Rob Ameloot
Katholieke Universiteit Leuven
Network
Latest external collaboration on country level. Dive into details by clicking on the dots.
Publication
Featured researches published by Rob Ameloot.
Nature Chemistry | 2011
Rob Ameloot; Frederik Vermoortele; Wim Vanhove; Maarten B. J. Roeffaers; Bert F. Sels; Dirk E. De Vos
Metal–organic frameworks (MOFs) are a class of crystalline materials that consist of metal ions and organic ligands linked together by coordination bonds. Because of their porosity and the possibility of combining large surface areas with pore characteristics that can be tailored, these solids show great promise for a wide range of applications. Although most applications currently under investigation are based on powdered solids, developing synthetic methods to prepare defect-free MOF layers will also enable applications based on selective permeation. Here, we demonstrate how the intrinsically hybrid nature of MOFs enables the self-completing growth of thin MOF layers. Moreover, these layers can be shaped as hollow capsules that demonstrate selective permeability directly related to the micropore size of the MOF crystallites forming the capsule wall. Such capsules effectively entrap guest species, and, in the future, could be applied in the development of selective microreactors containing molecular catalysts. The intrinsically hybrid nature of metal–organic frameworks (MOFs) — microporous crystalline solids composed of metal ions and organic ligands — has been exploited to grow thin MOF films at the aqueous–organic interface of a biphasic reaction mixture. These materials exhibit selective permeability and can also be obtained as hollow capsules that have potential as microreactors.
Angewandte Chemie | 2012
Frederik Vermoortele; Matthias Vandichel; Ben Van de Voorde; Rob Ameloot; Michel Waroquier; Veronique Van Speybroeck; Dirk E. De Vos
Functionalized linkers can greatly increase the activity of metal-organic framework (MOF) catalysts with coordinatively unsaturated sites. A clear linear free-energy relationship (LFER) was found between Hammett σ(m) values of the linker substituents X and the rate k(X) of a carbonyl-ene reaction. This is the first LFER ever observed for MOF catalysts. A 56-fold increase in rate was found when the substituent is a nitro group.
Journal of the American Chemical Society | 2013
Katrien G. M. Laurier; Frederik Vermoortele; Rob Ameloot; Dirk E. De Vos; Johan Hofkens; Maarten B. J. Roeffaers
Herein, a new group of visible light photocatalysts is described. Iron(III) oxides could be promising visible light photocatalysts because of their small band gap enabling visible light excitation. However, the high electron-hole recombination rate limits the yield of highly oxidizing species. This can be overcome by reducing the particle dimensions. In this study, metal-organic frameworks (MOFs), containing Fe3-μ3-oxo clusters, are proposed as visible light photocatalysts. Their photocatalytic performance is tested and proven via the degradation of Rhodamine 6G in aqueous solution. For the first time, the remarkable photocatalytic efficiency of such Fe(III)-based MOFs under visible light illumination (350 up to 850 nm) is shown.
Advanced Materials | 2010
Rob Ameloot; Elena Gobechiya; Hiroshi Uji-i; Johan A. Martens; Johan Hofkens; Luc Alaerts; Bert F. Sels; Dirk E. De Vos
[*] Prof. D. E. De Vos, R. Ameloot, Dr. E. Gobechiya, Prof. J. A. Martens, Dr. L. Alaerts, Prof. B. F. Sels Department of Microbial and Molecular Systems Center for Surface Chemistry and Catalysis Katholieke Universiteit Leuven Kasteelpark Arenberg 23, B-3001 Leuven (Belgium) E-mail: [email protected] Dr. H. Uji-i, Prof. J. Hofkens Department of Chemistry Katholieke Universiteit Leuven Celestijnenlaan 200F, B-3001 Leuven (Belgium)
Angewandte Chemie | 2009
Maarten B. J. Roeffaers; Gert De Cremer; Julien Libeert; Rob Ameloot; Peter Dedecker; Anton-Jan Bons; M. Bückins; Johan A. Martens; Bert F. Sels; Dirk E. De Vos; Johan Hofkens
For almost a century, heterogeneous catalysts have been at the heart of countless industrial chemical processes, but their operation at the molecular level is generally much less understood than that of homogeneous catalysts or enzymes. The principal reason is that despite the macroscopic dimensions of solid catalyst particles, their activity seems to be governed by compositional heterogeneities and structural features at the nanoscale. Progress in understanding heterogeneous catalysis thus requires that the nanoscale compositional and structural data be linked with local catalytic activity data, recorded in the same small spatial domains and under in situ reaction conditions. Light microscopy is a recent addition to the toolbox for in situ study of solid catalytic materials. It combines high temporal resolution and sensitivity with considerable specificity in distinguishing reaction products from reagents. However, lens-based microscopes