Rikard Emanuelsson

Cross‐Hyperconjugation: An Unexplored Orbital Interaction between π‐Conjugated and Saturated Molecular Segments

Crossing a barrier: Molecules with saturated ER2 units (E=C or Si, R=electron-releasing group) inserted between two π-conjugated segments have electronic and optical properties that resemble those ...

An All-Organic Proton Battery

Rechargeable batteries that use organic matter as the capacity-carrying material have previously been considered a technology for the future. Earlier batteries in which both the anode and cathode consisted of organic material required significant amounts of conductive additives and were often based on metal-ion electrolytes containing Li+ or Na+. However, we have used conducting poly(3,4-ethylenedioxythiophene) (PEDOT), functionalized with anthraquinone (PEDOT-AQ) or benzonquinone (PEDOT-BQ) pendant groups as the negative and positive electrode materials, respectively, to make an all-organic proton battery devoid of metals. The electrolyte consists of a proton donor and acceptor slurry containing substituted pyridinium triflates and the corresponding pyridine base. This slurry allows the 2e-/2H+ quinone/hydroquinone redox reactions while suppressing proton reduction in the battery cell. By using strong (acidic) proton donors, the formal potential of the quinone redox reactions is tuned into the potential region in which the PEDOT backbone is conductive, thus eliminating the need for conducting additives. In this all-organic proton battery cell, PEDOT-AQ and PEDOT-BQ deliver 103 and 120 mAh g-1, which correspond to 78% and 75%, respectively, of the theoretical specific capacity of the materials at an average cell potential of 0.5 V. We show that PEDOT-BQ determines the cycling stability of the device while PEDOT-AQ provides excellent reversibility for at least 1000 cycles. This proof-of-concept shows the feasibility of assembling all-organic proton batteries which require no conductive additives and also reveals where the challenges and opportunities lie on the path to producing plastic batteries.

Investigation of α-phenylnorstatine and α-benzylnorstatine as transition state isostere motifs in the search for new BACE-1 inhibitors.

Inhibition of the BACE-1 protease enzyme has over the recent decade developed into a promising drug strategy for Alzheimer therapy. In this report, more than 20 new BACE-1 protease inhibitors based on α-phenylnorstatine, α-benzylnorstatine, iso-serine, and β-alanine moieties have been prepared. The inhibitors were synthesized by applying Fmoc solid phase methodology and evaluated for their inhibitory properties. The most potent inhibitor, tert-alcohol containing (R)-12 (IC(50)=0.19μM) was co-crystallized in the active site of the BACE-1 protease, furnishing a novel binding mode in which the N-terminal amine makes a hydrogen bond to one of the catalytic aspartic acids.

1,4-Disilacyclohexa-2,5-diene: a molecular building block that allows for remarkably strong neutral cyclic cross-hyperconjugation

2,3,5,6-Tetraethyl-1,4-disilacyclohexa-2,5-dienes with either four chloro (1a), methyl (1b), or trimethylsilyl (TMS) (1c) substituents at the two silicon atoms were examined in an effort to design rigid compounds with strong neutral cross-hyperconjugation between π- and σ-bonded molecular segments arranged into a cycle. Remarkable variations in the lowest electronic excitation energies, lowest ionization energies, and the first oxidation potentials were observed upon change of substituents, as determined by gas phase ultraviolet (UV) absorption spectroscopy, ultraviolet photoelectron spectroscopy (UPS), and cyclic voltammetry. A particularly strong neutral cyclic cross-hyperconjugation was observed in 1c. Its lowest electron binding energy (7.1 eV) is distinctly different from that of 1b (8.5 eV). Molecular orbital analysis reveals a stronger interaction between filled π(CC) and π(SiR2) group orbitals in 1c than in 1a and 1b. The energy shift in the highest occupied molecular orbital is also reflected in the first oxidation potentials as observed in the cyclic voltammograms of the respective compounds (1.47, 0.88, and 0.46 V for 1a, 1b and 1c, respectively). Furthermore, 1,4-disilacyclohexadiene 1c absorbs strongly at 273 nm (4.55 eV), whereas 1a and 1b have no symmetry allowed excitations above 215 nm (below 5.77 eV). Thus, suitably substituted 1,4-disilacyclohexa-2,5-dienes could represent novel building blocks for the design of larger cross-hyperconjugated molecules as alternatives to traditional purely cross-π-conjugated analogues, and could allow for design of molecules with properties that are not accessible to those that are exclusively π-conjugated.

Configuration- and Conformation-Dependent Electronic-Structure Variations in 1,4-Disubstituted Cyclohexanes Enabled by a Carbon-to-Silicon Exchange

Cyclohexane, with its well-defined conformers, could be an ideal force-controlled molecular switch if it were to display substantial differences in electronic and optical properties between its conformers. We utilize σ conjugation in heavier analogues of cyclohexanes (i.e. cyclohexasilanes) and show that 1,4-disubstituted cyclohexasilanes display configuration- and conformation-dependent variations in these properties. Cis- and trans-1,4-bis(trimethylsilylethynyl)cyclohexasilanes display a 0.11 V difference in their oxidation potentials (computed 0.11 V) and a 0.34 eV difference in their lowest UV absorption (computed difference between first excitations 0.07 eV). This is in stark contrast to differences in the corresponding properties of analogous all-carbon cyclohexanes (computed 0.02 V and 0.03 eV, respectively). Moreover, the two chair conformers of the cyclohexasilane trans isomer display large differences in electronic-structure-related properties. This enables computational design of a mechanically force-controlled conductance switch with a calculated single-molecule ON/OFF ratio of 213 at zero-bias voltage.

