Richard P. Haugland

Alexa Dyes, a Series of New Fluorescent Dyes that Yield Exceptionally Bright, Photostable Conjugates

Alexa 350, Alexa 430, Alexa 488, Alexa 532, Alexa 546, Alexa 568, and Alexa 594 dyes are a new series of fluorescent dyes with emission/excitation spectra similar to those of AMCA, Lucifer Yellow, fluorescein, rhodamine 6G, tetramethylrhodamine or Cy3, lissamine rhodamine B, and Texas Red, respectively (the numbers in the Alexa names indicate the approximate excitation wavelength maximum in nm). All Alexa dyes and their conjugates are more fluorescent and more photostable than their commonly used spectral analogues listed above. In addition, Alexa dyes are insensitive to pH in the 4-10 range. We evaluated Alexa dyes compared with conventional dyes in applications using various conjugates, including those of goat anti-mouse IgG (GAM), streptavidin, wheat germ agglutinin (WGA), and concanavalin A (ConA). Conjugates of Alexa 546 are at least twofold more fluorescent than Cy3 conjugates. Proteins labeled with the Alexa 568 or Alexa 594 dyes are several-fold brighter than the same proteins labeled with lissamine rhodamine B or Texas Red dyes, respectively. Alexa dye derivatives of phalloidin stain F-actin with high specificity. Hydrazide forms of the Alexa dyes are very bright, formaldehyde-fixable polar tracers. Conjugates of the Alexa 430 (ex 430 nm/em 520 nm) and Alexa 532 (ex 530 nm/em 548 nm) fluorochromes are spectrally unique fluorescent probes, with relatively high quantum yields in their excitation and emission wavelength ranges.

Analysis of mitochondrial morphology and function with novel fixable fluorescent stains.

Investigation of mitochondrial morphology and function has been hampered because photostable, mitochondrion-specific stains that are retained in fixed, permeabilized cells have not been available. We found that in live cell preparations, the CMXRos and H2-CMXRos dyes were more photostable than rhodamine 123. In addition, fluorescence and morphology of mitochondria stained with the CMXRos and CMXRos-H2 dyes were preserved even after formaldehyde fixation and acetone permeabilization. Using epifluorescence microscopy, we showed that CMXRos and H2-CMXRos dye fluorescence fully co-localized with antibodies to subunit I of cytochrome c oxidase, indicating that the dyes specifically stain mitochondria. Confocal microscopy of these mitochondria yielded colored banding patterns, suggesting that these dyes and the mitochondrial enzyme localize to different suborganellar regions. Therefore, these stains provide powerful tools for detailed analysis of mitochondrial fine structure. We also used poisons that decrease mitochondrial membrane potential and an inhibitor of respiration complex II to show by flow cytometry that the fluorescence intensity of CMXRos and H2-CMXRos dye staining responds to changes in mitochondrial membrane potential and function. Hence, CMXRos has the potential to monitor changes in mitochondrial function. In addition, CMXRos staining was used in conjunction with spectrally distinct fluorescent probes for the cell nucleus and the microtubule network to concomitantly evaluate multiple features of cell morphology.

Spectral and photophysical studies of benzo[c]xanthene dyes: Dual emission pH sensors

A series of fluorescent, long-wavelength, benzo[c]-xanthene dyes has been characterized for pH measurement in both excitation and emission ratio applications. The two general classes of these indicators are seminaphthofluoresceins (SNAFLs) and seminaphthorhodafluors (SNARFs) which are substituted at the 10-position with oxygen or nitrogen, respectively. These probes show separate emissions from the protonated and deprotonated forms of the fluorophores. The dyes may be excited at 488 or 514 nm with argon ion lasers. Most of the indicators have pKa values between 7.6 and 7.9. Detailed photophysical studies were conducted on the carboxy-SNAFL-1 system and excited-state prototropic reactions were compared to structurally related derivatives, such as the umbelliferones. Membrane permeant esters, such as diacetates and acetoxymethyl esters have also been prepared. The indicators are spectrally well resolved from calcium indicators such as fura-2 and indo-1 and should be suitable for simultaneous determination of pH and Ca2+ transients.

Background-free, high sensitivity staining of proteins in one- and two-dimensional sodium dodecyl sulfate-polyacrylamide gels using a luminescent ruthenium complex

