Robert E. Rettew

A Phenomenological Study of the Metal-Oxide Interface : The Role of Catalysis in Hydrogen Production from Renewable Resources

The truth about Cats: The metal-oxide interface of a Pd-Rh/CeO{sub 2} catalyst was studied in the context of developing active, selective and durable solid catalytic materials for the production of hydrogen from renewables. The presence of a stable contact between finely dispersed transition-metal clusters (Pd and Rh) on the nanoparticles of the CeO{sub 2} support leads to a highly active and stable catalyst for the steam reforming of ethanol.

Interface Architecture Determined Electrocatalytic Activity of Pt on Vertically Oriented TiO2 Nanotubes

The surface atomic structure and chemical state of Pt is consequential in a variety of surface-intensive devices. Herein we present the direct interrelationship between the growth scheme of Pt films, the resulting atomic and electronic structure of Pt species, and the consequent activity for methanol electro-oxidation in Pt/TiO(2) nanotube hybrid electrodes. X-ray photoelectron spectroscopy (XPS) and X-ray absorption spectroscopy (XAS) measurements were performed to relate the observed electrocatalytic activity to the oxidation state and the atomic structure of the deposited Pt species. The atomic structure as well as the oxidation state of the deposited Pt was found to depend on the pretreatment of the TiO(2) nanotube surfaces with electrodeposited Cu. Pt growth through Cu replacement increases Pt dispersion, and a separation of surface Pt atoms beyond a threshold distance from the TiO(2) substrate renders them metallic, rather than cationic. The increased dispersion and the metallic character of Pt results in strongly enhanced electrocatalytic activity toward methanol oxidation. This study points to a general phenomenon whereby the growth scheme and the substrate-to-surface-Pt distance dictates the chemical state of the surface Pt atoms, and thereby, the performance of Pt-based surface-intensive devices.

Architecture-Dependent Surface Chemistry for Pt Monolayers on Carbon-Supported Au

Pt monolayers were grown by surface-limited redox replacement (SLRR) on two types of Au nanostructures. The Au nanostructures were fabricated electrochemically on carbon fiber paper (CFP) by either potentiostatic deposition (PSD) or potential square wave deposition (PSWD). The morphology of the Au/CFP heterostructures, examined using scanning electron microscopy (SEM), was found to depend on the type of Au growth method employed. The properties of the Pt deposit, as studied using X-ray photoelectron spectroscopy (XPS), X-ray absorption spectroscopy (XAS), and cyclic voltammetry (CV), were found to depend strongly on the morphology of the support. Specifically, it was found that smaller Au morphologies led to a higher degree of cationicity in the resulting Pt deposit, with Pt(4+) and Pt(2+) species being identified using XPS and XAS. For fuel-cell catalysts, the resistance of ultrathin catalyst deposits to surface area loss through dissolution, poisoning, and agglomeration is critical. This study shows that an equivalent of two monolayers (ML) is the low-loading limit of Pt on Au. At 1 ML or below, the Pt film decreases in activity and durability very rapidly due to presence of cationic Pt.

Layer-by-Layer Pt Growth on Polycrystalline Au: Surface-Limited Redox Replacement of Overpotentially Deposited Ni Monolayers

The catalyst system Pt/Au has been the subject of many studies recently, ranging from formic acid oxidation to oxidative studies for direct alcohol fuel cells. This paper outlines the use of overpotential Ni deposition as an intermediary for the creation of model overlayer/substrate Pt/Au catalysts with atomic monolayer (ML)-level thickness control. Deposition of Pt on polycrystalline Au was conducted via Ni surface-limited redox replacement. By electrodepositing a controlled layer of Ni on Au and exposing the resultant surface to Pt in solution, then repeating this technique for multiple iterations, Pt atomic MLs were electrolessly deposited on top of one another. The growth of Pt overlayers was demonstrated by X-ray photoelectron spectroscopy. The use of Ni as the replacement layer, as opposed to the commonly used Cu, opens up a range of metals for layer-by-layer deposition.

Electrical polarization of titanium surfaces for the enhancement of osteoblast differentiation

Electrical stimulation has been used clinically to promote bone regeneration in cases of fractures with delayed union or nonunion, with several in vitro and in vivo reports suggesting its beneficial effects on bone formation. However, the use of electrical stimulation of titanium (Ti) implants to enhance osseointegration is less understood, in part because of the few in vitro models that attempt to represent the in vivo environment. In this article, the design of a new in vitro system that allows direct electrical stimulation of osteoblasts through their Ti substrates without the flow of exogenous currents through the media is presented, and the effect of applied electrical polarization on osteoblast differentiation and local factor production was evaluated. A custom-made polycarbonate tissue culture plate was designed to allow electrical connections directly underneath Ti disks placed inside the wells, which were supplied with electrical polarization ranging from 100 to 500 mV to stimulate MG63 osteoblasts. Our results show that electrical polarization applied directly through Ti substrates on which the cells are growing in the absence of applied electrical currents may increase osteoblast differentiation and local factor production in a voltage-dependent manner.