are subjected to light diffraction which limits the optical resolution to 250 nm in the image plane. This resolution is far too limited to resolve the nanosized domains on solid catalysts. Nanometer-accurate localization of single emitters can be achieved by fitting a Gaussian distribution function to the intensity of the observed fluorescence spot (point-spread function, PSF). This method has been used to map out diffusion pathways in mesoporous or clay materials under highly dilute conditions. However, for more concentrated systems, several molecules simultaneously located within a diffraction-limited area cannot be distinguished. Separating the emission of the different fluorescent labels in time, for example by selective photoactivation, solves the problem for imaging of static systems, 13–18] but not when looking at the dynamics of a working catalyst. Herein, we used single catalytic conversions of small fluorogenic reactants, which occurred stochastically on the densely packed active sites of the catalyst, to reconstruct diffraction-unlimited reactivity maps of catalyst particles. As successive catalytic reactions do not overlap in time, one can precisely determine the location of reaction sites that show turnovers at different moments in time, even if the distance between them is only 10 nm (or less, depending on the signal-to-noise ratio), and reconstruct images of catalytically active zones with super-resolution. Although fluorogenic substrates are widely used in singlemolecule enzymology, so far only a few studies have reported single-turnover counting using fluorescence microscopy on solid chemocatalysts. 24, 25] Such studies typically use large polycyclic substrates, which cannot enter the micropores of many heterogeneous catalysts. Hence, similar experiments on microporous materials critically depend on identifying a small reagent that is converted to a product detectable at the single-molecule level. Surprisingly, furfuryl alcohol is such a reagent, and it appears that after acid-catalyzed reaction (see the Supporting Information), the pore-entrapped products are sufficiently fluorescent to be individually observed using a standard microscope equipped with a single excitation source (532 nm diode laser) and sensitive CCD camera (for experimental details, see the Supporting Information). We refer to this novel high-resolution reconstruction method based on catalytic conversion of fluorogenic substrates as NASCA microscopy, or nanometer accuracy by stochastic catalytic reactions microscopy. Figure 1a and b show the concept of NASCA microscopy and a 2D fluorescence intensity image of individual product molecules formed by an acid zeolite crystal, respectively. The fluorescence intensity plot of Figure 1c proves how well the intensity of the individual product molecules allows them to be distinguished from background signals, caused by scatter[*] Dr. M. B. J. Roeffaers, Dr. P. Dedecker, Prof. Dr. J. Hofkens Department of Chemistry, Katholieke Universiteit Leuven Celestijnenlaan 200F, 3001 Heverlee (Belgium) Fax: (+ 32)163-2799 E-mail: [email protected]
Journal of the American Chemical Society | 2010
Michael Maes; Luc Alaerts; Frederik Vermoortele; Rob Ameloot; Sarah Couck; Vincent Finsy; Joeri F. M. Denayer; Dirk E. De Vos
This work studies the liquid-phase separation of the aliphatic C(5)-diolefins, mono-olefins, and paraffins, a typical feed produced by a steam cracker, with a focus on the seldomly studied separation of the C(5)-diolefin isomers isoprene, trans-piperylene, and cis-piperylene. Three adsorbents are compared: the metal-organic framework MIL-96, which is an aluminum 1,3,5-benzenetricarboxylate, and two zeolites with CHA and LTA topology. All three materials have spacious cages that are accessible via narrow cage windows with a diameter of less than 0.5 nm. The mechanisms determining adsorption selectivities on the various materials are investigated. Within the diolefin fraction, MIL-96 and chabazite preferentially adsorb trans-piperylene from a mixture containing all three C(5)-diolefin isomers with high separation factors and a higher capacity compared to the reference zeolite 5A due to a more efficient packing of the trans isomer in the pores. Additionally, chabazite is able to separate cis-piperylene and isoprene based on size exclusion of the branched isomer. This makes chabazite suitable for separating all three diolefin isomers. Its use in separating linear from branched mono-olefins and paraffins is addressed as well. Furthermore, MIL-96 is the only material capable of separating all three diolefin isomers from C(5)-mono-olefins and paraffins. Finally, the MOF [Cu(3)(BTC)(2)] (BTC = benzene-1,3,5-tricarboxylate) is shown to be able to separate C(5)-olefins from paraffins. On the basis of these observations, a flow scheme can be devised in which the C(5)-fraction can be completely separated using a combination of MOFs and zeolites.
