Robert S. Richards

Patient rating of wrist pain and disability : A reliable and valid measurement tool

OBJECTIVE The goal of this study was to develop a reliable and valid tool for quantifying patient-rated wrist pain and disability. DESIGN Survey, tool development, reliability, and validity study. SETTING Upper extremity unit. PARTICIPANTS One hundred members of the International Wrist Investigators were surveyed by mail to assist in development of the scale. Patients with distal radius (n = 64) or scaphoid (n = 35) fractures were enrolled in a reliability study, and 101 patients with distal radius fractures were enrolled in a validity study. INTERVENTION Information from the expert survey, biomechanical literature, and patient interviews was used as a basis for item generation and definition of structural limitations for a scale that would be practical in the clinic. Patients with distal radius or scaphoid fractures completed the Patient-Rated Wrist Evaluation (PRWE) on two occasions to determine test-retest reliability. Patients with distal radius fractures (n = 101) completed the PRWE and the SF-36 and were tested with traditional impairment measures at baseline and at two, three, and six months after fracture to determine construct and criterion validity. MAIN OUTCOME MEASURES Reliability coefficients (ICCs) and validity correlations (Pearson product moment correlations). RESULTS Patient opinions on pain and on ability to do activities of daily living and work were thought to be the most important dimensions to include in subjective outcome tools. Brevity and simplicity were seen as essential in the clinic environment. A fifteen-item questionnaire (the PRWE) was designed to measure wrist pain and disability. Test-retest reliability was excellent (ICCs > 0.90). Validity assessment demonstrated that the instrument detected significant differences over time (p < 0.01) and was appropriately correlated with alternate forms of assessing parameters of pain and disability. CONCLUSIONS The PRWE provides a brief, reliable, and valid measure of patient-rated pain and disability.

Arthroscopic diagnosis of intra-articular soft tissue injuries associated with distal radial fractures

Arthroscopy was used to assess the soft tissue injuries associated with distal radial fractures in 118 acute intra- and extra-articular fractures. The triangular fibrocartilage complex (TFCC) was torn in 46 of 118 patients--in 35% of intra-articular fractures and in 53% of extra-articular fractures. No correlation between ulnar styloid fractures and TFCC injuries could be found. Scapholunate (SL) ligament injuries with instability were present in 21.5% of intra-articular fractures and in 6.7% of extra-articular fractures. Lunotriquetral (LT) ligament injuries with instability were present in 6.7% of intra-articular fractures. and in 13.3% of extra-articular fractures. Combined SL and LT injuries were present in 5.6% of intra-articular fracture. Preoperative radiographs correlated with TFCC injury. Patients with TFCC tears had greater shortening and dorsal angulation on the preoperative radiographs. Preoperative radiographs had no predictive value for interosseous ligament injury. Ligamentous injuries are commonly associated with both intra-articular and extra-articular distal radial fractures.

Pain and disability reported in the year following a distal radius fracture: A cohort study

BackgroundDistal radius fractures are a common injury that cause pain and disability. The purpose of this study was to describe the pain and disabilities experienced by patients with a distal radius fracture in the first year following fracture.MethodsA prospective cohort study of 129 patients with a fracture of the distal radius was conducted. Patients completed a Patient-rated Wrist Evaluation at their baseline clinic visit and at 2, 3, 6 and 12 months following their fracture. The frequency/severity of pain and disabilities reported was described at each time point.ResultsThe majority of patients experienced mild pain at rest and (very) severe high levels of pain with movement during the first two-months following distal radius fracture. This time is also associated with (very) severe difficulty in performing specific functional activities and moderate to severe difficulty in four domains of usual activity. The majority of recovery occurred within six-months, but symptoms persisted for a small minority of patients at one-year following fracture. Patients had the most difficulty with carrying ten pounds and pushing up from a chair. Resumption of usual personal care and household work preceded, and was more complete, than work and recreational participation.ConclusionsThis study demonstrated that the normal course of recovery following a distal radius fracture is one where severe symptoms subside within the first two-months and the majority of patients can be expected to have minimal pain and disability by six-months following fracture. This information can be used when planning interventions and assessing whether the progress of a patient is typical of other patients.

Patient versus injury factors as predictors of pain and disability six months after a distal radius fracture

A prospective cohort of 120 patients with distal radius fractures completed a baseline evaluation that determined their age, sex, education level, injury compensation status, AO fracture type, prereduction radial shortening, and postreduction radial shortening. Six months later patients self-reported pain and disability using the Patient-Rated Wrist Evaluation, and were tested for physical impairment (grip, wrist range of motion, and dexterity). Univariate and forward stepwise regression analyses agreed that the most influential predictor of pain and disability at 6 months was injury compensation. Patient education level and prereduction radial shortening also contributed predictive information (R squared = 25%). Wrist impairment was moderately correlated with patient reported pain and disability (r = 0.50). Both impairment and disability measures are required to fully describe outcomes. Further work is required to delineate additional factors that contribute to outcome.

