Renjun Pei

Molecular robots guided by prescriptive landscapes

Traditional robots rely for their function on computing, to store internal representations of their goals and environment and to coordinate sensing and any actuation of components required in response. Moving robotics to the single-molecule level is possible in principle, but requires facing the limited ability of individual molecules to store complex information and programs. One strategy to overcome this problem is to use systems that can obtain complex behaviour from the interaction of simple robots with their environment. A first step in this direction was the development of DNA walkers, which have developed from being non-autonomous to being capable of directed but brief motion on one-dimensional tracks. Here we demonstrate that previously developed random walkers—so-called molecular spiders that comprise a streptavidin molecule as an inert ‘body’ and three deoxyribozymes as catalytic ‘legs’—show elementary robotic behaviour when interacting with a precisely defined environment. Single-molecule microscopy observations confirm that such walkers achieve directional movement by sensing and modifying tracks of substrate molecules laid out on a two-dimensional DNA origami landscape. When using appropriately designed DNA origami, the molecular spiders autonomously carry out sequences of actions such as ‘start’, ‘follow’, ‘turn’ and ‘stop’. We anticipate that this strategy will result in more complex robotic behaviour at the molecular level if additional control mechanisms are incorporated. One example might be interactions between multiple molecular robots leading to collective behaviour; another might be the ability to read and transform secondary cues on the DNA origami landscape as a means of implementing Turing-universal algorithmic behaviour.

Amplification of antigen–antibody interactions based on biotin labeled protein–streptavidin network complex using impedance spectroscopy

Antibody was covalently immobilized by amine coupling method to gold surfaces modified with a self-assembled monolayer of thioctic acid. The electrochemical measurements of cyclic voltammetry and impedance spectroscopy showed that the hexacyanoferrate redox reactions on the gold surface were blocked due to the procedures of self-assembly of thioctic acid and antibody immobilization. The binding of a specific antigen to antibody recognition layer could be detected by measurements of the impedance change. A new amplification strategy was introduced for improving the sensitivity of impedance measurements using biotin labeled protein-streptavidin network complex. This amplification strategy is based on the construction of a molecular complex between streptavidin and biotin labeled protein. This complex can be formed in a cross-linking network of molecules so that the amplification of response signal will be realized due to the big molecular size of complex. The results show that this amplification strategy causes dramatic improvement of the detection sensitivity of hIgG and has good correlation for detection of hIgG in the range of 2-10 microg/ml.

Layer-by-layer assembly of multilayer films composed of avidin and biotin-labeled antibody for immunosensing

Protein multilayers composed of avidin and biotin-labeled antibody (bio-Ab) were prepared on gold surface by layer-by-layer assembly technology using the high specific binding constant (K(a): approximately 10(15) M(-1)) between avidin and biotin. The assembly process of the multilayer films was monitored by using real-time BIA technique based on surface plasmon resonance (SPR). The multilayer films were also characterized by electrochemical impedance spectroscopy (EIS) and reflection absorption Fourier transform infrared spectroscopy (FTIR). The results indicate that the growth of the multilayer is uniform. From response of SPR for each layer, the stoichiometry S for the interaction between avidin and bio-Ab is calculated to be 0.37 in the multilayer whereas 0.82 in the first layer. The protein mass concentration for each layer was also obtained. The schematic figure for the multilayer assembly was proposed according to the layer mass concentration and S value. The utility of the mutilayer films for immunosensing has been investigated via their subsequent interaction with hIgG. The binding ability of the multilayer increased for one to three layers of antibody, and then reach saturation after the fourth layer. These layer-by-layer constructed antibody multilayers enhance the binding ability than covalently immobilized monolayer antibody. This technology can be also used for construction of other thin films for immunosensing and biosensor.

Real-time immunoassay of antibody activity in serum by surface plasmon resonance biosensor

A surface plasmon resonance biosensor has been used to determine antibody activity in serum. As a model system, the interaction of mouse IgG and sheep anti-mouse IgG polyclonal antibody was investigated in real time. The factors, including pH value, ionic strength, protein concentration, influencing electrostatic adsorption of mouse IgG protein onto carboxylated dextran-coated sensor chip surface, were studied. The procedures of mouse IgG protein immobilization and immune reaction were monitored in real time. The regeneration effect using the different elution reagents was also investigated. The same mouse IgG immobilized surface can be used for 100 cycles of binding and elution with only 0.38% loss per regeneration in reactivity. The results show that the surface plasmon resonance biosensor is a rapid, simple, sensitive, accurate and reliable detection technique for real-time immunoassay of antibody activity. The assay allows antibodies to be detected and studied in their native form without any purification.

Specific capture and temperature-mediated release of cells in an aptamer-based microfluidic device

Isolation of cells from heterogeneous mixtures is critically important in both basic cell biology studies and clinical diagnostics. Cell isolation can be realized based on physical properties such as size, density and electrical properties. Alternatively, affinity binding of target cells by surface-immobilized ligands, such as antibodies, can be used to achieve specific cell isolation. Microfluidics technology has recently been used in conjunction with antibody-based affinity isolation methods to capture, purify and isolate cells with higher yield rates, better efficiencies and lower costs. However, a method that allows easy release and collection of live cells from affinity surfaces for subsequent analysis and detection has yet to be developed. This paper presents a microfluidic device that not only achieves specific affinity capture and enrichment, but also enables non-destructive, temperature-mediated release and retrieval of cells. Specific cell capture is achieved using surface-immobilized aptamers in a microchamber. Release of the captured cells is realized by a moderate temperature change, effected via integrated heaters and a temperature sensor, to reversibly disrupt the cell-aptamer interaction. Experimental results with CCRF-CEM cells have demonstrated that the device is capable of specific capture and temperature-mediated release of cells, that the released cells remain viable and that the aptamer-functionalized surface is regenerable.

