Riikka Laitinen

Emerging trends in the stabilization of amorphous drugs

The number of active pharmaceutical substances having high therapeutic potential but low water solubility is constantly increasing, making it difficult to formulate these compounds as oral dosage forms. The solubility and dissolution rate, and thus potentially the bioavailability, of these poorly water-soluble drugs can be increased by the formation of stabilized amorphous forms. Currently, formulation as solid polymer dispersions is the preferred method to enhance drug dissolution and to stabilize the amorphous form of a drug. The purpose of this review is to highlight emerging alternative methods to amorphous polymer dispersions for stabilizing the amorphous form of drugs. First, an overview of the properties and stabilization mechanisms of amorphous forms is provided. Subsequently, formulation approaches such as the preparation of co-amorphous small-molecule mixtures and the use of mesoporous silicon and silica-based carriers are presented as potential means to increase the stability of amorphous pharmaceuticals.

Coamorphous Drug Systems: Enhanced Physical Stability and Dissolution Rate of Indomethacin and Naproxen

One of the challenges in drug development today is that many new drug candidates are poorly water-soluble, and one of the approaches to overcome this problem is to transfer a crystalline drug into its amorphous form, thus increasing dissolution rate and apparent solubility of the compound. In this study, a coamorphous drug/drug combination between the two nonsteroidal anti-inflammatory drugs, naproxen and γ-indomethacin, was prepared and investigated. At molar ratios of 2:1, 1:1 and 1:2, the drugs were quench cooled in order to obtain a coamorphous binary phase. Physical stability was examined at 277.15 and 298.15 K under dry conditions (phosphorus pentoxide) and analyzed with X-ray powder diffraction (XRPD). Intrinsic dissolution testing was carried out to identify dissolution advantages of the coamorphous form over its crystalline counterparts or amorphous indomethacin. Fourier transform infrared spectroscopy (FTIR) was used for analyses at the molecular level to detect potential molecular interactions. Differential scanning calorimetry (DSC) thermograms were employed to assess the glass transition temperatures (T(g)), and the results were compared with predicted T(g)s from the Gordon-Taylor equation. Results showed that naproxen could be made amorphous in combination with indomethacin while this was not possible with naproxen alone. Peak shifts in the FTIR spectra indicated molecular interactions between both drugs, and it is suggested that the two drugs formed a heterodimer. Therefore, samples at the 1:2 and 2:1 ratios showed recrystallization of the excess drug upon storage whereas the 1:1 ratio samples remained amorphous. Intrinsic dissolution testing showed increased dissolution rate of both drugs in the coamorphous form as well as a synchronized release for the 1:1 coamorphous blend. All T(g)s displayed negative deviations from the Gordon-Taylor equation with the 1:1 ratio showing the largest deviation. In a novel approach of predicting the glass transition temperature, the 1:1 drug ratio was inserted as an individual component in the Gordon-Taylor equation with the excess drug representing the second compound. This approach resulted in a good fit to the experimentally determined T(g)s.

Co-amorphous simvastatin and glipizide combinations show improved physical stability without evidence of intermolecular interactions.

The objective of this study was to prepare a co-amorphous drug/drug combination between two BCS class II drugs, simvastatin (SVS) and glipizide (GPZ). This pharmacologically relevant combination of two drugs could produce a promising candidate for formulations intended for combination therapy of metabolic disorders. The co-amorphous SVS-GPZ mixtures (molar ratios 2:1, 1:1 and 1:2) were prepared by mechanical activation (ball milling or cryomilling) and characterized with respect to their thermal properties, possible molecular interactions, dissolution properties and physical stability, and compared to the behaviour of pure amorphous forms and their physical mixtures. It was found that even though a molecular mixture was achieved with all SVS-GPZ mixture ratios, no molecular interactions between the drugs could be detected. By formation of co-amorphous single-phase mixtures, only the dissolution rate of GPZ could be improved. The co-amorphous mixtures showed improved stability compared to the pure amorphous forms and the amorphous physical mixtures. It was concluded that this was attributable to the molecular level mixing of SVS with GPZ upon milling, and GPZ is acting as an anti-plasticizer in these mixtures.

