Robert G. Acres

Surface-assisted Dehydrogenative Homocoupling of Porphine Molecules

The templated synthesis of porphyrin dimers, oligomers, and tapes has recently attracted considerable interest. Here, we introduce a clean, temperature-induced covalent dehydrogenative coupling mechanism between unsubstituted free-base porphine units yielding dimers, trimers, and larger oligomers directly on a Ag(111) support under ultrahigh-vacuum conditions. Our multitechnique approach, including scanning tunneling microscopy, near-edge X-ray absorption fine structure and photoelectron spectroscopy complemented by theoretical modeling, allows a comprehensive characterization of the resulting nanostructures and sheds light on the coupling mechanism. We identify distinct coupling motifs and report a decrease of the electronic gap and a modification of the frontier orbitals directly associated with the formation of triply fused dimeric species. This new on-surface homocoupling protocol yields covalent porphyrin nanostructures addressable with submolecular resolution and provides prospective model systems towards the exploration of extended oligomers with tailored chemical and physical properties.

Self-terminating protocol for an interfacial complexation reaction in vacuo by metal-organic chemical vapor deposition.

The fabrication and control of coordination compounds or architectures at well-defined interfaces is a thriving research domain with promise for various research areas, including single-site catalysis, molecular magnetism, light-harvesting, and molecular rotors and machines. To date, such systems have been realized either by grafting or depositing prefabricated metal-organic complexes or by protocols combining molecular linkers and single metal atoms at the interface. Here we report a different pathway employing metal-organic chemical vapor deposition, as exemplified by the reaction of meso-tetraphenylporphyrin derivatives on atomistically clean Ag(111) with a metal carbonyl precursor (Ru3(CO)12) under vacuum conditions. Scanning tunneling microscopy and X-ray spectroscopy reveal the formation of a meso-tetraphenylporphyrin cyclodehydrogenation product that readily undergoes metalation after exposure to the Ru-carbonyl precursor vapor and thermal treatment. The self-terminating porphyrin metalation protocol proceeds without additional surface-bound byproducts, yielding a single and thermally robust layer of Ru metalloporphyrins. The introduced fabrication scheme presents a new approach toward the realization of complex metal-organic interfaces incorporating metal centers in unique coordination environments.

Bonding of histidine to cerium oxide.

Adsorption of histidine on cerium oxide model surfaces was investigated by synchrotron radiation photoemission, resonant photoemission, and near edge X-ray absorption fine structure spectroscopies. Histidine was evaporated in a vacuum onto ordered stoichiometric CeO2(111) and partially reduced CeO1.9 thin films grown on Cu(111). Histidine binds to CeO2 in anionic form via the carboxylate group and all three nitrogen atoms, with the imidazole ring parallel to the surface. The amino nitrogen atom of the imidazole ring (IM) is deprotonated, and both IM nitrogen atoms form strong bonds via π orbitals, while the α-amino nitrogen interacts with the oxide via its hydrogen atoms. In the case of CeO1.9, the deprotonation of the amino nitrogen of the imidazole ring is less pronounced and N K-edge spectra do not show a clear orientation of the ring with respect to the surface. A minor reduction of the cerium surface on adsorption of histidine was observed and explained by charge exchange as a result of hybridization of the π orbitals of the IM ring with the f and d orbitals of ceria. Knowledge of histidine adsorption on the cerium oxide surface can be used for design of mediator-less biosensors where the histidine-containing proteins can be strongly bound to the oxide surface via the imidazole side chain of this residue.

