Rint P. Sijbesma

Supramolecular polymer materials; chain extension of telechelic polymers using a reactive hydrogen bonding synthon

Functionalizing the termini of low-molecular-weight telechelic polymers with strongly associating hydrogen bonding units (see Figure) results in a new set of supramolecular materials, as reported here. These materials possess the unique combination of polymer-like properties at room temperature and monomer-like properties at elevated temperatures.

Helical self-assembled polymers from cooperative stacking of hydrogen-bonded pairs.

The double helix of DNA epitomizes this molecules ability to self-assemble in aqueous solutions into a complex chiral structure using hydrogen bonding and hydrophobic interactions. Non-covalently interacting molecules in organic solvents are used to design systems that similarly form controlled architectures. Peripheral chiral centres in assemblies and chiral side chains attached to a polymer backbone have been shown to induce chirality at the supramolecular level, and highly ordered structures stable in water are also known. However, it remains difficult to rationally exploit non-covalent interactions for the formation of chiral assemblies that are stable in water, where solvent molecules can compete effectively for hydrogen bonds. Here we describe a general strategy for the design of functionalized monomer units and their association in either water or alkanes into non-covalently linked polymeric structures with controlled helicity and chain length. The monomers consist of bifunctionalized ureidotriazine units connected by a spacer and carrying solubilizing chains at the periphery. This design allows for dimerization through self-complementary quadruple hydrogen bonding between the units and solvophobically induced stacking of the dimers into columnar polymeric architectures, whose structure and helicity can be adjusted by tuning the nature of the solubilizing side chains.

White-Light Emitting Hydrogen-Bonded Supramolecular Copolymers Based on π-Conjugated Oligomers

Three different pi-conjugated oligomers (a blue-emitting oligofluorene, a green-emitting oligo(phenylene vinylene), and a red-emitting perylene bisimide) have been functionalized with self-complementary quadruple hydrogen bonding ureidopyrimidinone (UPy) units at both ends. The molecules self-assemble in solution and in the bulk, forming supramolecular polymers. When mixed together in solution, random noncovalent copolymers are formed that contain all three types of chromophores, resulting in energy transfer upon excitation of the oligofluorene energy donor. At a certain mixing ratio, a white emissive supramolecular polymer can be created in solution. In contrast to their unfunctionalized counterparts, bis-UPy-chromophores can easily be deposited as smooth thin films on surfaces by spin coating. No phase separation is observed in these films, and energy transfer is much more efficient than in solution, giving rise to white fluorescence at much lower ratios of energy acceptor to donor. Light emitting diodes based on these supramolecular polymers have been prepared from all three types of pure materials, yielding blue, green, and red devices, respectively. At appropriate mixing ratios of these three compounds, white electroluminescence is observed. This approach yields a toolbox of molecules that can be easily used to construct pi-conjugated supramolecular polymers with a variety of compositions, high solution viscosities, and tuneable emission colors.

Mechanically induced chemiluminescence from polymers incorporating a 1,2-dioxetane unit in the main chain

Nature uses mechanochemical transduction processes to achieve diverse and vital functions, such as hearing, cellular adhesion and gating of ion channels. One fascinating example of biological mechanotransduction is the emission of light on mechanical stimulation. However, molecular-level transduction of force into luminescence in a synthetic system remains a challenge. Here, we show that bis(adamantyl)-1,2-dioxetane emits visible light when force is applied to a polymer chain or network in which this unit is incorporated. Bright-blue luminescence was observed on sonication of solutions of dioxetane-containing linear polymers and on the straining of polymer networks with dioxetane crosslinkers. Light is emitted from the adamantanone-excited state that forms on opening of the four-membered dioxetane ring. Increased sensitivity and colour tuning were achieved by energy transfer to suitable acceptors. High spatial and temporal resolutions highlight the potential to study the failure of polymeric materials in unprecedented detail.

Self‐Complementarity Achieved through Quadruple Hydrogen Bonding

Highly stable dimers are formed in solution and in the solid state by a class of readily synthesized, self-complementary building blocks for supramolecular chemistry, which associate through a donor-acceptor-donor-acceptor array of four hydrogen-bonding sites. An additional intramolecular hydrogen bond in the compound whose crystal structure is shown on the right preorganizes the molecule for dimerization.

