Robert C. Devlin

Metalenses at visible wavelengths: Diffraction-limited focusing and subwavelength resolution imaging

Multifunction planar optics Specially designed two-dimensional (2D) arrays of nanometer-scale metallic antennas, or metasurfaces, may allow bulky optical components to be shrunk down to a planar device structure. Khorasaninejad et al. show that arrays of nanoscale fins of TiO can function as high-end optical lenses. At just a fraction of the size of optical objectives, such planar devices could turn your phone camera or your contact lens into a compound microscope. Maguid et al. interleaved sparse 2D arrays of metal antennas to get multifunctional behavior from the one planar device structure (see the Perspective by Litchinitser). The enhanced functionality of such designed metasurfaces could be used in sensing applications or to increase the communication capacity of nanophotonic networks. Science, this issue pp. 1190 and 1202; see also p. 1177 A planar metasurface can function as a high-end optical lens. Subwavelength resolution imaging requires high numerical aperture (NA) lenses, which are bulky and expensive. Metasurfaces allow the miniaturization of conventional refractive optics into planar structures. We show that high-aspect-ratio titanium dioxide metasurfaces can be fabricated and designed as metalenses with NA = 0.8. Diffraction-limited focusing is demonstrated at wavelengths of 405, 532, and 660 nm with corresponding efficiencies of 86, 73, and 66%. The metalenses can resolve nanoscale features separated by subwavelength distances and provide magnification as high as 170×, with image qualities comparable to a state-of-the-art commercial objective. Our results firmly establish that metalenses can have widespread applications in laser-based microscopy, imaging, and spectroscopy.

Recent advances in planar optics: from plasmonic to dielectric metasurfaces

This article reviews recent progress leading to the realization of planar optical components made of a single layer of phase shifting nanostructures. After introducing the principles of planar optics and discussing earlier works on subwavelength diffractive optics, we introduce a classification of metasurfaces based on their different phase mechanisms and profiles and a comparison between plasmonic and dielectric metasurfaces. We place particular emphasis on the recent developments on electric and magnetic field control of light with dielectric nanostructures and highlight the physical mechanisms and designs required for efficient all-dielectric metasurfaces. Practical devices of general interest such as metalenses, beam deflectors, holograms, and polarizing interfaces are discussed, including high-performance metalenses at visible wavelengths. Successful strategies to achieve achromatic response at selected wavelengths and near unity transmission/reflection efficiency are discussed. Dielectric metasurfaces and dispersion management at interfaces open up technology opportunities for applications including wavefront control, lightweight imaging systems, displays, electronic consumer products, and conformable and wearable optics.

Broadband high-efficiency dielectric metasurfaces for the visible spectrum

Metasurfaces are planar optical elements that hold promise for overcoming the limitations of refractive and conventional diffractive optics1-3. Dielectric metasurfaces demonstrated thus far4-10 are limited to transparency windows at infrared wavelengths because of significant optical absorption and loss at visible wavelengths. It is critical that new materials and fabrication techniques be developed for dielectric metasurfaces at visible wavelengths to enable applications such as three-dimensional displays, wearable optics and planar optical systems11. Here, we demonstrate high performance titanium dioxide dielectric metasurfaces in the form of holograms for red, green and blue wavelengths with record absolute efficiency (>78%). We use atomic layer deposition of amorphous titanium dioxide that exhibits low surface roughness of 0.738 nm and ideal optical properties. To fabricate the metasurfaces we use a lift-off-like process that allows us to produce highly anisotropic nanofins with shape birefringence. This process is applicable to any optical element and can be implemented using a broad class of materials.Significance Metasurfaces are optical elements that can mimic and expand on the functionality of refractive optics with a comparatively thin and planar profile. Transmissive metasurfaces suffer from high optical loss at visible wavelengths because of currently used materials and fabrication techniques. This work introduces metasurfaces that operate across the visible spectrum with high efficiencies. As the basis of our metasurfaces, we used a common material, titanium dioxide, and a fabrication method based an atomic layer deposition that creates highly anisotropic nanostructures. The results presented here provide an important advance for realizing optical components at visible wavelengths—e.g., lenses, holograms, and phase shifters—with orders of magnitude reduction in thickness compared with traditional refractive optics. Metasurfaces are planar optical elements that hold promise for overcoming the limitations of refractive and conventional diffractive optics. Original dielectric metasurfaces are limited to transparency windows at infrared wavelengths because of significant optical absorption and loss at visible wavelengths. Thus, it is critical that new materials and nanofabrication techniques be developed to extend dielectric metasurfaces across the visible spectrum and to enable applications such as high numerical aperture lenses, color holograms, and wearable optics. Here, we demonstrate high performance dielectric metasurfaces in the form of holograms for red, green, and blue wavelengths with record absolute efficiency (>78%). We use atomic layer deposition of amorphous titanium dioxide with surface roughness less than 1 nm and negligible optical loss. We use a process for fabricating dielectric metasurfaces that allows us to produce anisotropic, subwavelength-spaced dielectric nanostructures with shape birefringence. This process is capable of realizing any high-efficiency metasurface optical element, e.g., metalenses and axicons.

