Richard Bolek

The effect of storage medium on the elution of monomers from composite materials

The aim of this study was to evaluate the effect of four different storage media on the elution of monomers from two composite materials. Samples (n = 10, diameter: 4.5 mm, thickness: 2 mm) of two different composite materials (Ceram X™ & Filtek™ Supreme XT) were stored after polymerization in four different media (NaCl, saliva, ethanol 75% & acetone) for 24 h, 7 days, and 28 days. From the storage medium of each tested time period, samples were prepared and analyzed by LC-MS/MS, for the elution of BisGMA, TEGDMA, HEMA, Bisphenol A, and two types of UDMA. No monomers were detected in the samples of Ceram X™, independently of the storage medium used. In the samples of Filtek™ Supreme XT, no Bisphenol A, HEMA, and UDMA 1 were found. BisGMA was detected only in the ethanol and acetone samples. The amount of BisGMA eluted in acetone was significant higher compared with ethanol 75% (p < 0.0001). TEGDMA was the only monomer that could be detected in all tested storage media. Storage in acetone resulted in higher release of TEGDMA when compared with other media. The amount of TEGDMA released in saliva was similar to the one released in ethanol 75%. It can be concluded that acetone is not a suitable medium for elution experiments and although ethanol 75% can simulate saliva concerning the elution of TEGDMA, it does not represent a laboratory substitute of saliva with respect to the elution of monomers like BisGMA.

Determination of the antifungal agent posaconazole in human serum by HPLC with parallel column-switching technique.

Posaconazole is a new broad-spectrum antifungal agent that is currently only available as an oral suspension and shows high intra- and inter-individual differences in oral bioavailibility. Pre-existing methods for the determination of the substance involve the use of internal standards or require a quite complicated and time-consuming sample pre-treatment. Our HPLC method is fast and fully-automated and there is no need for any manual sample pre-treatment. On-line transfer of posaconazole from the extraction column was followed by chromatographic separation on a C18 column and fluorescence detection (lambda(ex): 261 nm, lambda(em): 357 nm). Retention time of posaconazole was about 11.7 min, the lower limit of quantification was found to be 0.1 mg/l. A linear calibration curve was obtained over the concentration range of 0.1-5 mg/l using a 50 microl sample (r(2)=0.999). The relative standard deviations of intra-day variations ranged from 2.3% to 9.4%, intra-day accuracy from 88.8% to 114.8%.

A comprehensive method for determination of fatty acids in the initial oral biofilm (pellicle)

The acquired pellicle is a tenacious organic layer covering the surface of teeth, protecting the underlying dental hard tissues. Lipids account for about one quarter of the pellicles dry weight and are assumed to be of considerable importance for their protective properties. Nevertheless, only preliminary information is available about the nature of lipids in the pellicle. Gas chromatography coupled with electron impact ionization mass spectrometry was used to establish a convenient analytical protocol in order to obtain a qualitative and quantitative characterization of a wide range of FAs (C12–C22). In situ biofilm formation was performed on bovine enamel slabs mounted on individual splints carried by 10 subjects. A modified Folch extraction procedure was adopted to extract the lipids from the detached pellicle, followed by transesterification to fatty acid methyl esters using methanol and concentrated hydrochloric acid. Tridecanoic and nonadecanoic acid were used as internal standards suitable and reliable for robust, precise and accurate measurements. The present study demonstrates, for the first time, a procedure based on a combination of innovative specimen generation and convenient sample preparation with sensitive GC-MS analysis for the determination of the fatty acid profile of the initial oral biofilm.

Elution of Monomers from Provisional Composite Materials

The aim of this study was to evaluate the elution of substances from different materials used for the manufacturing of temporary indirect restorations, after storage in saliva and ethanol 75%. 10 samples of three chemically cured materials (Protemp 3 Garant, Systemp.c&b, and Trim) and one light-cured material (Clip F) were stored in saliva and ethanol 75% for 24 h, 7, and days 28 days. From the storage media at each time period, samples were prepared and analysed by LC-MS/MS, in order to access the elution of monomers. The results differed among the materials ( ≤ 0.05). No monomers were detected in the samples of Protemp 3 Garant and Clip F. Substances were detected only in ethanol samples of Systemp.c&b and Trim. The amount of BisGMA, TEGDMA, and UDMA 2 released from Systemp.c&b was higher compared to Trim. Storage time affected the release of substances ( ≤ 0.05). The highest release was observed within the first 24 h. It can be concluded that provisional resin composite materials do not show high release of monomers and this release is material dependent. However, the detection of additional peaks during the analysis, suggesting the formation of by-products of the eluted substances, may not be in favour of these materials with respect to their toxicity.

Fate and Effects of Little Investigated Scents in the Aquatic Environment

The sense of smell is our most emotional sense. Although not always being aware of it, it plays an important role in our everyday live. Scents are widely used in Personal Care Products (PCPs) such as shampoo, washing lotions or make up. They give a pleasant smell, mask unpleasant scents and may even bind consumers to a specific brand. As a result, scents are being applied more and more and in turn are being introduced in increasing volumes into the environment. Their fate and effect in the environment are to date mostly unclear. Because many organisms rely on scents as means of communication, the emerging amount of scents emitted by our civilization can cause disturbances, known as “infochemical effect”.