Nature Materials | 2016
Ivo Stassen; Mark J. Styles; Gianluca Grenci; Hans Van Gorp; Willem Vanderlinden; Steven De Feyter; Paolo Falcaro; Dirk E. De Vos; Philippe M. Vereecken; Rob Ameloot
Integrating metal-organic frameworks (MOFs) in microelectronics has disruptive potential because of the unique properties of these microporous crystalline materials. Suitable film deposition methods are crucial to leverage MOFs in this field. Conventional solvent-based procedures, typically adapted from powder preparation routes, are incompatible with nanofabrication because of corrosion and contamination risks. We demonstrate a chemical vapour deposition process (MOF-CVD) that enables high-quality films of ZIF-8, a prototypical MOF material, with a uniform and controlled thickness, even on high-aspect-ratio features. Furthermore, we demonstrate how MOF-CVD enables previously inaccessible routes such as lift-off patterning and depositing MOF films on fragile features. The compatibility of MOF-CVD with existing infrastructure, both in research and production facilities, will greatly facilitate MOF integration in microelectronics. MOF-CVD is the first vapour-phase deposition method for any type of microporous crystalline network solid and marks a milestone in processing such materials.
Chemical Communications | 2012
Alexander Sachse; Rob Ameloot; Bernard Coq; François Fajula; Benoı̂t Coasne; Dirk E. De Vos; Anne Galarneau
The metal-organic framework Cu-BTC has been successfully synthesized as nanoparticles inside the mesopores of silica monoliths featuring a homogeneous macropore network enabling the use of Cu-BTC for continuous flow applications in liquid phase with low pressure drop. High productivity was reached with this catalyst for the Friedländer reaction.
Journal of the American Chemical Society | 2008
Maarten B. J. Roeffaers; Rob Ameloot; Mukulesh Baruah; Hiroshi Uji-i; Metin Bulut; Gert De Cremer; Ulrich Müller; Pierre A. Jacobs; Johan Hofkens; Bert F. Sels; Dirk E. De Vos
Understanding the internal structure of ZSM-5 crystallites is essential for improving catalyst performance. In this work, a combination of fluorescence microscopy, AFM, SEM, and optical observations is employed to study intergrowth phenomena and pore accessibility in a set of five ZSM-5 samples with different crystal morphologies. An amine-functionalized perylene dye is used to probe acid sites on the external crystal surface, while DAMPI (4-(4-diethylaminostyryl)- N-methylpyridinium iodide) is used to map access to the straight channels in MFI from the outer surface. The use of these dyes is validated by studying the well-understood rounded-boat type ZSM-5 crystals. Next coffin-shaped ZSM-5 crystals are considered; we critically evaluate the seemingly conflicting 2-component and 3-component models that have been proposed to account for the hourglass structure in these crystals. The data prove that observation of an hourglass structure is essentially unrelated to a 90 degree rotation of the pyramidal crystal components under the (010) face. Hence, in perfectly formed coffin-shaped crystals, the straight channels can be accessed from (010). However, in other crystal batches, sections with a 90 degrees rotation can be found; they are indeed located inside the crystal sections under (010) but often only partially occupy these pyramidal components. In such a case, both straight and sinusoidal pores surface at the hexagonal face. The results largely support the 3-component model, but with the added notion that 90 degree rotated sections (as proposed in the 2-component model) are most likely to be formed inside the defect-rich, pyramidal crystal sections under the (010) faces.
Journal of Materials Chemistry | 2012
Frederik Vermoortele; Rob Ameloot; Luc Alaerts; Roman Matthessen; Bert Carlier; Enrique V. Ramos Fernandez; Jorge Gascon; Freek Kapteijn; Dirk E. De Vos
The effect of a post-synthetic acid treatment on the catalytic performance of MOFs is evaluated for MIL-100(Fe), an iron-benzenetricarboxylate. The acid-treated frameworks are structurally robust as no differences have been found in XRD patterns after treatment. Porosity of the acid-treated MOFs gradually decreases, most probably as a consequence of anions remaining in the charged frameworks. Monitoring the modification of the MOFs by reactions of which the outcome depends on the acid properties of the catalyst suggests the presence of two types of active sites, with weak Bronsted acid sites in close vicinity to the Lewis acid open metal sites. This is supported by CO-chemisorption experiments which indicate a large increase of both Lewis and Bronsted acidity. In Diels–Alder reactions of oxygenated dienophiles with 1,3-cyclohexadiene, a strong increase of the activity is found for the acid-treated MOFs. This is explained by the enhanced activation of the dienophiles on the modified active sites.