Rehana Afrin

Spectrin-ankyrin interaction mechanics: A key force balance factor in the red blood cell membrane skeleton.

As major components of red blood cell (RBC) cytoskeleton, spectrin and F-actin form a network that covers the entire cytoplasmic surface of the plasma membrane. The cross-linked two layered structure, called the membrane skeleton, keeps the structural integrity of RBC under drastically changing mechanical environment during circulation. We performed force spectroscopy experiments on the atomic force microscope (AFM) as a means to clarify the mechanical characteristics of spectrin-ankyrin interaction, a key factor in the force balance of the RBC cytoskeletal structure. An AFM tip was functionalized with ANK1-62k and used to probe spectrin crosslinked to mica surface. A force spectroscopy study gave a mean unbinding force of ~30 pN under our experimental conditions. Two energy barriers were identified in the unbinding process. The result was related to the well-known flexibility of spectrin tetramer and participation of ankyrin 1-spectrin interaction in the overall balance of membrane skeleton dynamics.

Pretransition and progressive softening of bovine carbonic anhydrase II as probed by single molecule atomic force microscopy

To develop a simple method for probing the physical state of surface adsorbed proteins, we adopted the force curve mode of an atomic force microscope (AFM) to extract information on the mechanical properties of surface immobilized bovine carbonic anhydrase II under native conditions and in the course of guanidinium chloride–induced denaturation. A progressive increase in the population of individually softened molecules was probed under mildly to fully denaturing conditions. The use of the approach regime of force curves gave information regarding the height and rigidity of the molecule under compressive stress, whereas use of the retracting regime of the curves gave information about the tensile characteristics of the protein. The results showed that protein molecules at the beginning of the transition region possessed slightly more flattened and significantly more softened conformations compared with that of native molecules, but were still not fully denatured, in agreement with results based on solution studies. Thus the force curve mode of an AFM was shown to be sensitive enough to provide information concerning the different physical states of single molecules of globular proteins.

Toward mechanical manipulations of cell membranes and membrane proteins using an atomic force microscope: an invited review.

Recent advances in the use of the atomic force microscope (AFM) for manipulating cell membranes and membrane proteins are reviewed. Early pioneering work on measurements of the magnitude of the force required to create indentations with defined depth on their surfaces and to separate interacting pairs of avidin-biotin, antigen-antibody, and complementary DNA pairs formed the basis of this field. The method has subsequently been applied to map the presence of cell surface receptors and polysaccharides on live cell membranes by force measurement, with promising results. Attempts to extract phospholipids and proteins from lipid bilayers and live cell surfaces have been reported, providing a new tool for the manipulation of cellular activities and biochemical analysis at the single-cell level. An increasing awareness of the effect of the pulling speed (nm/s or μm/s), or more accurately, the force loading rate (pN/s or nN/s) on the magnitude of the rupture force, has led researchers to construct energy diagrams of rupture events based on the parameters available from such studies. Information on such nature of the interplay of force and loading rate is vital for nanomanipulation of living cells and cell membranes. Some relevant work for membrane manipulation using other methods is also reviewed in relation to AFM-based methodology.

Extraction of membrane proteins from a living cell surface using the atomic force microscope and covalent crosslinkers

The force curve mode of the atomic force microscope (AFM) was applied to extract intrinsic membrane proteins from the surface of live cells using AFM tips modified by amino reactive bifunctional covalent crosslinkers. The modified AFM tips were individually brought into brief contact with the living cell surface to form covalent bonds with cell surface molecules. The force curves recorded during the detachment process from the cell surface were often characterized by an extension of a few hundred nanometers followed mostly by a single step jump to the zero force level. Collection and analysis of the final rupture force revealed that the most frequent force values (of the force) were in the range of 0.4–0.6 nN. The observed rupture force most likely represented extraction events of intrinsic membrane proteins from the cell membrane because the rupture force of a covalent crosslinking system was expected to be significantly larger than 1.0 nN, and the separation force of noncovalent ligand-receptor pairs to be less than 0.2 nN, under similar experimental conditions. The transfer of cell surface proteins to the AFM tip was verified by recording characteristic force curves of protein stretching between the AFM tips used on the cell surface and a silicon surface modified with amino reactive bifunctional crosslinkers. This method will be a useful addition to bionanotechnological research for the application of AFM.

Atomic force microscopy for cellular level manipulation: imaging intracellular structures and DNA delivery through a membrane hole

The atomic force microscope (AFM) is a versatile tool for imaging, force measurement and manipulation of proteins, DNA, and living cells basically at the single molecular level. In the cellular level manipulation, extraction, and identification of mRNAs from defined loci of a cell, insertion of plasmid DNA and pulling of membrane proteins, for example, have been reported. In this study, AFM was used to create holes at defined loci on the cell membrane for the investigation of viability of the cells after hole creation, visualization of intracellular structure through the hole and for targeted gene delivery into living cells. To create large holes with an approximate diameter of 5–10 µm, a phospholipase A2 coated bead was added to the AFM cantilever and the bead was allowed to touch the cell surface for approximately 5–10 min. The evidence of hole creation was obtained mainly from fluorescent image of Vybrant DiO labeled cell before and after the contact with the bead and the AFM imaging of the contact area. In parallel, cells with a hole were imaged by AFM to reveal intracellular structures such as filamentous structures presumably actin fibers and mitochondria which were identified with fluorescent labeling with rhodamine 123. Targeted gene delivery was also attempted by inserting an AFM probe that was coated with the Monster Green Fluorescent Protein phMGFP Vector for transfection of the cell. Following targeted transfection, the gene expression of green fluorescent protein (GFP) was observed and confirmed by the fluorescence microscope. Copyright

Single molecular dynamic interactions between glycophorin A and lectin as probed by atomic force microscopy.