Amino acids as co-amorphous stabilizers for poorly water soluble drugs – Part 1: Preparation, stability and dissolution enhancement

Poor aqueous solubility of an active pharmaceutical ingredient (API) is one of the most pressing problems in pharmaceutical research and development because up to 90% of new API candidates under development are poorly water soluble. These drugs usually have a low and variable oral bioavailability, and therefore an unsatisfactory therapeutic effect. One of the most promising approaches to increase dissolution rate and solubility of these drugs is the conversion of a crystalline form of the drug into its respective amorphous form, usually by incorporation into hydrophilic polymers, forming glass solutions. However, this strategy only led to a small number of marketed products usually because of inadequate physical stability of the drug (crystallization). In this study, we investigated a fundamentally different approach to stabilize the amorphous form of drugs, namely the use of amino acids as small molecular weight excipients that form specific molecular interactions with the drug resulting in co-amorphous forms. The two poorly water soluble drugs carbamazepine and indomethacin were combined with amino acids from the binding sites of the biological receptors of these drugs. Mixtures of drug and the amino acids arginine, phenylalanine, tryptophan and tyrosine were prepared by vibrational ball milling. Solid-state characterization with X-ray powder diffraction (XRPD) and differential scanning calorimetry (DSC) revealed that the various blends could be prepared as homogeneous, single phase co-amorphous formulations indicated by the appearance of an amorphous halo in the XRPD diffractograms and a single glass transition temperature (Tg) in the DSC measurements. In addition, the Tgs of the co-amorphous mixtures were significantly increased over those of the individual drugs. The drugs remained chemically stable during the milling process and the co-amorphous formulations were generally physically stable over at least 6 months at 40 °C under dry conditions. The dissolution rate of all co-amorphous drug-amino acid mixtures was significantly increased over that of the respective crystalline and amorphous pure drugs. Amino acids thus appear as promising excipients to solve challenges connected with the stability and dissolution of amorphous drugs.

Amino acids as co-amorphous stabilizers for poorly water-soluble drugs – Part 2: Molecular interactions

The formation of co-amorphous drug-drug mixtures has proved to be a powerful approach to stabilize the amorphous form and at the same time increase the dissolution of poorly water-soluble drugs. Molecular interactions in these co-amorphous formulations can play a crucial role in stabilization and dissolution enhancement. In this regard, Fourier-transform infrared spectroscopy (FTIR) is a valuable tool to analyze the molecular near range order of the compounds in the co-amorphous mixtures. In this study, several co-amorphous drugs--low molecular weight excipient blends--have been analyzed with FTIR spectroscopy. Molecular interactions of the drugs carbamazepine and indomethacin with the amino acids arginine, phenylalanine, and tryptophan were investigated. The amino acids were chosen from the biological target site of both drugs and prepared as co-amorphous formulations together with the drugs by vibrational ball milling. A detailed analysis of the FTIR spectra of these formulations revealed specific peak shifts in the vibrational modes of functional groups of drug and amino acid, as long as one amino acid from the biological target site was present in the blends. These peak shifts indicate that the drugs formed specific molecular interactions (hydrogen bonding and π-π interactions) with the amino acids. In the drug-amino acid mixtures that contained amino acids which were not present at the biological target site, no such interactions were identified. This study shows the potential of amino acids as small molecular weight excipients in co-amorphous formulations to stabilize the amorphous form of a poorly water-soluble drug through strong and specific molecular interactions with the drug.

A theoretical and spectroscopic study of co-amorphous naproxen and indomethacin

Co-amorphous drug systems were recently introduced as potential drug delivery systems for poorly water soluble drugs in order to overcome problems associated with amorphous materials. The improved physical stability and dissolution of these systems was attributed to molecular interactions between the co-amorphous partners, such as hydrogen bonds. However, molecular level characterization with vibrational spectroscopy of even the amorphous drugs alone presents a significant challenge. This becomes even more complicated when more than one compound is present in the material under investigation. In this study, the co-amorphous drug mixture containing naproxen (NAP) and indomethacin (IND) was investigated using infrared spectroscopy (IR) and quantum mechanical calculations. The structures of both drugs were optimized as monomer, homodimer and heterodimer using density functional theory and used for the calculation of IR spectra. Conformational analysis confirmed that the optimized structures were suitable for the theoretical prediction of the spectra. Vibrational modes from the calculation could be matched with experimentally observed spectra for crystalline and amorphous NAP and IND, and it could be shown that both drugs exist as homodimers in their respective individual amorphous form. With the results from the experimental single amorphous drugs and theoretical homodimers, a detailed analysis of the experimental co-amorphous and theoretical heterodimer spectra was performed and evaluated. It is suggested that NAP and IND exist as heterodimers in the co-amorphous mixture when quench cooled together from the melt in a 1:1 molar ratio.

Refining stability and dissolution rate of amorphous drug formulations

Introduction: Poor aqueous solubility of active pharmaceutical ingredients (APIs) is one of the main challenges in the development of new small molecular drugs. Additionally, the proportion of poorly soluble drugs among new chemical entities is increasing. The transfer of a crystalline drug to its amorphous counterpart is often seen as a potential solution to increase the solubility. However, amorphous systems are physically unstable. Therefore, pharmaceutical formulations scientists need to find ways to stabilise amorphous forms. Areas covered: The use of polymer-based solid dispersions is the most established technique for the stabilisation of amorphous forms, and this review will initially focus on new developments in this field. Additionally, newly discovered formulation approaches will be investigated, including approaches based on the physical restriction of crystallisation and crystal growth and on the interaction of APIs with small molecular compounds rather than polymers. Finally, in situ formation of an amorphous form might be an option to avoid storage problems altogether. Expert opinion: The diversity of poorly soluble APIs formulated in an amorphous drug delivery system will require different approaches for their stabilisation. Thus, increased focus on emerging techniques can be expected and a rational approach to decide the correct formulation is needed.