Toughening elastomers with sacrificial bonds and watching them break

Toughening Up Elastomers Elastomers are soft polymer materials widely used in industry and daily life. Inspired by recent work on double-network hydrogels, Ducrot et al. (p. 186; see the Perspective by Gong) designed interpenetrated network elastomers that contained isotropically prestretched chains as the first network. Double- and triple-network structures yielded elastomers with very high strength and toughness in comparison with the corresponding single networks. Network elastomers based on hydrogel structures show increased toughness through the incorporation of sacrificial bonds. [Also see Perspective by Gong] Elastomers are widely used because of their large-strain reversible deformability. Most unfilled elastomers suffer from a poor mechanical strength, which limits their use. Using sacrificial bonds, we show how brittle, unfilled elastomers can be strongly reinforced in stiffness and toughness (up to 4 megapascals and 9 kilojoules per square meter) by introducing a variable proportion of isotropically prestretched chains that can break and dissipate energy before the material fails. Chemoluminescent cross-linking molecules, which emit light as they break, map in real time where and when many of these internal bonds break ahead of a propagating crack. The simple methodology that we use to introduce sacrificial bonds, combined with the mapping of where bonds break, has the potential to stimulate the development of new classes of unfilled tough elastomers and better molecular models of the fracture of soft materials.

Supramolecular polymers at work

Abstract Sophisticated polymeric materials with ‘responsive’ properties are beginning to reach the market. The use of reversible, noncovalent interactions is a recurring design principle for responsive materials. Now, recently developed hydrogen-bonding units allow this design principle to be taken to its extreme. Supramolecular polymers, where hydrogen bonds are the only force keeping the monomers together, form materials whose (mechanical) properties respond strongly to a change in temperature or solvent. In this review, we describe the developments that have led to hydrogen-bonded supramolecular polymers and discuss the use of these materials in advanced applications.

Hierarchical formation of helical supramolecular polymers via stacking of hydrogen-bonded pairs in water

Bifunctional ureido-s-triazines provided with penta(ethylene oxide) side chains are able to self assemble in water, leading to helical columns via cooperative stacking of the hydrogen-bonded pairs (DADA array). Monofunctional ureido-s-triazines do not form such helical architectures. The presence of a linker, covalently connecting the two ureido-s-triazine units, is essential as it generates a high local concentration of aromatic units, favorable for stacking interactions. This hydrophobic stacking of the aromatic units occurs at concentrations as low as 5⋅10−6 M and can be visualized by using fluorescence spectroscopy. The stacking generates a hydrophobic microenvironment that allows intermolecular hydrogen bonding to occur at higher concentrations because the hydrogen bonds are shielded from competitive hydrogen bonding with water. This hierarchical process results in the formation of a helical self-assembled polymer in water at concentrations above 10−4 M. Chiral side chains attached to the ureido-s-triazine units bias the helicity of these columns as concluded from CD spectroscopy and “Sergeants and Soldiers” experiments.

Hierarchical self-assembly of columnar aggregates

Biology often uses hierarchical self-assembly to produce complex functional structures from smaller components. At each level of this stepwise process, non-covalent interactions bring together the subunits of a lower level of complexity, using the information encoded in their structures. Applying this approach to synthetic systems represents a formidable challenge, because it requires a high degree of command of non-covalent interactions. In this tutorial review, recent developments in the hierarchical self-assembly of discrete columnar aggregates are discussed.

Highly efficient mechanochemical scission of silver-carbene coordination polymers

The ultrasound-induced scission of silver carbene coordination complexes with polytetrahydrofuran-functionalized N-heterocyclic carbene ligands is reported. In solution, scission is very efficient, with complete conversion within 10 min when the polymers have a molecular weight of 6.7 kDa. The mechanochemical origin of the scission is supported by the molecular weight dependence of the scission rate and by the low reactivity of the silver complex with low molecular weight ligands. The mechanochemical process at room temperature is much faster than thermal scission at 60 degreesC, which has a conversion of 30% in 18 h.