SYPRO Ruby dye is a permanent stain comprised of ruthenium as part of an organic complex that interacts noncovalently with proteins. SYPRO Ruby Protein Gel Stain provides a sensitive, gentle, fluorescence‐based method for detecting proteins in one‐dimensional and two‐dimensional sodium dodecyl sulfate‐polyacrylamide gels. Proteins are fixed, stained from 3h to overnight and then rinsed in deionized water or dilute methanol/acetic acid solution for 30 min. The stain can be visualized using a wide range of excitation sources commonly used in image analysis systems including a 302 nm UV‐B transilluminator, 473 nm second harmonic generation (SHG) laser, 488 nm argon‐ion laser, 532 nm yttrium‐aluminum‐garnet (YAG) laser, xenon arc lamp, blue fluorescent light bulb or blue light‐emitting diode (LED). The sensitivity of SYPRO Ruby Protein Gel Stain is superior to colloidal Coomassie Brilliant Blue (CBB) stain or monobromobimane labeling and comparable with the highest sensitivity silver or zinc‐imidazole staining procedures available. The linear dynamic range of SYPRO Ruby Protein Gel stain extends over three orders of magnitude, which is vastly superior to silver, zinc‐imidazole, monobromobimane and CBB stain. The fluorescent stain does not contain superfluous chemicals (formaldehyde, glutaraldehyde, Tween‐20) that frequently interfere with peptide identification in mass spectrometry. While peptide mass profiles are severely altered in protein samples prelabeled with monobromobimane, successful identification of proteins by peptide mass profiling using matrix‐assisted laser desorption/ionization mass spectrometry was easily performed after protein detection with SYPRO Ruby Protein Gel stain.

Quantitative Comparison of Long-wavelength Alexa Fluor Dyes to Cy Dyes: Fluorescence of the Dyes and Their Bioconjugates

Amine-reactive N-hydroxysuccinimidyl esters of Alexa Fluor fluorescent dyes with principal absorption maxima at about 555 nm, 633 nm, 647 nm, 660 nm, 680 nm, 700 nm, and 750 nm were conjugated to antibodies and other selected proteins. These conjugates were compared with spectrally similar protein conjugates of the Cy3, Cy5, Cy5.5, Cy7, DY-630, DY-635, DY-680, and Atto 565 dyes. As N-hydroxysuccinimidyl ester dyes, the Alexa Fluor 555 dye was similar to the Cy3 dye, and the Alexa Fluor 647 dye was similar to the Cy5 dye with respect to absorption maxima, emission maxima, Stokes shifts, and extinction coefficients. However, both Alexa Fluor dyes were significantly more resistant to photobleaching than were their Cy dye counterparts. Absorption spectra of protein conjugates prepared from these dyes showed prominent blue-shifted shoulder peaks for conjugates of the Cy dyes but only minor shoulder peaks for conjugates of the Alexa Fluor dyes. The anomalous peaks, previously observed for protein conjugates of the Cy5 dye, are presumably due to the formation of dye aggregates. Absorption of light by the dye aggregates does not result in fluorescence, thereby diminishing the fluorescence of the conjugates. The Alexa Fluor 555 and the Alexa Fluor 647 dyes in protein conjugates exhibited significantly less of this self-quenching, and therefore the protein conjugates of Alexa Fluor dyes were significantly more fluorescent than those of the Cy dyes, especially at high degrees of labeling. The results from our flow cytometry, immunocytochemistry, and immunohistochemistry experiments demonstrate that protein-conjugated, long-wavelength Alexa Fluor dyes have advantages compared to the Cy dyes and other long-wavelength dyes in typical fluorescence-based cell labeling applications.

A novel acidotropic pH indicator and its potential application in labeling acidic organelles of live cells

BACKGROUND Ratio imaging has received intensive attention in the past few decades. The growing potential of ratio imaging is significantly limited, however, by the lack of appropriate fluorescent probes, for acidic organelles in particular. The classic fluorescent dyes (such as fluoresceins, rhodamines and coumarins) are not suitable for studying acidic organelles (such as lysosomes) because their fluorescence is significantly decreased under neutral or acidic conditions. This has motivated us to develop probes that can be used in ratio imaging that are strongly fluorescent even in acidic media. RESULTS The compound 2-(4-pyridyl)-5-((4-(2-dimethylaminoethyl-aminocarbamoyl) methoxy)phenyl)oxazole (PDMPO) was prepared and characterized as a new acidotropic dual-excitation and dual-emission pH indicator. It emits intense yellow fluorescence at lower pH and gives intense blue fluorescence at higher pH. This unique pH-dependent fluorescence property was readily explored to selectively stain lysosomes and to determine the pH of the organelle in an emission-ratio-imaging mode. PDMPO is selectively localized to lysosomes and exhibits a pH-dependent dual excitation and emission. CONCLUSIONS PDMPO selectively labels acidic organelles (such as lysosomes) of live cells and the two distinct emission peaks can be used to monitor the pH fluctuations of live cells in ratio measurements. Additionally, the very large Stokes shift and excellent photostability of PDMPO make the compound an ideal fluorescent acidotropic probe. The unique fluorescence properties of PDMPO might give researchers a new tool with which to study acidic organelles of live cells.