Metasurface Polarization Optics: Independent Phase Control of Arbitrary Orthogonal States of Polarization

We present a method allowing for the imposition of two independent and arbitrary phase profiles on any pair of orthogonal states of polarization-linear, circular, or elliptical-relying only on simple, linearly birefringent wave plate elements arranged into metasurfaces. This stands in contrast to previous designs which could only address orthogonal linear, and to a limited extent, circular polarizations. Using this approach, we demonstrate chiral holograms characterized by fully independent far fields for each circular polarization and elliptical polarization beam splitters, both in the visible. This approach significantly expands the scope of metasurface polarization optics.

Probing Johnson noise and ballistic transport in normal metals with a single-spin qubit

Listen to the quantum art of noise Electrons in metals are subject to thermally induced noise that can generate tiny magnetic fields. For quantum electronic applications, the noise and magnetic fields can be damaging. Kolkowitz et al. show that the spin properties of single defects in diamond can be used to probe the noise. The findings provide insight into how the noise is generated, which could help to mitigate its damaging effects in sensitive quantum electronic circuits. Science, this issue p. 1129 Single spin defects in diamond can be used to probe electronic noise in thin metal films. [Also see Perspective by McGuinness and Jelezko] Thermally induced electrical currents, known as Johnson noise, cause fluctuating electric and magnetic fields in proximity to a conductor. These fluctuations are intrinsically related to the conductivity of the metal. We use single-spin qubits associated with nitrogen-vacancy centers in diamond to probe Johnson noise in the vicinity of conductive silver films. Measurements of polycrystalline silver films over a range of distances (20 to 200 nanometers) and temperatures (10 to 300 kelvin) are consistent with the classically expected behavior of the magnetic fluctuations. However, we find that Johnson noise is markedly suppressed next to single-crystal films, indicative of a substantial deviation from Ohm’s law at length scales below the electron mean free path. Our results are consistent with a generalized model that accounts for the ballistic motion of electrons in the metal, indicating that under the appropriate conditions, nearby electrodes may be used for controlling nanoscale optoelectronic, atomic, and solid-state quantum systems.

Arbitrary spin-to–orbital angular momentum conversion of light

From spins to spirals The polarization state of light can be used in imaging applications and optical communications. Light can also be structured into vortices that carry optical angular momentum, which can be used for micromanipulation and enhancing the capacity of optical communication channels. Devlin et al. present a metasurface converter for optical states that transforms polarization states into optical angular momentum states. The coupling between arbitrary spin and optical angular momentum states of light in a compact planar structure may find applications in producing complex structured light fields. Science, this issue p. 896 A designed metasurface can transform polarization states into optical angular momentum states. Optical elements that convert the spin angular momentum (SAM) of light into vortex beams have found applications in classical and quantum optics. These elements—SAM-to–orbital angular momentum (OAM) converters—are based on the geometric phase and only permit the conversion of left- and right-circular polarizations (spin states) into states with opposite OAM. We present a method for converting arbitrary SAM states into total angular momentum states characterized by a superposition of independent OAM. We designed a metasurface that converts left- and right-circular polarizations into states with independent values of OAM and designed another device that performs this operation for elliptically polarized states. These results illustrate a general material-mediated connection between SAM and OAM of light and may find applications in producing complex structured light and in optical communication.