Near Surface Phase Transition of Solute Derived Pt Monolayers

As the loadings of precious metals in surface-chemical systems continue to decrease for photo-and electro-catalysts for energy and environmental applications, the study of near-surface electronic and atomic structure in functional materials becomes critically important. Extremely small quantities of active elements, whether grown as clusters or ultrathin films, exhibit changes in catalytic activity that arise from both size effects and electron-transfer effects. These size and transfer effects can be related to increased propensity for oxidation of the metallic deposit, as well as to various changes in electrochemical performance such as durability or required overpotential for a given reaction. This work establishes a minimum threshold for Pt loading beyond which bulk-type electronic behavior may be expected. By iteratively growing atomic monolayers and multilayers using self-limited electrodeposition and studying these films using core-electron spectroscopy (X-ray absorption and X-ray photoelectron spectroscopy), electrochemical methods and DFT-based computations the fundamental interactions that govern oxidation state and electron transfer near the surface of a Pt–Au bimetallic system have been explored. It has been shown that the Pt–Au system exhibits increased tendency for the Pt layer to remain cationic below a minimum threshold film thickness of two monolayers. At monodispersed levels of submonolayer coverage Pt exhibits deviated electronic structure, reactivity, and metal stability compared to films in excess of this minimum threshold thickness. At three monolayers Pt is thick enough to avoid the preference for cationicity and the resulting higher rates of metal dissolution, but thin enough to benefit from electron transfers from Au that assist in lowering the overpotentials for CO oxidation. This study shows the efficacy of a concerted method for the investigation of near-surface phenomena in multicomponent systems. By combining electrochemical and vacuum studies of solute-derived samples with advanced computational techniques, a multifaceted understanding of these architectures has been achieved.

Interactions of Oxygen and Ethylene with Submonolayer Ag Films Supported on Ni(111)

We investigate the oxidation of, and the reaction of ethylene with, Ni(111) with and without sub-monolayer Ag adlayers as a function of temperature. The addition of Ag to Ni(111) is shown to enhance the activity towards the ethylene epoxidation reaction, and increase the temperature at which ethylene oxide is stable on the surface. We present a systematic study of the formation of chemisorbed oxygen on the Ag-Ni(111) surfaces and correlate the presence and absence of O(1-) and O(2-) surface species with the reactivity towards ethylene. By characterizing the samples with low-energy electron microscopy (LEEM) in combination with X-ray photoelectron spectroscopy (XPS), we have identified specific growth of silver on step-edge sites and successfully increased the temperature at which the produced ethylene oxide remains stable, a trait which is desirable for catalysis.

Synthesis and characterization of Monolayer Bimetallic Surfaces: a Synchrotron NEXAFS and XPS Study

Surface limited redox replacement (SLRR) is a potentially powerful tool for atomic monolayer-scale model catalyst fabrication for a plethora of spectroscopic techniques. This paper compares overpotential Ni deposition as an intermediary for SLRR with the traditional Cu intermediary method. It also presents the use of SLRR to fabricate samples for study using near-edge x-ray absorption fine structure (NEXAFS.) We present the use of NEXAFS spectroscopy to study adsorbate bonding strengths on this type of bimetallic model catalyst. We report a correlation between the strength of the adsorbate-Pt bond as a function of the thickness of Pt overlayers. Deposition of Pt on polycrystalline and single crystalline Au has been conducted via Ni and Cu replacement, respectively. The growth of Pt overlayers has been characterized by X-ray photoelectron spectroscopy (XPS) and cyclic voltammetry (CV).

In situ oxidation of ultrathin silver films on Ni(111)

Oxidation of silver films of one- and two-monolayer thicknesses on the Ni(111) surface was investigated by low-energy electron microscopy at temperatures of 500 and 600 K. Additionally, intensity--voltage curves were measured in situ during oxidation to reveal the local film structure on a nanometer scale. At both temperatures, we find that exposure to molecular oxygen leads to the destabilization of the Ag film with subsequent relocation of the silver atoms to small few-layer-thick silver patches and concurrent evolution of NiO(111) regions. Subsequent exposure of the oxidized surface to ethylene initiates the transformation of bilayer islands back into monolayer islands, demonstrating at least partial reversibility of the silver relocation process at 600 K.