Robert L. Harniman

Self-assembling cages from coiled-coil peptide modules

From Coils to Cages Self-assembly strategies that mimic protein assembly, such as the formation of viral coats, often begin with simpler peptide assemblies. Fletcher et al. (p. 595, published online 11 April; see the Perspective by Ardejani and Orner) designed two coiled-coil peptide motifs, a heterodimer, and a homotrimer. Both peptides contained cysteine residues and could link through disulfide bonds, so that the trimer could form the vertices of a hexagonal network and the dimer its edges. However, these components are flexible and, rather than form extended sheets, they closed to form particles ∼100 nanometers in diameter. Hexagonal networks form from heterodimeric and homotrimeric coiled coils and create ~100-nanometer-diameter cages. [Also see Perspective by Ardejani and Orner] An ability to mimic the boundaries of biological compartments would improve our understanding of self-assembly and provide routes to new materials for the delivery of drugs and biologicals and the development of protocells. We show that short designed peptides can be combined to form unilamellar spheres approximately 100 nanometers in diameter. The design comprises two, noncovalent, heterodimeric and homotrimeric coiled-coil bundles. These are joined back to back to render two complementary hubs, which when mixed form hexagonal networks that close to form cages. This design strategy offers control over chemistry, self-assembly, reversibility, and size of such particles.

Uniform patchy and hollow rectangular platelet micelles from crystallizable polymer blends

Growing patterned rectangular objects The growth of patterned objects usually requires a template to aid the positioning of multiple materials. Qiu et al. used the seeded growth of a crystallizable block copolymer and a homopolymer to produce highly uniform rectangular structures (see the Perspective by Ballauff). Chemical etching, or dissolution, of uncross-linked regions of the rectangular structures produced perforated platelet micelles. The sequential addition of different blends and cross-linking/dissolution strategies allowed the formation of well-defined hollow rectangular micelles, which can be functionalized in a variety of ways. Science, this issue p. 697; see also p. 656 Crystallization-driven living supramolecular polymerization can selectively form rectangular objects. The preparation of colloidally stable, self-assembled materials with tailorable solid or hollow two-dimensional (2D) structures represents a major challenge. We describe the formation of uniform, monodisperse rectangular platelet micelles of controlled size by means of seeded-growth methods that involve the addition of blends of crystalline-coil block copolymers and the corresponding crystalline homopolymer to cylindrical micelle seeds. Sequential addition of different blends yields solid platelet block comicelles with concentric rectangular patches with distinct coronal chemistries. These complex nano-objects can be subject to spatially selective processing that allows their disassembly to form perforated platelets, such as well-defined hollow rectangular rings. The solid and hollow 2D micelles provide a tunable platform for further functionalization and potential for a variety of applications.

Aptamer-MIP hybrid receptor for highly sensitive electrochemical detection of prostate specific antigen

This study reports the design and evaluation of a new synthetic receptor sensor based on the amalgamation of biomolecular recognition elements and molecular imprinting to overcome some of the challenges faced by conventional protein imprinting. A thiolated DNA aptamer with established affinity for prostate specific antigen (PSA) was complexed with PSA prior to being immobilised on the surface of a gold electrode. Controlled electropolymerisation of dopamine around the complex served to both entrap the complex, holding the aptamer in, or near to, its binding conformation, and to localise the PSA binding sites at the sensor surface. Following removal of PSA, it was proposed that the molecularly imprinted polymer (MIP) cavity would act synergistically with the embedded aptamer to form a hybrid receptor (apta-MIP), displaying recognition properties superior to that of aptamer alone. Electrochemical impedance spectroscopy (EIS) was used to evaluate subsequent rebinding of PSA to the apta-MIP surface. The apta-MIP sensor showed high sensitivity with a linear response from 100pg/ml to 100ng/ml of PSA and a limit of detection of 1pg/ml, which was three-fold higher than aptamer alone sensor for PSA. Furthermore, the sensor demonstrated low cross-reactivity with a homologous protein (human Kallikrein 2) and low response to human serum albumin (HSA), suggesting possible resilience to the non-specific binding of serum proteins.

A threading receptor for polysaccharides

Cellulose, chitin and related polysaccharides are key renewable sources of organic molecules and materials. However, poor solubility tends to hamper their exploitation. Synthetic receptors could aid dissolution provided they are capable of cooperative action, for example by multiple threading on a single polysaccharide molecule. Here we report a synthetic receptor designed to form threaded complexes (polypseudorotaxanes) with these natural polymers. The receptor binds fragments of the polysaccharides in aqueous solution with high affinities (Ka up to 19,000 M−1), and is shown—by nuclear Overhauser effect spectroscopy—to adopt the threading geometry. Evidence from induced circular dichroism and atomic force microscopy implies that the receptor also forms polypseudorotaxanes with cellulose and its polycationic analogue chitosan. The results hold promise for polysaccharide solubilization under mild conditions, as well as for new approaches to the design of biologically active molecules. A synthetic receptor has been designed to form pseudorotaxanes and polypseudorotaxanes with oligo/polysaccharides in water. Target substrates have all-equatorial substitution patterns, and include cellulose, cellodextrins and the cationic polysaccharide chitosan. The results suggest an approach to dissolving these polysaccharides under mild conditions and could prove useful for processing these abundant renewable resources.

