Roberta Lione

Treatment and posttreatment skeletal effects of rapid maxillary expansion studied with low-dose computed tomography in growing subjects

INTRODUCTION The aim of this study was to apply low-dose computed tomography (CT) to evaluate treatment and posttreatment effects produced by rapid maxillary expansion (RME) at the levels of the midpalatal suture and the pterygoid processes. METHODS A sample of 17 subjects (7 boys, 10 girls; mean age, 11.2 years) was analyzed. Multi-slice CT scans were taken before RME, at the end of the active expansion phase, and after a retention period of 6 months. Statistical analysis was performed with ANOVA for repeated measures with post-hoc tests. RESULTS The amounts of opening of the midpalatal suture during the active phase of expansion were 3.01, 2.17, and 1.15 mm for the anterior, middle, and posterior suture widths, respectively. Pterygoid width also showed a statistically significant increase (1.49 mm). In the postretention period, all transverse measurements had significant decreases except for pterygoid width. CONCLUSIONS At the end of the retention phase after RME therapy, the transverse width of the midpalatal suture was similar to the pretreatment width, whereas the width between the pterygoid processes was significantly increased.

Immediate and post-retention effects of rapid maxillary expansion investigated by computed tomography in growing patients

OBJECTIVE To determine by low-dose computed tomography (CT) protocol the dental and periodontal effects of rapid maxillary expansion (RME). MATERIALS AND METHODS The sample comprised 17 subjects (7 males and 10 females), with a mean age at first observation of 11.2 years. Each patient underwent expansion of 7 mm. Multislice CT scans were taken before rapid palatal expansion (T0), at the end of the active expansion phase (T1), and after a retention period of 6 months (T2). On scanned images, measurements were performed at the dental and periodontal levels. Mean differences between measurements at T0, T1, and T2 were examined through analysis of variance (ANOVA) for repeated measures with post-hoc tests. RESULTS All interdental transverse measurements were significantly increased at both T1 and T2 with respect to T0. In the evaluation of T0-T1 changes, periodontal measurements were significant on the buccal aspect of banded teeth with a reduction in alveolar bone thickness corresponding to the mesial (-0.5 mm; P < .05) and distal (-0.4 mm; P < .05) roots of the right first molar and to the mesial root of the left first molar (-0.3 mm; P < .05). In the evaluation of overall T0-T2 changes, the lingual bone plate thickness of both first molars was found to be significantly increased (+0.6 mm; P < .05). CONCLUSIONS RME therapy induces a significant increase in the transverse dimension of the maxillary arch in growing subjects without causing permanent injury to the periodontal bony support of anchoring teeth discernible on CT imaging.

Evaluation of maxillary arch dimensions and palatal morphology in mouth-breathing children by using digital dental casts

OBJECTIVE The aim of the present study was to analyze the variations of maxillary arch size and of palatal morphology in subjects with prolonged mouth-breathing due to allergic rhinitis when compared with a control group with normal breathing pattern by using a three-dimensional analysis on digital casts. METHODS 26 Caucasian children (19 females and 7 males) with a mean age of 8.5 years (SD 1.6 years) were selected according to the following criteria: mouth-breathing pattern due to allergic rhinitis, early mixed dentition, skeletal Class I relationship and prepubertal stage of cervical vertebral maturation. The study group was compared with a control group of 17 nasal breathing subjects (9 females; 8 males, mean age 8.5 years SD 1.7 years). For each subject an initial dental cast was taken and the upper arch was scanned by using a tridimensional scanner. On each digital model linear measurements were performed to analyze maxillary arch dimensions and palatal morphology. Significant between-group differences were tested with the Student t-test (p<0.05). RESULTS the transverse dimension of the upper arch was significantly smaller in subjects of the study group thus confirming the influence of oral breathing on skeletal development with a significant constriction of the whole palate. The study group showed a higher and sharper palatal vault at the level of second deciduous molars and of first permanent molars. CONCLUSIONS Children with mouth-breathing pattern showed a significant constriction of the maxillary arch and an increased palatal height when compared with subjects with normal breathing pattern.

Does rapid maxillary expansion induce adverse effects in growing subjects

OBJECTIVE To assess the scientific evidence that rapid maxillary expansion (RME) causes Adverse Effects on the midpalatal suture, vertical dimension, dental and periodontal structures in growing subjects. MATERIALS AND METHODS Electronic databases were searched for articles dated through December 2011. The quality of the studies was ranked on a 13-point scale in which 1 was the low end of the scale and 13 was the high end. RESULTS Thirty relevant articles were identified. The amount of midpalatal suture opening ranged from 1.6 to 4.3 mm in the anterior region and from 1.2 to 4.4 mm in the posterior region. At the end of the active phase, RME resulted in slight inferior movement of the maxilla (SN-PNS +0.9 mm; SN-ANS +1.6 mm), increased tipping of anchored teeth from 3.4° to 9.2° and bending of the alveolar bone from 5.1° to 11.3°. In the long term, RME did not modify the facial growth patterns, and no significant changes on dentoalveolar structures were observed. Of the 30 studies, 2 were medium-high quality, 8 were medium quality, and 20 were low quality. CONCLUSIONS RME always opened the midpalatal suture in growing subjects. The vertical changes were small and transitory. In the long-term evaluation, an uprighting of anchored teeth was observed and periodontal structures were not compromised.