Sensitive determination of cell number using the CyQUANT® cell proliferation assay

We describe here the development and characterization of the CyQUANT cell proliferation assay, a highly sensitive, fluorescence-based microplate assay for determining numbers of cultured cells. The assay employs CyQUANT GR dye, which produces a large fluorescence enhancement upon binding to cellular nucleic acids that can be measured using standard fluorescein excitation and emission wavelengths. The fluorescence emission of the dye-nucleic acid complexes correlated linearly with cell number over a large range using a wide variety of cell types. Under the recommended assay conditions, standard curves were linear (r(2)>0.995), detecting as few as 10-50 cells and as many as 25,000-50,000 cells with a single dye concentration, depending on cell type. Increasing the dye concentration extended the linear range of the assay to 100,000-250,000 cells. Results of cell proliferation and growth inhibition studies with the assay were similar to those obtained in published studies using other standard assays. CyQUANT assay measurements of serum-stimulated cell proliferation correlated well with measurements made using [3H]-thymidine. Also, the assay was used to analyze cellular DNA or RNA content, with the addition of a nuclease digestion step to the protocol. The assay procedure is simple and convenient, with no wash steps, and is readily amenable to automation.

Easily reversible desthiobiotin binding to streptavidin, avidin, and other biotin-binding proteins: uses for protein labeling, detection, and isolation

The high-affinity binding of biotin to avidin, streptavidin, and related proteins has been exploited for decades. However, a disadvantage of the biotin/biotin-binding protein interaction is that it is essentially irreversible under physiological conditions. Desthiobiotin is a biotin analogue that binds less tightly to biotin-binding proteins and is easily displaced by biotin. We synthesized an amine-reactive desthiobiotin derivative for labeling proteins and a desthiobiotin-agarose affinity matrix. Conjugates labeled with desthiobiotin are equivalent to their biotinylated counterparts in cell-staining and antigen-labeling applications. They also bind to streptavidin and other biotin-binding protein-based affinity columns and are recognized by anti-biotin antibodies. Fluorescent streptavidin conjugates saturated with desthiobiotin, but not biotin, bind to a cell-bound biotinylated target without further processing. Streptavidin-based ligands can be gently stripped from desthiobiotin-labeled targets with buffered biotin solutions. Thus, repeated probing with fluorescent streptavidin conjugates followed by enzyme-based detection is possible. In all applications, the desthiobiotin/biotin-binding protein complex is easily dissociated under physiological conditions by either biotin or desthiobiotin. Thus, our desthiobiotin-based reagents and techniques provide some distinct advantages over traditional 2-iminobiotin, monomeric avidin, or other affinity-based techniques.

Rapid and simple single nanogram detection of glycoproteins in polyacrylamide gels and on electroblots.

The fluorescent hydrazide, Pro‐Q Emerald 300 dye, may be conjugated to glycoproteins by a periodic acid Schiff’s (PAS) mechanism. The glycols present in glycoproteins are initially oxidized to aldehydes using periodic acid. The dye then reacts with the aldehydes to generate a highly fluorescent conjugate. Reduction with sodium metabisulfite or sodium borohydride is not required to stabilize the conjugate. Though glycoprotein detection may be performed on transfer membranes, direct detection in gels avoids electroblotting and glycoproteins may be visualized within 2–4 h of electrophoresis. This is substantially more rapid than PAS labeling with digoxigenin hydrazide followed by detection with an antidigoxigenin antibody conjugate of alkaline phosphatase, or PAS labeling with biotin hydrazide followed by detection with horseradish peroxidase or alkaline phosphatase conjugates of streptavidin, which require more than eight hours to complete. Pro‐Q Emerald 300 dye‐labeled gels and blots may be post‐stained with SYPRO Ruby dye, allowing sequential two‐color detection of glycosylated and nonglycosylated proteins. Both fluorophores are excited with mid‐range UV illumination. Pro‐Q Emerald 300 dye maximally emits at 530 nm (green) while SYPRO Ruby dye maximally emits at 610 nm (red). As little as 300 pg of α1‐acid glycoprotein (40% carbohydrate) and 1 ng of glucose oxidase (12% carbohydrate) or avidin (7% carbohydrate) are detectable in gels after staining with Pro‐Q Emerald 300 dye. Besides glycoproteins, as little as 2–4 ng of lipopolysaccharide is detectable in gels using Pro‐Q Emerald 300 dye while 250–1000 ng is required for detection with conventional silver staining. Detection of glycoproteins may be achieved in sodium dodecyl sulfate‐polyacrylamide gels, two‐dimensional gels and on polyvinylidene difluoride membranes.

Synthesis of novel fluorinated coumarins: Excellent UV-light excitable fluorescent dyes

Two new fluorinated fluorescent dyes, 6,8-difluoro-7-hydroxy-4-methylcoumarin (Marina Blue) and 3-carboxy-6,8-difluoro-7-hydroxycoumarin (Pacific Blue), exhibit excellent photophysical properties among a series of novel fluorinated 7-hydroxycoumarins. Most of these fluorinated coumarins have quantum yields (0.63 to 0.89) equal to or higher than that of the parent compound (0.63), which, in combination with their lower pKaS and higher photostability, make them superior fluorescent dyes for use as reporter molecules in biological systems.