Intraorally fast-dissolving particles of a poorly soluble drug: Preparation and in vitro characterization

In this study, the dissolution rate of a poorly soluble drug, perphenazine (PPZ) was improved by a solid dispersion technique to permit its usage in intraoral formulations. Dissolution of PPZ (4 mg) in a small liquid volume (3 ml, pH 6.8) within one minute was set as the objective. PVP K30 and PEG 8000 were selected for carriers according to the solubility parameter approach and their 5/1, 1/5 and 1/20 mixtures with PPZ (PPZ/polymer w/w) were prepared by freeze-drying from 0.1 N HCl solutions. The dissolution rate of PPZ was improved with all drug/polymer mixture ratios compared to crystalline or micronized PPZ. A major dissolution rate improvement was seen with 1/5 PPZ/PEG formulation, i.e. PPZ was dissolved completely within one minute. SAXS, DSC and XRPD measurements indicated that solid solutions of amorphous PPZ in amorphous PVP or in partly amorphous PEG were formed. DSC and FTIR studies suggested that PPZ dihydrochloride salt was formed and hydrogen bonding was occurred between PPZ and the polymers. It was concluded that molecular mixing together with salt formation promoted the dissolution of PPZ, especially in the case of the 1/5 PPZ/PEG dispersion, making it a promising candidate for use in intraoral formulations.

Amino Acids as Co-amorphous Excipients for Simvastatin and Glibenclamide: Physical Properties and Stability

Co-amorphous drug mixtures with low-molecular-weight excipients have recently been shown to be a promising approach for stabilization of amorphous drugs and thus to be an alternative to the traditional amorphous solid dispersion approach using polymers. However, the previous studies are limited to a few drugs and amino acids. To facilitate the rational selection of amino acids, the practical importance of the amino acid coming from the biological target site of the drug (and associated intermolecular interactions) needs to be established. In the present study, the formation of co-amorphous systems using cryomilling and combinations of two poorly water-soluble drugs (simvastatin and glibenclamide) with the amino acids aspartic acid, lysine, serine, and threonine was investigated. Solid-state characterization with X-ray powder diffraction, differential scanning calorimetry, and Fourier-transform infrared spectroscopy revealed that the 1:1 molar combinations simvastatin-lysine, glibenclamide-serine, and glibenclamide-threonine and the 1:1:1 molar combination glibenclamide-serine-threonine formed co-amorphous mixtures. These were homogeneous single-phase blends with weak intermolecular interactions in the mixtures. Interestingly, a favorable effect by the excipients on the tautomerism of amorphous glibenclamide in the co-amorphous blends was seen, as the formation of the thermodynamically less stable imidic acid tautomer of glibenclamide was suppressed compared to that of the pure amorphous drug. Furthermore, the co-amorphous mixtures provided a physical stability advantage over the amorphous drugs alone.

Perphenazine solid dispersions for orally fast-disintegrating tablets: physical stability and formulation

Aim: The aim of this study was to prepare an orally fast-disintegrating tablet (FDT) by direct compression, containing a poorly soluble drug (perphenazine, PPZ) formulated as a stable solid dispersion. Methods: The stability studies of the fast dissolving 5/1, 1/5, 1/20 (w/w), PPZ/polyvinylpyrrolidone K30 (PVP) or polyethylene glycol 8000 (PEG)) solid dispersions, and amorphous PPZ were conducted with differential scanning calorimetry, X-ray powder diffraction, Fourier-transform infrared spectroscopy, small-angle X-ray scattering, and dissolution rate studies. Results and discussion: It was found that 1/5 PPZ/PEG was the most stable dispersion under elevated temperature and/or humidity. FDTs containing 60% of mannitol, 15% of calcium silicate, 15% of crospovidone, and 10% of 1/5 PPZ/PEG solid dispersion exhibited fast disintegration times (37 ± 3), sufficient hardness (1.28 ± 0.06 MPa), and fast onset of drug dissolution (34% of PPZ dissolved in 4 minutes), and these properties were found to be retained with storage. Thus, by optimizing the drug/excipient ratio of the solid dispersion and tablet composition, it was possible to produce FDTs that possessed fast disintegration and satisfactory drug dissolution in addition to adequate tensile strength, so that they can be handled and packed normally.