Robert M. Breece

Replacing Mn2+ with Co2+ in Human Arginase I Enhances Cytotoxicity toward L-Arginine Auxotrophic Cancer Cell Lines

Replacing the two Mn(2+) ions normally present in human Arginase I with Co(2+) resulted in a significantly lowered K(M) value without a concomitant reduction in k(cat). In addition, the pH dependence of the reaction was shifted from a pK(a) of 8.5 to a pK(a) of 7.5. The combination of these effects led to a 10-fold increase in overall catalytic activity (k(cat)/K(M)) at pH 7.4, close to the pH of human serum. Just as important for therapeutic applications, Co(2+) substitution lead to significantly increased serum stability of the enzyme. Our data can be explained by direct coordination of l-Arg to one of the Co(2+) ions during reaction, consistent with previously reported model studies. In vitro cytotoxicity experiments verified that the Co(2+)-substituted human Arg I displays an approximately 12- to 15-fold lower IC(50) value for the killing of human hepatocellular carcinoma and melanoma cell lines and thus constitutes a promising new candidate for the treatment of l-Arg auxotrophic tumors.

Differential Binding of Co(II) and Zn(II) to Metallo-β-Lactamase Bla2 from Bacillus anthracis

In an effort to probe the structure, mechanism, and biochemical properties of metallo-beta-lactamase Bla2 from Bacillus anthracis, the enzyme was overexpressed, purified, and characterized. Metal analyses demonstrated that recombinant Bla2 tightly binds 1 equiv of Zn(II). Steady-state kinetic studies showed that mono-Zn(II) Bla2 (1Zn-Bla2) is active, while di-Zn(II) Bla2 (ZnZn-Bla2) was unstable. Catalytically, 1Zn-Bla2 behaves like the related enzymes CcrA and L1. In contrast, di-Co(II) Bla2 (CoCo-Bla2) is substantially more active than the mono-Co(II) analogue. Rapid kinetics and UV-vis, (1)H NMR, EPR, and EXAFS spectroscopic studies show that Co(II) binding to Bla2 is distributed, while EXAFS shows that Zn(II) binding is sequential. To our knowledge, this is the first documented example of a Zn enzyme that binds Co(II) and Zn(II) via distinct mechanisms, underscoring the need to demonstrate transferability when extrapolating results on Co(II)-substituted proteins to the native Zn(II)-containing forms.

Structural and Kinetic Studies on Metallo-β-lactamase IMP-1

In an effort to probe for metal binding to metallo-β-lactamase (MβL) IMP-1, the enzyme was overexpressed, purified, and characterized. The resulting enzyme was shown to bind 2 equiv of Zn(II), exhibit significant catalytic activity, and yield EXAFS results similar to crystallographic data previously reported. Rapid kinetic studies showed that IMP-1 does not stabilize a nitrocefin-derived reaction intermediate; rather, the enzyme follows a simple Michaelis mechanism to hydrolyze nitrocefin. Metal-substituted and metal-reconstituted analogues of IMP-1 were prepared by directly adding metal ion stocks to metal-free enzyme, which was generated by dialysis versus EDTA. UV-vis studies on IMP-1 containing 1 equiv of Co(II) showed a strong ligand-to-metal charge transition at 340 nm, and the intensity of this feature increased when the second equivalent of Co(II) was added to the enzyme. EXAFS fits on IMP-1 containing 1 equiv of Co(II) strongly suggest the presence of a metal-metal interaction, and EPR spectra of the IMP-1 containing 1 and 2 equiv of Co(II) are very similar. Taken together, steady-state kinetic and spectroscopic studies suggest that metal binding to metal-free IMP-1 follows a positive-cooperative mode.

Motion of the Zinc Ions in Catalysis by a Dizinc Metallo-β-Lactamase

We report rapid-freeze-quench X-ray absorption spectroscopy of a dizinc metallo-beta-lactamase (MbetaL) reaction intermediate. The Zn(II) ions in the dinuclear active site of the S. maltophilia Class B3 MbetaL move away from each other, by approximately 0.3 A after 10 ms of reaction with nitrocefin, from 3.4 to 3.7 A. Together with our previous characterization of the resting enzyme and its nitrocefin product complex, where the Zn(II) ion separation relaxes to 3.6 A, these data indicate a scissoring motion of the active site that accompanies the ring-opening step. The average Zn(II) coordination number of 4.5 in the resting enzyme appears to be maintained throughout the reaction with nitrocefin. This is the first direct structural information available on early stage dizinc metallo-beta-lactamase catalysis.

Rational design, synthesis and evaluation of first generation inhibitors of the Giardia lamblia fructose-1,6-biphosphate aldolase.