Measurement of the scaphoid humpback deformity using longitudinal computed tomography: Intra- and interobserver variability using various measurement techniques

The intra- and interobserver variability of 3 techniques for measuring the humpback deformity of 37 scaphoids using longitudinal computed tomography was assessed. The 3 measuring techniques were the lateral intrascaphoid angle, the dorsal cortical angle, and the height-to-length ratio. The intraobserver reliability of the intrascaphoid angle was poor; the dorsal cortical angle was moderate to excellent, and the height-to-length ratio was excellent. The interobserver reliability of the intrascaphoid angle was poor to moderate, the dorsal cortical angle was moderate to excellent, and the height-to-length ratio was moderate to excellent. For all 3 observers, the intra- and interobserver reliability was the best for the height-to-length ratio and worst for the intrascaphoid angle. The height-to-length ratio is the most reproducible method of assessing the humpback deformity. Clinical correlation is required to establish whether the height-to-length ratio will be of value in predicting the outcome of fractures of the scaphoid.

Percutaneous A1 Pulley Release: A Cadaveric Study

Percutaneous A1 pulley release was performed on 17 fresh-frozen cadaveric hands with a 14-gauge angiocath needle. Each hand was then explored to assess the adequacy of release and the degree of injury to adjacent structures. Complete release of the A1 pulley was obtained in 45 of the 66 fingers and in 10 of the 17 thumbs. Significant injury to the flexor tendons was observed in two digits. All tendon injuries occurred along the line of the fibers. There were no digital nerve injuries. The release was within 2 mm of a thumb digital nerve in seven hands and the little finger ulnar digital nerve in two. In the thumb, the close proximity of the digital nerves makes percutaneous trigger digit release potentially hazardous. With the little finger held in abduction the risk of digital nerve injury or inadequate release is reduced. Percutaneous trigger finger release can be safely performed in the index, long, and ring fingers.

Longitudinal computed tomography of the scaphoid: a new technique

Computed tomography is increasingly utilized for the evaluation of scaphoid fracture, nonunion, and deformity. We have developed a new technique of positioning patients while performing longitudinal computed tomography of the scaphoid. With the wrist positioned in radial deviation and neutral flexion, greater patient comfort is provided and immobilization of the wrist is not required. A reproducible image can be obtained with attention to the alignment of the scanning plane to the longitudinal axis of the scaphoid on the scout image, and verified with the “target sign”. High resolution images, which clearly demonstrate the abnormalities of the scaphoid, can be produced even if the patient has a cast on the wrist or if there is hardware in situ.

Beta-catenin expression in Dupuytren's disease: potential role for cell–matrix interactions in modulating beta-catenin levels in vivo and in vitro

Dupuytrens disease (DD) is a superficial fibromatosis of the hand. Although the molecular mechanisms responsible for this disease are unknown, recent studies suggest that beta-catenin may be a key factor involved in fibromatosis. In this study, we analysed the in vivo and in vitro expression levels of beta-catenin in DD, using surgical specimens and primary cell lines. Although no somatic mutations (exon 3) of beta-catenin were detected, Western blot analysis revealed high levels of beta-catenin in diseased palmar fascia, and low to undetectable levels of beta-catenin in patient-matched normal palmar fascia. Immunohistochemistry analysis showed high levels of beta-catenin expression within the disease fascia, as well as cytoplasmic and nuclear accumulations of the protein. Immunoprecipitation of beta-catenin from seven patient lesions showed the protein to be tyrosine phosphorylated. Lastly, Western analysis of three patient-matched (disease and normal fascia) primary cell cultures showed significantly elevated levels of beta-catenin in disease cells cultured in three-dimensional collagen lattices. This is the first extensive in vivo and in vitro characterization of beta-catenin in DD, and the first to suggest that the extracellular matrix may play an important role in modulating beta-catenin stability in DD.

The palmar cutaneous branch of the median nerve and the palmaris longus tendon: A cadaveric study☆

The purpose of this study was to determine the frequency with which the palmar cutaneous branch of the median nerve passes through the palmaris longus tendon. Fifty-two wrists (27 cadavers) were dissected. In three wrists the palmaris longus tendon was absent. The palmar cutaneous branch was seen to course through the fibers of the palmaris longus in two specimens (different cadavers). The nerve passed through the tendon 1 and 1.5 cm proximal to its insertion into the palmar aponeurosis. In the presence of this anomaly the palmar cutaneous branch of the median nerve is at risk of injury during harvesting of the palmaris longus tendon for grafts. To avoid injury, we recommend transecting the tendon 2 cm proximal to its insertion into the palmar aponeurosis.

Load relaxation and forces with activity in hoffman external fixators: A clinical study in patients with Colles' fractures

A small-frame Hoffman external fixation bar instrumented with strain gauges to quantify bending and torsional forces was applied to 4 patients with a displaced metaphyseal fracture of the distal radius. Measurements were taken during surgery as well as at 1, 3, and 6 weeks after surgery during activities of daily living and hand therapy mobilization. Radiographs also were taken before and after reduction and at each subsequent visit. Force decay occurred after reduction of the fracture, averaging only 26% of the initial distraction forces by 5 minutes. These forces plateaued and did not significantly change over the subsequent 40-minute observation period. There was no correlation between carpal height index and the forces measured in the external fixator. Significant changes in external fixator forces were measured during activities of daily living and hand therapy mobilization, but these returned to baseline after the activities were performed. The most provocative activities studied were twisting a doorknob and lifting heavy objects. These activities should be performed with caution by patients with unstable distal radial fractures.