesel was injected much earlier than firing-TDC. This additional mixing time allowed the active radicals from diesel dissociation to initiate combustion from the cylinder wall and propagate inwards. 0%, 60%, and 93% natural gas substitution rates (by energy) were tested in this study to develop computational capabilities needed to accurately model and understand the underlying physics. Several innovative computational methods such as adaptive mesh refinement (which automatically refines and coarsens the mesh based on the existing solution parameters), and multi-zoning (which groups chemically similar cells together to reduce combustion calculation time) were utilized to obtain accurate predictions at a lower computational cost. Important engine emissions such as NOx, CO, unburnt HC, and soot were predicted numerically and compared against measured engine data.Copyright

Modeling Bubble Flow and Current Density Distribution in an Alkaline Electrolysis Cell

The effect of bubbles on the current density distribution over the electrodes of an alkaline electrolyzer cell is studied using a two-dimensional computational fluid dynamics model. Model includes Eulerian-Eulerian two-phase flow methodology to model the multiphase flow of Hydrogen and Oxygen with water and the behavior of each phase is accounted for using first principle. Hydrogen/Oxygen evolution, flow field and current density distribution are incorporated in the model to account for the complicated physics involved in the process. Fluent 6.2 is used to solve two-phase flow and electrochemistry is incorporated using UDF (User Defined Function) feature of Fluent. Model is validated with mesh refinement study and by comparison with experimental measurements. Model is found to replicate the effect of cell voltage and inter-electrode gap (distance between the electrodes) on current density accurately. Further, model is found to capture the existence of optimum cell height. The validated model is expected t...

Cycle to Cycle Variation Study in a Dual Fuel Operated Engine

This research used resources of the KAUST Supercomputing Laboratory located at King Abdullah University of Science and Technology, Saudi Arabia. Components of this work were supported by the U.S. Department of Energy, Vehicle Technologies Office.