Generation of wavelength-independent subwavelength Bessel beams using metasurfaces

Bessel beams are of great interest due to their unique non-diffractive properties. Using a conical prism or an objective paired with an annular aperture are two typical approaches for generating zeroth-order Bessel beams. However, the former approach has a limited numerical aperture (NA), and the latter suffers from low efficiency, as most of the incident light is blocked by the aperture. Furthermore, an additional phase-modulating element is needed to generate higher-order Bessel beams, which in turn adds complexity and bulkiness to the system. We overcome these problems using dielectric metasurfaces to realize meta-axicons with additional functionalities not achievable with conventional means. We demonstrate meta-axicons with high NA up to 0.9 capable of generating Bessel beams with full width at half maximum about as small as ~λ/3 (λ=405 nm). Importantly, these Bessel beams have transverse intensity profiles independent of wavelength across the visible spectrum. These meta-axicons can enable advanced research and applications related to Bessel beams, such as laser fabrication, imaging and optical manipulation.

Ultra-compact visible chiral spectrometer with meta-lenses

Conventional compact spectrometers have a fixed spectral resolution and cannot resolve the polarization properties of light without additional optical elements, while their larger counterparts are bulky and costly. Here, we demonstrate multiple off-axis meta-lenses in the visible integrated on a single planar substrate. They possess both focusing and strongly dispersive properties and are designed to provide different spectral resolutions as well as working wavelength ranges on the same chip. We realize a compact spectrometer using only these meta-lenses and a CMOS camera and achieve detector-limited spectral resolutions as small as 0.3 nm and a total working wavelength range exceeding 170 nm for a beam propagation length of only a few cm. In addition, this spectrometer has the capability to resolve different helicities of light in a single measurement. This chip-camera setup represents the most compact configuration so far achieved for a spectrometer with similar performance and functionality, and its co...

Visible Wavelength Planar Metalenses Based on Titanium Dioxide

We present recent advances in metasurface-based photonics, which enables the realization of high performance planar lenses (metalenses) in the visible spectrum. They are enabled by a technique based on atomic layer deposition of titanium dioxide allowing for the fabrication of nanostructures with high fidelity. First, we demonstrate highly efficient metalenses with numerical aperture NA = 0.8 using the Pancharatnam-Berry phase approach. These metalenses can focus light into a diffraction-limited spot. They have efficiencies as high as 86% and provide high imaging resolution. Furthermore, by judicious design of the phase-shifting elements, we achieve a multispectral chiral metalens realized with a single metasurface layer. This chiral metalens can resolve both the chiral and spectral information of an object without the requirement of any additional optical components. Finally, we discuss the experimental realization of polarization-insensitive metalenses with NAs as high as 0.85. They are able to focus incident light to a spot as small as ~0.64λ with efficiencies up to 60%. Due to its straightforward and CMOS-compatible fabrication, this platform is promising for a wide range of applications ranging from camera modules, displays, laser-based imaging, microscopy, and spectroscopy to laser fabrication and lithography.

New microscopy technique based on position localization of scattering particles

We introduce the Holographic - Single Scatterer Localization Microscopy in which we combine dynamical laser speckle illumination with centroid localization of backscattered light spots in order to localize isolated scattering particles. The reconstructed centroid images show very accurate particle localization, with precision much better than the width of diffraction-limited image of the particles recorded by the CCD. Furthermore, the method provides an improved resolution in distinguishing two very close scattering objects compared to the standard laser scanning techniques and can be assimilated to a confocal technique in the ability of light background rejection in three-dimensional disposition of scattering objects. The illumination is controlled via a digital holography setup based on the use of a spatial light modulator. This allows not only a high level of versatility in the illumination patterns, but also the remarkable characteristics of absence of moving mechanical parts, typical of the laser scanning techniques, and the possibility of strongly miniaturizing the setup.