Rene Schmogrow

Error Vector Magnitude as a Performance Measure for Advanced Modulation Formats

We examine the relation between optical signal-to-noise ratio (OSNR), error vector magnitude (EVM), and bit-error ratio (BER). Theoretical results and numerical simulations are compared to measured values of OSNR, EVM, and BER. We conclude that the EVM is an appropriate metric for optical channels limited by additive white Gaussian noise. Results are supported by experiments with six modulation formats at symbol rates of 20 and 25 GBd generated by a software-defined transmitter.

Real-time Nyquist pulse generation beyond 100 Gbit/s and its relation to OFDM.

Nyquist sinc-pulse shaping provides spectral efficiencies close to the theoretical limit. In this paper we discuss the analogy to optical orthogonal frequency division multiplexing and compare both techniques with respect to spectral efficiency and peak to average power ratio. We then show that using appropriate algorithms, Nyquist pulse shaped modulation formats can be encoded on a single wavelength at speeds beyond 100 Gbit/s in real-time. Finally we discuss the proper reception of Nyquist pulses.

Photonic wire bonding: a novel concept for chip-scale interconnects.

Photonic integration requires a versatile packaging technology that enables low-loss interconnects between photonic chips in three-dimensional configurations. In this paper we introduce the concept of photonic wire bonding, where polymer waveguides with three-dimensional freeform geometries are used to bridge the gap between nanophotonic circuits located on different chips. In a proof-of-principle experiment, we demonstrate the fabrication of single-mode photonic wire bonds (PWB) by direct-write two-photon lithography. First-generation prototypes allow for efficient broadband coupling with average insertion losses of only 1.6 dB in the C-band and can carry wavelength-division multiplexing signals with multi-Tbit/s data rates. Photonic wire bonding is well suited for automated mass production, and we expect the technology to enable optical multi-chip systems with enhanced performance and flexibility.Photonic integration has witnessed tremendous progress over the last years, and chip-scale transceiver systems with Terabit/s data rates have come into reach. However, as on-chip integration density increases, efficient off-chip interfaces are becoming more and more crucial. A technological breakthrough is considered indispensable to cope with the challenges arising from large-scale photonic integration, and this particularly applies to short-distance optical interconnects. In this letter we introduce the concept of photonic wire bonding, where transparent waveguide wire bonds are used to bridge the gap between nanophotonic circuits located on different chips. We demonstrate for the first time the fabrication of three-dimensional freeform photonic wire bonds (PWB), and we confirm their viability in a multi-Terabit/s data transmission experiment. First-generation prototypes allow for efficient broadband coupling with overall losses of only 1.6 dB. Photonic wire bonding will enable flexible optical multi-chip assemblies, thereby challenging the current paradigm of highly-complex monolithic integration.

Real-Time Software-Defined Multiformat Transmitter Generating 64QAM at 28 GBd

We demonstrate a software-defined real-time optical multiformat transmitter. Here, eight different modulation formats are shown. Data rate and modulation formats are defined through software accessible look-up tables enabling format switching in the nanosecond regime without changing the transmitter hardware. No data are lost during the switching process. SP-64 quadrature amplitude modulation at 28 Gbd has been generated and tested. This allows us to generate a 336-Gb/s real-time pseudorandom bit sequence in a dual polarization setup.

Single-laser 32.5 Tbit/s Nyquist WDM transmission

Single-laser 32.5 Tbit/s 16QAM Nyquist-WDM transmission with 325 carriers over 227 km at a net spectral efficiency of 6.4 bit/s/Hz is reported.

Silicon-organic hybrid (SOH) IQ modulator using the linear electro-optic effect for transmitting 16QAM at 112 Gbit/s

Advanced modulation formats call for suitable IQ modulators. Using the silicon-on-insulator (SOI) platform we exploit the linear electro-optic effect by functionalizing a photonic integrated circuit with an organic χ(2)-nonlinear cladding. We demonstrate that this silicon-organic hybrid (SOH) technology allows the fabrication of IQ modulators for generating 16QAM signals with data rates up to 112 Gbit/s. To the best of our knowledge, this is the highest single-polarization data rate achieved so far with a silicon-integrated modulator. We found an energy consumption of 640 fJ/bit.

Single source optical OFDM transmitter and optical FFT receiver demonstrated at line rates of 5.4 and 10.8 Tbit/s

OFDM data with line rates of 5.4 Tbit/s or 10.8 Tbit/s are generated and decoded with a new real-time all-optical FFT receiver. Each of 75 carriers of a comb source is encoded with 18 GBd QPSK or 16-QAM.

512QAM Nyquist sinc-pulse transmission at 54 Gbit/s in an optical bandwidth of 3 GHz.

We demonstrate for the first time transmission of 54 Gbit/s and 48 Gbit/s over 44 km and 150 km, respectively, utilizing an optical bandwidth of only 3 GHz. We used polarization division multiplexed 512QAM and 256QAM modulation formats in combination with Nyquist pulse shaping having virtually zero roll-off. The resulting spectral efficiencies range up to 18 bit/s/Hz and 16 bit/s/Hz, respectively. Taking into account the overhead required for forward error correction, the occupied signal bandwidth corresponds to net spectral efficiencies of 14.4 bit/s/Hz and 15 bit/s/Hz, which could be achieved in a wavelength division multiplexed network without spectral guard bands.

Silicon-organic hybrid (SOH) frequency comb sources for terabit/s data transmission

We demonstrate frequency comb sources based on silicon-organic hybrid (SOH) electro-optic modulators. Frequency combs with line spacings of 25 GHz and 40 GHz are generated, featuring flat-top spectra with less than 2 dB power variations over up to 7 lines. The combs are used for WDM data transmission at terabit/s data rates and distances of up to 300 km.

Real-time OFDM transmitter beyond 100 Gbit/s

Real-time OFDM transmitters breaking the 100 Gbit/s barrier require high-performance, usually FPGA-based digital signal processing. Especially the Fourier transform as a key operation of any OFDM system must be optimized with respect to performance and chip area utilization. Here, we demonstrate an alternative to the widely adopted fast Fourier transform algorithm. Based on an extensive yet optimized use of pre-set look-up tables, our FPGA implementation supports fast reconfigurable channel equalization and switching times in the nanosecond range without re-loading any code. We demonstrate the potential of the concept by realizing the first real-time single polarization OFDM transmitter generating a 101.5 Gbit/s data stream by modulating 58 subcarriers with 16QAM.