Ritimukta Sarangi

Mononuclear Metal–O2 Complexes Bearing Macrocyclic N-Tetramethylated Cyclam Ligands

Metalloenzymes activate dioxygen to carry out a variety of biological reactions, including the biotransformation of naturally occurring molecules, oxidative metabolism of xenobiotics, and oxidative phosphorylation. The dioxygen activation at the catalytic sites of the enzymes occurs through several steps, such as the binding of O(2) at a reduced metal center, the generation of metal-superoxo and -peroxo species, and the O-O bond cleavage of metal-hydroperoxo complexes to form high-valent metal-oxo oxidants. Because these mononuclear metal-dioxygen (M-O(2)) adducts are implicated as key intermediates in dioxygen activation reactions catalyzed by metalloenzymes, studies of the structural and spectroscopic properties and reactivities of synthetic biomimetic analogues of these species have aided our understanding of their biological chemistry. One particularly versatile class of biomimetic coordination complexes for studying dioxygen activation by metal complexes is M-O(2) complexes bearing the macrocyclic N-tetramethylated cyclam (TMC) ligand. This Account describes the synthesis, structural and spectroscopic characterization, and reactivity studies of M-O(2) complexes bearing tetraazamacrocyclic n-TMC ligands, where M ═ Cr, Mn, Fe, Co, and Ni and n = 12, 13, and 14, based on recent results from our laboratory. We have used various spectroscopic techniques, including resonance Raman and X-ray absorption spectroscopy, and density functional theory (DFT) calculations to characterize several novel metal-O(2) complexes. Notably, X-ray crystal structures had shown that these complexes are end-on metal-superoxo and side-on metal-peroxo species. The metal ions and the ring size of the macrocyclic TMC ligands control the geometric and electronic structures of the metal-O(2) complexes, resulting in the end-on metal-superoxo versus side-on metal-peroxo structures. Reactivity studies performed with the isolated metal-superoxo complexes reveal that they can conduct electrophilic reactions such as oxygen atom transfer and C-H bond activation of organic substrates. The metal-peroxo complexes are active oxidants in nucleophilic reactions, such as aldehyde deformylation. We also demonstrate a complete intermolecular O(2)-transfer from metal(III)-peroxo complexes to a Mn(II) complex. The results presented in this Account show the significance of metal ions and supporting ligands in tuning the geometric and electronic structures and reactivities of the metal-O(2) intermediates that are relevant in biology and in biomimetic reactions.

Geometric and Electronic Structure and Reactivity of a Mononuclear “Side-On” Nickel(III)-Peroxo Complex

Metal-dioxygen adducts, such as metal-superoxo and -peroxo species, are key intermediates often detected in the catalytic cycles of dioxygen activation by metalloenzymes and biomimetic compounds. The synthesis and spectroscopic characterization of an end-on nickel(II)-superoxo complex with a 14-membered macrocyclic ligand was reported previously. Here we report the isolation, spectroscopic characterization, and high-resolution crystal structure of a mononuclear side-on nickel(III)-peroxo complex with a 12-membered macrocyclic ligand, [Ni(12-TMC)(O(2))](+) (1) (12-TMC = 1,4,7,10-tetramethyl-1,4,7,10-tetraazacyclododecane). Different from the end-on Ni(II)-superoxo complex, the Ni(III)-peroxo complex is not reactive in electrophilic reactions, but is capable of conducting nucleophilic reactions. The Ni(III)-peroxo complex transfers the bound dioxygen to manganese(II) complexes, thus affording the corresponding nickel(II) and manganese(III)-peroxo complexes. The present results demonstrate the significance of supporting ligands in tuning the geometric and electronic structures and reactivities of metal-O(2) intermediates that have been shown to have biological as well as synthetic usefulness in biomimetic reactions.

Synthesis, Structural and Spectroscopic Characterization, and Reactivities of Mononuclear Cobalt(III)-Peroxo Complexes

Metal-dioxygen adducts are key intermediates detected in the catalytic cycles of dioxygen activation by metalloenzymes and biomimetic compounds. In this study, mononuclear cobalt(III)-peroxo complexes bearing tetraazamacrocyclic ligands, [Co(12-TMC)(O(2))](+) and [Co(13-TMC)(O(2))](+), were synthesized by reacting [Co(12-TMC)(CH(3)CN)](2+) and [Co(13-TMC)(CH(3)CN)](2+), respectively, with H(2)O(2) in the presence of triethylamine. The mononuclear cobalt(III)-peroxo intermediates were isolated and characterized by various spectroscopic techniques and X-ray crystallography, and the structural and spectroscopic characterization demonstrated unambiguously that the peroxo ligand is bound in a side-on η(2) fashion. The O-O bond stretching frequency of [Co(12-TMC)(O(2))](+) and [Co(13-TMC)(O(2))](+) was determined to be 902 cm(-1) by resonance Raman spectroscopy. The structural properties of the CoO(2) core in both complexes are nearly identical; the O-O bond distances of [Co(12-TMC)(O(2))](+) and [Co(13-TMC)(O(2))](+) were 1.4389(17) Å and 1.438(6) Å, respectively. The cobalt(III)-peroxo complexes showed reactivities in the oxidation of aldehydes and O(2)-transfer reactions. In the aldehyde oxidation reactions, the nucleophilic reactivity of the cobalt-peroxo complexes was significantly dependent on the ring size of the macrocyclic ligands, with the reactivity of [Co(13-TMC)(O(2))](+) > [Co(12-TMC)(O(2))](+). In the O(2)-transfer reactions, the cobalt(III)-peroxo complexes transferred the bound peroxo group to a manganese(II) complex, affording the corresponding cobalt(II) and manganese(III)-peroxo complexes. The reactivity of the cobalt-peroxo complexes in O(2)-transfer was also significantly dependent on the ring size of tetraazamacrocycles, and the reactivity order in the O(2)-transfer reactions was the same as that observed in the aldehyde oxidation reactions.