Logic gates based on G-quadruplexes: principles and sensor applications

AbstractThis review (with 139 refs.) gives a fundamental introduction into the sensors and logic gates based on G-quadruplexes (G4s). G4 characterizes vibrant binding activities and topology diversity, which contribute to the multiple signal output modes (including labeled moieties based on distance changes, label-free outputs by employing fluorescent ligands, G4/hemin DNAzyme with catalyzing activity and colorimetric readout using gold nanoparticles) and versatile design strategies (including target-induced G4 formation/disruption, liberation of blocked G4, split G4 probes, polymerase-assisted amplification and G4/hemin enrichment on sensor surface) of G4s-based methods. Following two important trends in logic gates (application of intelligent detection schemes and logic circuit constructions), specific sections review logic sensors and logic circuits based on G4s with several representative examples. We close this review with conclusions and give a perspective that employment of DNA technologies (such as aptamers, DNA junctions/origami, toehold-mediated strand displacement, enzyme-assisted amplification, metal ion-dependent DNAzymes) and various nanomaterials in G4s-based methods results in quite a large potential in terms of logic detection and construction of logic circuits. Graphical AbstractThe vibrant binding activities, different structural topologies, multiple signal output modes and a variety of designing strategies contribute to the versatile roles of G-quadruplexes in the application and development of DNA logic gates and logic circuits.

Light-up properties of complexes between thiazole orange-small molecule conjugates and aptamers

The full understanding of dynamics of cellular processes hinges on the development of efficient and non-invasive labels for intracellular RNA species. Light-up aptamers binding fluorogenic ligands show promise as specific labels for RNA species containing those aptamers. Herein, we took advantage of existing, non-light-up aptamers against small molecules and demonstrated a new class of light-up probes in vitro. We synthesized two conjugates of thiazole orange dye to small molecules (GMP and AMP) and characterized in vitro their interactions with corresponding RNA aptamers. The conjugates preserved specific binding to aptamers while showing several 100-fold increase in fluorescence of the dye (the ‘light-up’ property). In the presence of free small molecules, conjugates can be displaced from aptamers serving also as fluorescent sensors. Our in vitro results provide the proof-of-concept that the small-molecule conjugates with light-up properties can serve as a general approach to label RNA sequences containing aptamers.

Optimizing cross-reactivity with evolutionary search for sensors.

We report a straightforward evolutionary procedure to build an optimal sensor array from a pool of DNA sequences oriented toward three-way junctions. The individual sensors were mined from this pool under separate selection pressures to interact with four steroids, while allowing cross-reactivity, in a manner designed to achieve perfect classification of individual steroids. The resulting sensor array had three sensors and displayed discriminatory capacity between steroid classes over full ranges of concentrations. We propose that similar protocols can be used whenever we have two or more classes of samples, with individual classes being defined through gross differences in ratios of dominant families of responsive components.

Enhanced surface plasmon resonance immunosensing using a streptavidin-biotinylated protein complex.

In this paper, we present a novel strategy for improving the sensitivity of surface plasmon resonance immunosensing using a streptavidin-biotinylated protein complex. This amplification strategy is based on the construction of a molecular complex between streptavidin and biotin labeled protein. The complex can be formed in a cross-linking network of molecules so that the amplification of the response signal will be realized due to the big molecular size of the complex. The results show that the amplification strategy causes a dramatic improvement of the detection sensitivity. hIgG protein could be detected in the range of 0.005-10 micrograms ml-1.

Hydrophobic IR-780 Dye Encapsulated in cRGD-Conjugated Solid Lipid Nanoparticles for NIR Imaging-Guided Photothermal Therapy

This is high demand to enhance the accumulation of near-infrared theranostic agents in the tumor region, which is favorable to the effective phototherapy. Compared with indocyanine green (a clinically applied dye), IR-780 iodide possesses higher and more stable fluorescence intensity and can be utilized as an imaging-guided PTT agent with laser irradiation. However, lipophilicity and short circulation time limit its applications in cancer imaging and therapy. Moreover, solid lipid nanoparticles (SLNs) conjugated with c(RGDyK) was designed as efficient carriers to improve the targeted delivery of IR-780 to the tumors. The multifunctional cRGD-IR-780 SLNs exhibited a desirable monodispersity, preferable stability and significant targeting to cell lines overexpressing αvβ3 integrin. Additionally, the in vitro assays such as cell viability and in vivo PTT treatment denoted that U87MG cells or U87MG transplantation tumors could be eradicated by applying cRGD-IR-780 SLNs under laser irradiation. Therefore, the resultant cRGD-IR-780 SLNs may serve as a promising NIR imaging-guided targeting PTT agent for cancer therapy.