Inhibitors of the Giardia lamblia fructose 1,6-bisphosphate aldolase (GlFBPA), which transforms fructose 1,6-bisphosphate (FBP) to dihydroxyacetone phosphate and glyceraldehyde 3-phosphate, were designed based on 3-hydroxy-2-pyridone and 1,2-dihydroxypyridine scaffolds that position two negatively charged tetrahedral groups for interaction with substrate phosphate binding residues, a hydrogen bond donor to the catalytic Asp83, and a Zn(2+) binding group. The inhibition activities for the GlFBPA catalyzed reaction of FBP of the prepared alkyl phosphonate/phosphate substituted 3-hydroxy-2-pyridinones and a dihydroxypyridine were determined. The 3-hydroxy-2-pyridone inhibitor 8 was found to bind to GlFBPA with an affinity (K(i)=14μM) that is comparable to that of FBP (K(m)=2μM) or its inert analog TBP (K(i)=1μM). The X-ray structure of the GlFBPA-inhibitor 8 complex (2.3Å) shows that 8 binds to the active site in the manner predicted by in silico docking with the exception of coordination with Zn(2+). The observed distances and orientation of the pyridone ring O=C-C-OH relative to Zn(2+) are not consistent with a strong interaction. To determine if Zn(2+)coordination occurs in the GlFBPA-inhibitor 8 complex in solution, EXAFS spectra were measured. A four coordinate geometry comprised of the three enzyme histidine ligands and an oxygen atom from the pyridone ring O=C-C-OH was indicated. Analysis of the Zn(2+) coordination geometries in recently reported structures of class II FBPAs suggests that strong Zn(2+) coordination is reserved for the enediolate-like transition state, accounting for minimal contribution of Zn(2+) coordination to binding of 8 to GlFBPA.

Characterization of Zn(II)-responsive ribosomal proteins YkgM and L31 in E. coli

RT-PCR and DNA microarrays were used to probe for Zn(II)-responsive genes in E. coli cells that were made Zn(II) deficient. Microarray data revealed 114 genes were significantly up-regulated and 146 genes were significantly down-regulated in Zn(II) deficient conditions. The three most up-regulated genes were (1) znuA, which encodes for a periplasmic protein known to be involved with Zn(II) import, (2) yodA, which encodes for a periplasmic protein with unknown function, and (3) ykgM, which encodes for a ribosomal protein that is thought to be a paralog of ribosomal protein L31. YodA was over-expressed and purified as a maltose binding protein (MBP) fusion protein and shown to tightly bind 4 equivalents of Zn(II). Metal analyses showed that MBP-YkgM does not bind Zn(II). On the other hand, MBP-L31 tightly binds 1 equivalent of Zn(II). EXAFS studies on MBP-L31 suggest a ligand field of 1 histidine, 1 cysteine, and 2 additional N/O scatterers. Site-directed mutagenesis studies suggest that Cys16 coordinates Zn(II) in MBP-L31 and that the other three cysteines do not bind metal. These results are discussed in light of Zn(II) starvation model that has been postulated for B. subtilis.

Nanometer to Millimeter Scale Peptide-Porphyrin Materials

AQ-Pal14 is a 30-residue polypeptide that was designed to form an α-helical coiled coil that contains a metal-binding 4-pyridylalanine residue on its solvent-exposed surface. However, characterization of this peptide shows that it exists as a three-stranded coiled coil, not a two-stranded one as predicted from its design. Reaction with cobalt(III) protoporphyrin IX (Co-PPIX) produces a six-coordinate Co-PPIX(AQ-Pal14)(2) species that creates two coiled-coil oligomerization domains coordinated to opposite faces of the porphyrin ring. It is found that this species undergoes a buffer-dependent self-assembly process: nanometer-scale globular materials were formed when these components were reacted in unbuffered H(2)O, while millimeter-scale, rod-like materials were prepared when the reaction was performed in phosphate buffer (20 mM, pH 7). It is suggested that assembly of the globular material is dictated by the conformational properties of the coiled-coil forming AQ-Pal14 peptide, whereas that of the rod-like material involves interactions between Co-PPIX and phosphate ion.

X-ray absorption spectroscopy of metal site speciation in the metallo-β-lactamase BcII from Bacillus cereus

Cobalt and zinc binding by the subclass B1 metallo-β-lactamase BcII from Bacillus cereus is examined by X-ray absorption spectroscopy, at various levels of metal loading. The data show that a significant amount of the dinuclear enzyme is formed, even at substoichiometric levels of metal loading, whether the added metal is Zn(II) or Co(II). Increasing metal addition, from 0.5 to 1.0 to 2.0eq/mol of enzyme, are shown to result in a more ordered active site. While Zn(II) appears to show no preference for the Zn(1) (3H) or Zn(2) (DCH) sites, the extended X-ray absorption fine structure (EXAFS) suggests that Co(II) shows a slight preference for the DCH site at low levels of added Co(II). The results are discussed in the context of similar metal-binding studies of other B1 metallo-β-lactamases.