A Close Look at the Structure of the TiO2-APTES Interface in Hybrid Nanomaterials and Its Degradation Pathway: An Experimental and Theoretical Study

The surface functionalization of TiO2-based materials with alkylsilanes is attractive in several cutting-edge applications, such as photovoltaics, sensors, and nanocarriers for the controlled release of bioactive molecules. (3-Aminopropyl)triethoxysilane (APTES) is able to self-assemble to form monolayers on TiO2 surfaces, but its adsorption geometry and solar-induced photodegradation pathways are not well understood. We here employ advanced experimental (XPS, NEXAFS, AFM, HR-TEM, and FT-IR) and theoretical (plane-wave DFT) tools to investigate the preferential interaction mode of APTES on anatase TiO2. We demonstrate that monomeric APTES chemisorption should proceed through covalent Si–O–Ti bonds. Although dimerization of the silane through Si–O–Si bonds is possible, further polymerization on the surface is scarcely probable. Terminal amino groups are expected to be partially involved in strong charge-assisted hydrogen bonds with surface hydroxyl groups of TiO2, resulting in a reduced propensity to react with other species. Solar-induced mineralization proceeds through preferential cleavage of the alkyl groups, leading to the rapid loss of the terminal NH2 moieties, whereas the Si-bearing head of APTES undergoes slower oxidation and remains bound to the surface. The suitability of employing the silane as a linker with other chemical species is discussed in the context of controlled degradation of APTES monolayers for drug release and surface patterning.

Adsorption of cytosine and AZA derivatives of cytidine on Au single crystal surfaces

The adsorption of cytosine on the Au(111) and Au(110) surfaces has been studied using both aqueous deposition and evaporation in vacuum to prepare the samples. Soft X-ray photoelectron spectroscopy (XPS) and near edge X-ray absorption fine structure spectroscopy (NEXAFS) were used to determine the electronic structure and orientation of the adsorbates. In addition, three derivatives of cytosine, 6-azacytosine, 6-azacytidine and 5- azacytidine, were studied. Monolayer films of the latter three samples were adsorbed on Au(111) from aqueous solution, and the nature of bonding was determined. Spectra have been interpreted in the light of published calculations of free cytosine molecules and new ab initio calculations of the other compounds. Surface core level shifts of Au 4f imply that all of these compounds are chemisorbed. Cytosine adsorbs as a single tautomer, but in two chemical states with different surface-molecule bonding. For deposition in vacuum, a flat-lying molecular state bonded through the N(3) atom of the pyrimidine ring dominates, but a second state is also present. For deposition from solution, the second state dominates, with the molecular plane no longer parallel to the surface. This state also bonds through the N(3) atom, but in addition interacts with the surface via the amino group. Two tautomers of 6-azacytosine were observed, and they and 6-azacytidine adsorb with similar geometries, chemically bonding via the azacytosine ring. The ribose ring does not appear to perturb the adsorption of azacytidine compared with azacytosine. The azacytosine ring is nearly but not perfectly parallel to the surface, like 5-azacytidine, which adsorbs as an imino tautomer. ...

Adenine adlayers on Cu(111): XPS and NEXAFS study.

The adsorption of adenine on Cu(111) was studied by photoelectron and near edge x-ray absorption fine structure spectroscopy. Disordered molecular films were deposited by means of physical vapor deposition on the substrate at room temperature. Adenine chemisorbs on the Cu(111) surface with strong rehybridization of the molecular orbitals and the Cu 3d states. Annealing at 150 °C caused the desorption of weakly bonded molecules accompanied by formation of a short-range ordered molecular adlayer. The interface is characterized by the formation of new states in the valence band at 1.5, 7, and 9 eV. The present work complements and refines existing knowledge of adenine interaction with this surface. The coverage is not the main parameter that defines the adenine geometry and adsorption properties on Cu(111). Excess thermal energy can further rearrange the molecular adlayer and, independent of the initial coverage, the flat lying stable molecular adlayer is formed.

Structures of cycloserine and 2-oxazolidinone probed by X-ray photoelectron spectroscopy: theory and experiment.