Glycophorin A (GpA) is one of the most abundant transmembrane proteins in human erythrocytes and its interaction with lectins has been studied as model systems for erythrocyte related biological processes. We performed a force measurement study using the force mode of atomic force microscopy (AFM) to investigate the single molecular level biophysical mechanisms involved in GpA-lectin interactions. GpA was mounted on a mica surface or natively presented on the erythrocyte membrane and probed with an AFM tip coated with the monomeric but multivalent Psathyrella velutina lectin (PVL) through covalent crosslinkers. A dynamic force spectroscopy study revealed similar interaction properties in both cases, with the unbinding force centering around 60 pN with a weak loading rate dependence. Hence we identified the presence of one energy barrier in the unbinding process. Force profile analysis showed that more than 70% of GpAs are free of cytoskeletal associations in agreement with previous reports.

Pulling and Pushing Protein Molecules by AFM

This paper reviews a recent progress of molecular level studies on the rigidity of surface immobilized as well as membrane bound proteins embedded in the lipid bilayer. Some details and emphasis are given to the work done in our laboratory in the last few years. Immobilization of protein molecules on a solid surface through covalent crosslinkers on one side and to the probe of the atomic force microscope on the other enabled us to pull or push a single protein molecule to specified directions. On pulling, the internal structure of the protein molecule is mechanically opened up and, on pushing, it is compressively deformed until it is flattened out. Such experiments reveal the mechanical rigidity of the folded structure of a protein molecule in two different ways. In the field of ligand-protein interaction, some merits and problems of newly introduced compression free method are discussed. When a protein molecule is embedded in a lipid membrane, information on its anchoring force to the membrane can be obtained by pulling it out from the membrane. Experiments have been done either on a lipid bilayer formed on a solid surface, or on the surface of live cells. The extraction process of membrane proteins is often accompanied by extrusion of a thin lipid tether trailing behind the target protein of the tensile force. A short review of the tether forming process from the red cell membrane surface will be given.

Nano-Mechanical Methods in Biochemistry using Atomic Force Microscopy

The atomic force microscope has been extensively used not only to image nanometer-sized biological samples but also to measure their mechanical properties by using the force curve mode of the instrument. When the analysis based on the Hertz model of indentation is applied to the approach part of the force curve, one obtains information on the stiffness of the sample in terms of Youngs modulus. Mapping of local stiffness over a single living cell is possible by this method. The retraction part of the force curve provides information on the adhesive interaction between the sample and the AFM tip. It is possible to functionalize the AFM tip with specific ligands so that one can target the adhesive interaction to specific pairs of ligands and receptors. The presence of specific receptors on the living cell surface has been mapped by this method. The force to break the co-operative 3D structure of globular proteins or to separate a double stranded DNA into single strands has been measured. Extension of the method for harvesting functional molecules from the cytosol or the cell surface for biochemical analysis has been reported. There is a need for the development of biochemical nano-analysis based on AFM technology.

Tensile Mechanics of Alanine-Based Helical Polypeptide: Force Spectroscopy versus Computer Simulations

In nature, an alpha-helix is commonly used to build thermodynamically stable and mechanically rigid protein conformations. In view of growing interest in the mechanical rigidity of proteins, we measured the tensile profile of an alanine-based alpha-helical polypeptide on an atomic-force microscope to investigate the basic mechanics of helix extension with minimal interference from side-chain interactions. The peptide was extended to its maximum contour length with much less force than in reported cases of poly-L-Glu or poly-L-Lys, indicating that chain stiffness strongly depended on the physicochemical properties of side chains, such as their bulkiness. The low tensile-force extension originated presumably in locally unfolded parts because of spontaneous structural fluctuations. In 50% trifluoroethanol, the well-known helix-promoting agent, the rigidity of the sample polypeptide was markedly increased. Computer simulations of the peptide-stretching process showed that a majority of constituent residues underwent a transition from an alpha-helical to an extended conformation by overcoming an energy barrier around psi approximately 0 degrees on the Ramachandran plot. The observed lability of an isolated helix signified the biological importance of the lateral bundling of helices to maintain a rigid protein structure.

High sensitivity detection of protein molecules picked up on a probe of atomic force microscope based on the fluorescence detection by a total internal reflection fluorescence microscope.

We developed a method to detect and identify proteins on a probe of the atomic force microscope (AFM) with a high sensitivity. Due to a low background noise of the total internal reflection fluorescence microscope employed as a detecting system, we were able to achieve a high enough sensitivity to detect zeptomole orders of protein molecules immobilized on the tip. Several different methods to immobilize protein molecules to AFM‐probes were tested, meant for a wide range of applications of this method. Furthermore, we demonstrated that different proteins were clearly distinguished by immunofluorescence microscopy on the probe using their specific antibodies.