A versatile route to polythiophenes with functional pendant groups using alkyne chemistry

A new versatile polythiophene building block, 3-(3,4-ethylenedioxythiophene)prop-1-yne (pyEDOT) (3), is prepared from glycidol in four steps in 28% overall yield. pyEDOT features an ethynyl group on its ethylenedioxy bridge, allowing further functionalization by alkyne chemistry. Its usefulness is demonstrated by a series of functionalized polythiophene derivatives that were obtained by pre- and post-electropolymerization transformations, provided by the synthetic ease of the Sonogashira coupling and click chemistry.

Quinone based conducting redox polymers for electrical energy storage

Conducting redox polymers (CRPs) constitute a promising class of materials for the development of organic matter based batteries with the potential to overcome the main limitations connected to this type of rechargeable battery systems including low conductivity and dissolution problems. In this report we show that the potential of quinones can be effectively tuned into the conducting region of polypyrrole (PPy), both in water based solutions and in acetonitrile, which is a prerequisite for profitable combination of the two units. We also present a device where both anode and cathode are made from PPy substituted with different quinone pendant groups and where good rate performance is achieved without any conductivity additives thus providing support for the hypothesized synergetic effect of a conducting polymer backbone and a covalently attached redox active pendant group. This device constitutes, to the best of our knowledge, the first all-CRP based battery reported to date.

Expanding the (cross-)hyperconjugation of 1,4-disilacyclohexa-2,5-dienes to larger monomers and oligomers: a computational investigation

We used density functional theory calculations to examine molecules that can be regarded as expanded 1,4-disilacyclohexa-2,5-dienes as well as oligomers based on these or 1,4-disilacyclohexa-2,5-diene with the aim to identify systems with extended (cross-)hyperconjugation. Among the three “expanded 1,4-disilacyclohexa-2,5-dienes” considered cyclobutadisilole is the most interesting as it has a higher thermodynamic stability than the isomeric 1,6-disilacyclodeca-2,3,4,7,8,9-hexaene and significantly lower first electronic excitation energy than 1,6-disilacyclodeca-2,4,7,9-tetraene. Cyclobutadisilole with trimethylsilyl substituents at Si shows particularly low excitations with the first strong transition at 3.46 eV (358 nm), i.e., ∼1.1 eV lower than in 1,4-disilacyclohexa-2,5-diene. The monomers were connected into oligomers via their Si atoms using bis(dimethylsilanediyl) linkers, and some extended hyperconjugation was revealed. The first allowed UV/Vis excitation in the cyclobutadisilole-based tetramers is calculated at 2.57 eV (482 nm), although the lowering in excitation energies when going from monomer to tetramer is merely ∼0.5 eV and hyperconjugation has modest impact on geometries. Yet, the tetra(cyclobutadisilole) has a significantly lower first allowed excitation when compared to a previously studied tetra(1,4-disilacyclohexadiene) with first excitation at 3.9 eV (318 nm).

A Computational Investigation of the Substituent Effects on Geometric, Electronic, and Optical Properties of Siloles and 1,4-Disilacyclohexa-2,5-dienes

Thirty two differently substituted siloles 1a–1p and 1,4-disilacyclohexa-2,5-dienes 2a–2p were investigated by quantum chemical calculations using the PBE0 hybrid density functional theory (DFT) method. The substituents included σ-electron donating and withdrawing, as well as π-electron donating and withdrawing groups, and their effects when placed at the Si atom(s) or at the C atoms were examined. Focus was placed on geometries, frontier orbital energies and the energies of the first allowed electronic excitations. We analyzed the variation in energies between the orbitals which correspond to HOMO and LUMO for the two parent species, here represented as ΔεHL, motivated by the fact that the first allowed transitions involve excitation between these orbitals. Even though ΔεHL and the excitation energies are lower for siloles than for 1,4-disilacyclohexa-2,5-dienes the latter display significantly larger variations with substitution. The ΔεHL of the siloles vary within 4.57–5.35 eV (ΔΔεHL = 0.78 eV) while for the 1,4-disilacyclohexa-2,5-dienes the range is 5.49–7.15 eV (ΔΔεHL = 1.66 eV). The excitation energy of the first allowed transitions display a moderate variation for siloles (3.60–4.41 eV) whereas the variation for 1,4-disilacyclohexa-2,5-dienes is nearly doubled (4.69–6.21 eV). Cyclobutadisiloles combine the characteristics of siloles and 1,4-disilacyclohexa-2,5-diene by having even lower excitation energies than siloles yet also extensive variation in excitation energies to substitution of 1,4-disilacyclohexa-2,5-dienes (3.47–4.77 eV, variation of 1.30 eV).