The two oxidized forms of the trinuclear Cu cluster in the multicopper oxidases and mechanism for the decay of the native intermediate

Multicopper oxidases (MCOs) catalyze the 4e− reduction of O2 to H2O. The reaction of the fully reduced enzyme with O2 generates the native intermediate (NI), which undergoes a slow decay to the resting enzyme in the absence of substrate. NI is a fully oxidized form, but its spectral features are very different from those of the resting form (also fully oxidized), because the type 2 and the coupled-binuclear type 3 Cu centers in the O2-reducing trinuclear Cu cluster site are isolated in the resting enzyme, whereas these are all bridged by a μ3-oxo ligand in NI. Notably, the one azide-bound NI (NIAz) exhibits spectral features very similar to those of NI, in which the μ3-oxo ligand in NI has been replaced by a μ3-bridged azide. Comparison of the spectral features of NI and NIAz, combined with density functional theory (DFT) calculations, allows refinement of the NI structure. The decay of NI to the resting enzyme proceeds via successive proton-assisted steps, whereas the rate-limiting step involves structural rearrangement of the μ3-oxo-bridge from inside to outside the cluster. This phenomenon is consistent with the slow rate of NI decay that uncouples the resting enzyme from the catalytic cycle, leaving NI as the catalytically relevant fully oxidized form of the MCO active site. The all-bridged structure of NI would facilitate electron transfer to all three Cu centers of the trinuclear cluster for rapid proton-coupled reduction of NI to the fully reduced form for catalytic turnover.

Structure and dynamics of a primordial catalytic fold generated by in vitro evolution

Engineering functional protein scaffolds capable of carrying out chemical catalysis is a major challenge in enzyme design. Starting from a non-catalytic protein scaffold, we recently generated a novel RNA ligase by in vitro directed evolution. This artificial enzyme lost its original fold and adopted an entirely novel structure with dramatically enhanced conformational dynamics, demonstrating that a primordial fold with suitable flexibility is sufficient to carry out enzymatic function.

Quantitative X-ray absorption and emission spectroscopies: electronic structure elucidation of Cu2S and CuS

The electronic structures of Cu2S and CuS have been under intense scrutiny, with the aim of understanding the relationship between their electronic structures and commercially important physical properties. Here, X-ray absorption and emission spectroscopic data have been analyzed using a quantitative, molecular orbital (MO) based approach to understand the electronic structure of these two complex systems. Cu2S is shown to have a significant amount of Cu2+ sites and therefore Cu0 centers. The presence of low-valent Cu is correlated with the electrical conductivity of Cu2S, especially at high temperatures. CuS is shown to have tetrahedral Cu2+ and trigonal Cu1+ sites, with crystal planes that have alternating high and low charge on the Cu centers. These alternating charges may contribute to internal energy transitions required for photoluminescence properties. The in-depth electronic structure solutions presented here not only solve a complicated much-debated problem, but also demonstrate the strength of quantitative MO based approach to X-ray spectroscopies.

Redox-inactive metal ions modulate the reactivity and oxygen release of mononuclear non-haem iron( III )–peroxo complexes

Redox-inactive metal ions that function as Lewis acids play pivotal roles in modulating the reactivity of oxygen-containing metal complexes and metalloenzymes, such as the oxygen-evolving complex in photosystem II and its small-molecule mimics. Here we report the synthesis and characterization of non-haem iron(III)–peroxo complexes that bind redox-inactive metal ions, (TMC)FeIII–(μ,η2:η2-O2)–Mn+ (Mn+ = Sr2+, Ca2+, Zn2+, Lu3+, Y3+ and Sc3+; TMC, 1,4,8,11-tetramethyl-1,4,8,11-tetraazacyclotetradecane). We demonstrate that the Ca2+ and Sr2+ complexes showed similar electrochemical properties and reactivities in one-electron oxidation or reduction reactions. However, the properties and reactivities of complexes formed with stronger Lewis acidities were found to be markedly different. Complexes that contain Ca2+ or Sr2+ ions were oxidized by an electron acceptor to release O2, whereas the release of O2 did not occur for complexes that bind stronger Lewis acids. We discuss these results in the light of the functional role of the Ca2+ ion in the oxidation of water to dioxygen by the oxygen-evolving complex. Non-haem iron(III)-peroxo complexes that bind redox-inactive metal ions are synthesized to investigate the role of the Ca2+ ion in the oxidation of water to dioxygen in photosystem II. The electrochemical properties and reactions of these compounds with an electron donor and an acceptor are found to be markedly dependent on the Lewis acidity of redox-inactive metal ions.