The electronic structures and properties of 2-oxazolidinone and the related compound cycloserine (CS) have been investigated using theoretical calculations and core and valence photoelectron spectroscopy. Isomerization of the central oxazolidine heterocycle and the addition of an amino group yield cycloserine. Theory correctly predicts the C, N, and O 1s core spectra, and additionally, we report theoretical natural bond orbital (NBO) charges. The valence ionization energies are also in agreement with theory and previous measurements. Although the lowest binding energy part of the spectra of the two compounds shows superficial similarities, further analysis of the charge densities of the frontier orbitals indicates substantial reorganization of the wave functions as a result of isomerization. The highest occupied molecular orbital (HOMO) of CS shows leading carbonyl π character with contributions from other heavy (non-H) atoms in the molecule, while the HOMO of 2-oxazolidinone (OX2) has leading nitrogen, carbon, and oxygen pπ characters. The present study further theoretically predicts bond resonance effects of the compounds, evidence for which is provided by our experimental measurements and published crystallographic data.

X-ray Photoemission Spectra and Electronic Structure of Coumarin and its Derivatives.

The electronic structures of coumarin and three of its derivatives (7-amino-4-methylcoumarin, 7-amino-4-(trifluoro)methylcoumarin, and 4-hydroxycoumarin) have been studied by theoretical calculations, and compared with experimental valence and core photoelectron spectra to benchmark the predicted spectra. The outer valence band spectra of the first three compounds showed good agreement with theoretical calculations for a single isomer, whereas the spectrum of 4-hydroxycoumarin indicated the presence of more than one tautomer, consistent with published results. Calculations of core level spectra of carbon, nitrogen, oxygen, and fluorine of the first three compounds are also in satisfactory agreement with our measurements. The carbon and oxygen 1s spectra of 4-hydroxycoumarin allow us to identify and quantify the populations of the principle tautomers present. The 4-hydroxy enol form is the most stable isomer at 348 K, followed by the diketo form, with 1.3 kJ·mol(-1) lower energy.

Electronic structure and intramolecular interactions in three methoxyphenol isomers

Electronic structures and intramolecular interactions of three methoxyphenol positional isomers and their rotamers have been studied using core X-ray photoelectron spectroscopy and quantum mechanical calculations. The structural calculations are benchmarked against published calculations of enthalpy of formation and rotational constants, and published experimental data. The good agreement obtained confirms the accuracy of the results. A single rotamer of each isomer was then selected and the C 1s photoelectron spectra calculated and compared with experiment. Good agreement is obtained, and the calculations were extended to investigate the effects of conformation. For 3-methoxyphenol, the difference in the C 1s binding energy of the conformers is small, <0.15 eV. For 2-methoxyphenol, whose ground state includes an OH⋯OCH3 hydrogen bond, the higher energy rotamers show the largest shifts for the methyl carbon atom, whereas the ring carbon bonded to OH hardly shifts The theoretical differences in core level energies of the two rotamers of 4-MP are still smaller, <0.05 eV. By comparing calculations neglecting or including final state relaxation upon ionization, the relaxation energy of the phenyl carbons in all isomers is found to be ∼0.5 eV, while that of the methyl groups is ∼1.3 eV.

Adsorption of ethylene on Sn and In terminated Si(001) surface studied by photoelectron spectroscopy and scanning tunneling microscopy

Interaction of ethylene (C2H4) with Si(001)-Sn-2 × 2 and Si(001)-In-2 × 2 at room temperature has been studied using core level (C 1s) X-ray photoelectron spectroscopy with synchrotron radiation and scanning tunneling microscopy. Sn and In form similar dimer chains on Si(001)2 × 1, but exhibit different interaction with ethylene. While ethylene adsorbs on top of Sn dimers of the Si(001)-Sn-2 × 2 surface, the Si(001)-In-2 × 2 surface turned out to be inert. Furthermore, the reactivity of the Sn terminated surface is found to be considerably decreased in comparison with Si(001)2 × 1. According to the proposed adsorption model ethylene bonds to Sn dimers via [2 + 2] cycloaddition by interacting with their π dimer bonds. In contrast, indium dimers do not contain π bonds, which renders the In terminated Si(001) surface inert for ethylene adsorption.