Scalable and uniform 1D nanoparticles by synchronous polymerization, crystallization and self-assembly

The preparation of well-defined nanoparticles based on soft matter, using solution-processing techniques on a commercially viable scale, is a major challenge of widespread importance. Self-assembly of block copolymers in solvents that selectively solvate one of the segments provides a promising route to core-corona nanoparticles (micelles) with a wide range of potential uses. Nevertheless, significant limitations to this approach also exist. For example, the solution processing of block copolymers generally follows a separate synthesis step and is normally performed at high dilution. Moreover, non-spherical micelles-which are promising for many applications-are generally difficult to access, samples are polydisperse and precise dimensional control is not possible. Here we demonstrate the formation of platelet and cylindrical micelles at concentrations up to 25% solids via a one-pot approach-starting from monomers-that combines polymerization-induced and crystallization-driven self-assembly. We also show that performing the procedure in the presence of small seed micelles allows the scalable formation of low dispersity samples of cylindrical micelles of controlled length up to three micrometres.

Crystallization-Driven Solution Self-Assembly of Block Copolymers with a Photocleavable Junction

Light-responsive block copolymers have been prepared with a crystallizable core-forming poly(ferrocenyldimethylsilane) (PFS) block, a corona-forming segment of poly(2-vinylpyridine) (P2VP), and a photocleavable o-nitrobenzyl (ONB) junction. These PFS-ONB-P2VP materials form monodisperse cylindrical micelles by living crystallization-driven self-assembly in a selective solvent for P2VP. The P2VP coronas were readily removed by photocleavage at the ONB linker, leading to PFS cylinders with a residual percentage of corona chains dependent on the photoirradiation time. Addition of PFS block copolymer unimers to a solution of the cylinders with ca. 10% residual coronal chains led to the formation of branched rather than linear micelles. The synthetic utility of the PFS-ONB-P2VP materials was further demonstrated by the preparation of nearly monodisperse P2VP nanotubes of tunable length using a strategy that also involved corona cross-linking.

Self-Assembly of a Functional Oligo(Aniline)-Based Amphiphile into Helical Conductive Nanowires

A tetra(aniline)-based cationic amphiphile, TANI-NHC(O)C5H10N(CH3)3+Br– (TANI-PTAB) was synthesized, and its emeraldine base (EB) state was found to self-assemble into nanowires in aqueous solution. The observed self-assembly is described by an isodesmic model, as shown by temperature-dependent UV–vis investigations. Linear dichroism (LD) studies, combined with computational modeling using time-dependent density functional theory (TD-DFT), suggests that TANI-PTAB molecules are ordered in an antiparallel arrangement within nanowires, with the long axis of TANI-PTAB arranged perpendicular to the nanowire long axis. Addition of either S- or R- camphorsulfonic acid (CSA) to TANI-PTAB converted TANI to the emeraldine salt (ES), which retained the ability to form nanowires. Acid doping of TANI-PTAB had a profound effect on the nanowire morphology, as the CSA counterions’ chirality translated into helical twisting of the nanowires, as observed by circular dichroism (CD). Finally, the electrical conductivity of CSA-doped helical nanowire thin films processed from aqueous solution was 2.7 mS cm–1. The conductivity, control over self-assembled 1D structure and water-solubility demonstrate these materials’ promise as processable and addressable functional materials for molecular electronics, redox-controlled materials and sensing.

Two-dimensional assemblies from crystallizable homopolymers with charged termini

The creation of shaped, uniform and colloidally stable two-dimensional (2D) assemblies by bottom-up methods represents a challenge of widespread current interest for a variety of applications. Herein, we describe the utilization of surface charge to stabilize self-assembled planar structures that are formed from crystallizable polymer precursors by a seeded growth approach. Addition of crystallizable homopolymers with charged end-groups to seeds generated by the sonication of block copolymer micelles with crystalline cores yields uniform platelet micelles with controlled dimensions. Significantly, the seeded growth approach is characterized by a morphological memory effect whereby the origin of the seed, which can involve a quasi-hexagonal or rectangular 2D platelet precursor, dictates the observed 2D platelet shape. This new strategy is illustrated using two different polymer systems, and opens the door to the construction of 2D hierarchical structures with broad utility.

Chitosan silk-based three-dimensional scaffolds containing gentamicin-encapsulated calcium alginate beads for drug administration and blood compatibility

In the present study gentamicin was encapsulated within calcium alginate beads and incorporated into porous chitosan, gelatin, double-hybrid silk fibroin, chitosan/gelatin and double-hybrid silk fibroin/chitosan scaffolds. Physiochemical, morphological and biological properties of fabricated amenable model systems were evaluated, revealing hemocompatible nature of double-hybrid silk fibroin/chitosan and double-hybrid silk fibroin scaffolds of hemolysis %<5 and porosity >85%. Fourier transform infrared results confirmed the blend formation and scanning electron microscope images showed good interconnectivity. Double-hybrid silk fibroin/chitosan-blended scaffold shows higher compressive strength and compressive modulus than other fabricated scaffolds. A comparative drug release profile of fabricated scaffolds revealed that double-hybrid silk fibroin/chitosan scaffold is a pertinent model system because of its prolonged drug release, optimal hemocompatability and high compressive modulus.

Direct observation of electron emission from the grain boundaries of chemical vapour deposition diamond films by tunneling atomic force microscopy

The emission of electrons from diamond in vacuum occurs readily as a result of the negative electron affinity of the hydrogenated surface due to features with nanoscale dimensions, which can concentrate electric fields high enough to induce electron emission from them. Electrons can be emitted as a result of an applied electric field (field emission) with possible uses in displays or cold-cathode devices. Alternatively, electrons can be emitted simply by heating the diamond in vacuum to temperatures as low as 350 °C (thermionic emission), and this may find applications in solar energy generation or energy harvesting devices. Electron emission studies usually use doped polycrystalline diamond films deposited onto Si or metallic substrates by chemical vapor deposition, and these films have a rough, faceted morphology on the micron or nanometer scale. Electron emission is often improved by patterning the diamond surface into sharp points or needles, the idea being that the field lines concentrate at the poin...