Spectroscopic Studies of Perturbed T1 Cu Sites in the Multicopper Oxidases Saccharomyces Cerevisiae Fet3p And Rhus Vernicifera Laccase: Allosteric Coupling Between the T1 And Trinuclear Cu Sites

The multicopper oxidases catalyze the 4e- reduction of O2 to H2O coupled to the 1e- oxidation of 4 equiv of substrate. This activity requires four Cu atoms, including T1, T2, and coupled binuclear T3 sites. The T2 and T3 sites form a trinuclear cluster (TNC) where O2 is reduced. The T1 is coupled to the TNC through a T1-Cys-His-T3 electron transfer (ET) pathway. In this study the two T3 Cu coordinating His residues which lie in this pathway in Fet3 have been mutated, H483Q, H483C, H485Q, and H485C, to study how perturbation at the TNC impacts the T1 Cu site. Spectroscopic methods, in particular resonance Raman (rR), show that the change from His to Gln to Cys increases the covalency of the T1 Cu-S Cys bond and decreases its redox potential. This study of T1-TNC interactions is then extended to Rhus vernicifera laccase where a number of well-defined species including the catalytically relevant native intermediate (NI) can be trapped for spectroscopic study. The T1 Cu-S covalency and potential do not change in these species relative to resting oxidized enzyme, but interestingly the differences in the structure of the TNC in these species do lead to changes in the T1 Cu rR spectrum. This helps to confirm that vibrations in the cysteine side chain of the T1 Cu site and the protein backbone couple to the Cu-S vibration. These changes in the side chain and backbone provide a possible mechanism for regulating intramolecular T1 to TNC ET in NI and partially reduced enzyme forms for efficient turnover.

Perturbations to the Geometric and Electronic Structure of the CuA Site: Factors that Influence Delocalization and Their Contributions to Electron Transfer

Using a combination of electronic spectroscopies and DFT calculations, the effect of pH perturbation on the geometric and electronic structure of the CuA site has been defined. Descriptions are developed for high pH (pH = 7) and low pH (pH = 4) forms of CuA azurin and its H120A mutant which address the discrepancies concerning the extent of delocalization indicated by multifrequency EPR and ENDOR data (J. Am. Chem. Soc. 2005, 127, 7274; Biophys. J. 2002, 82, 2758). Our resonance Raman and MCD spectra demonstrate that the low pH and H120A mutant forms are essentially identical and are the perturbed forms of the completely delocalized high pH CuA site. However, in going from high pH to low pH, a seven-line hyperfine coupling pattern associated with complete delocalization of the electron (S = 1/2) over two Cu coppers (I(Cu) = 3/2) changes into a four-line pattern reflecting apparent localization. DFT calculations show that the unpaired electron is delocalized in the low pH form and reveal that its four-line hyperfine pattern results from the large EPR spectral effects of approximately 1% 4s orbital contribution of one Cu to the ground-state spin wave function upon protonative loss of its His ligand. The contribution of the Cu-Cu interaction to electron delocalization in this low symmetry protein site is evaluated, and the possible functional significance of the pH-dependent transition in regulating proton-coupled electron transfer in cytochrome c oxidase is discussed.

Mononuclear nickel(II)-superoxo and nickel(III)-peroxo complexes bearing a common macrocyclic TMC ligand

Mononuclear metal-dioxygen adducts, such as metal-superoxo and -peroxo species, are generated as key intermediates in the catalytic cycles of dioxygen activation by heme and non-heme metalloenzymes. We have shown recently that the geometric and electronic structure of the Ni-O2 core in [Ni(n-TMC)(O2)]+ (n = 12 and 14) varies depending on the ring size of the supporting TMC ligand. In this study, mononuclear Ni(II)-superoxo and Ni(III)-peroxo complexes bearing a common macrocylic 13-TMC ligand, such as [NiII(13-TMC)(O2)]+ and [NiIII(13-TMC)(O2)]+, were synthesized in the reaction of [NiII(13-TMC)(CH3CN)]2+ and H2O2 in the presence of tetramethylammonium hydroxide (TMAH) and triethylamine (TEA), respectively. The Ni(II)-superoxo and Ni(III)-peroxo complexes bearing the common 13-TMC ligand were successfully characterized by various spectroscopic methods, X-ray crystallography, and DFT calculations. Based on the combined experimental and theoretical studies, we conclude that the superoxo ligand in [NiII(13-TMC)(O2)]+ is bound in an end-on fashion to the nickel(II) center, whereas the peroxo ligand in [NiIII(13-TMC)(O2)]+ is bound in a side-on fashion to the nickel(III) center. Reactivity studies performed with the Ni(II)-superoxo and Ni(III)-peroxo complexes toward organic substrates reveal that the former possesses an electrophilic character, whereas the latter is an active oxidant in nucleophilic reaction.