Modifications of midpalatal sutural density induced by rapid maxillary expansion: A low-dose computed-tomography evaluation.

INTRODUCTION The aim of this study was to evaluate the density of the midpalatal suture as assessed by low-dose computed tomography (CT) before rapid maxillary expansion (RME) (T0), at the end of active expansion (T1), and after a retention period of 6 months (T2). METHODS The study sample comprised 17 prepubertal subjects (mean age, 11.2 years) with constricted maxillary arches and unilateral or bilateral posterior crossbite. The total amount of expansion was 7 mm in all subjects. Multi-slice low-dose CT scans were taken at T0, T1, and T2. On axial CT scanned images, 4 regions of interest (ROIs) were placed along the midpalatal suture (anterior [AS ROI] and posterior [PS ROI]) and in 2 regions of palatal bone (anterior and posterior). Density was measured in Hounsfield units. The Mann-Whitney U test and Friedman analysis of variance (ANOVA) with post-hoc test were used (P <0.05). RESULTS The densities in the AS and PS ROIs were significantly smaller than the reference bone densities before RME therapy. Both AS and PS ROIs showed significant decreases in density from T0 to T1, significant increases from T1 to T2, and no significant differences from T0 to T2. CONCLUSIONS The effective opening of the midpalatal suture by RME in prepubertal subjects was associated with a significant decrease in sutural density. The sutural density after 6 months of retention post-RME indicated reorganization of the midpalatal suture, since it showed values similar to the pretreatment ones.

The role of rapid maxillary expansion in the promotion of oral and general health

Rapid maxillary expansion (RME) is an effective orthopedic procedure that can be used to address problems concerned with the growth of the midface. This procedure also may produce positive side effects on the general health of the patient. The aim of the present consensus paper was to identify and evaluate studies on the changes in airway dimensions and muscular function produced by RME in growing patients. A total of 331 references were retrieved from a database search (PubMed). The widening of the nasal cavity base after midpalatal suture opening in growing patients allows the reduction in nasal airway resistance with an improvement of the respiratory pattern. The effects of RME on the upper airway, however, have been described as limited and local, and these effects become diminished farther down the airway, possibly as a result of soft-tissue adaptation. Moreover, limited information is available about the long-term stability of the airway changes produced by RME. Several studies have shown that maxillary constriction may play a role in the etiology of more severe breathing disorders such as obstructive sleep apnea (OSA) in growing subjects. Early orthodontic treatment with RME is able to reduce the symptoms of OSA and improve polysomnographic variables. Finally, early orthopedic treatment with RME also is beneficial to avoid the development of facial skeletal asymmetry resulting from functional crossbites that otherwise may lead to functional and structural disorders of the stomatognathic system later in life.

Palatal surface and volume in mouth-breathing subjects evaluated with three-dimensional analysis of digital dental casts - A controlled study

OBJECTIVE To compare the anatomical characteristics of the maxillary arch, identified as palatal surface area and volume, between mouth-breathing and nose-breathing subjects using a three-dimensional (3D) analysis of digital dental casts. METHODS Twenty-one Caucasian subjects (14 females and 7 males) with a mean age of 8.5 years [standard deviation (SD) 1.6 years] were selected according to the following criteria: mouth-breathing pattern due to allergic rhinitis, early mixed dentition, skeletal Class I relationship, and pre-pubertal stage of cervical vertebral maturation. This study group (SG) was compared with a control group (CG) of 17 nose-breathing subjects (9 females and 8 males, mean age: 8.5 years; SD: 1.7 years). For each subject, initial dental casts were taken and the upper arch was scanned using a 3D laser scanner. On each digital model, 3D measurements were performed to analyse maxillary arch morphology. Between-group differences were tested with the independent sample Students t-test (P < 0.05). RESULTS In mouth-breathing subjects, changes in physiological function of the upper respiratory tract resulted in skeletal adaptations of the maxillary arch. In the SG, both palatal surface area and volume were significantly smaller when compared with values of the CG. In particular, the palatal surface area and palatal volume were, respectively, 13.5 and 27.1 per cent smaller in the SG when compared to the CG. CONCLUSIONS Subjects with prolonged mouth breathing showed a significant reduction of the palatal surface area and volume leading to a different development of the palatal morphology when compared with subjects with normal breathing pattern.

Comparison and reproducibility of 2 regions of reference for maxillary regional registration with cone-beam computed tomography.

INTRODUCTION The aims of this study were to evaluate the differences between 2 regions of maxillary voxel-based registration and to test the reproducibility of the registration. METHODS Three-dimensional models were built for before-treatment (T1) and after-treatment (T2) based on cone-beam computed tomography images from 16 growing subjects. Landmarks were labeled in all T2 models of the maxilla, and voxel-based registrations were performed independently by 2 observers at 2 times using 2 reference regions. The first region, the maxillary region, included the maxillary bone clipped inferiorly at the dentoalveolar processes, superiorly at the plane passing through the right and left orbitale points, laterally at the zygomatic processes through the orbitale point, and posteriorly at a plane passing through the distal surface of the second molars. In the second region, the palate and infrazygomatic region had different posterior and anterior limits (at the plane passing through the distal aspects of the first molars and the canines, respectively). The differences between the registration regions were measured by comparing the distances between corresponding landmarks in the T2 registered models and comparing the corresponding x, y, and z coordinates from corresponding landmarks. Statistical analysis of the differences between the T2 surface models was performed by evaluating the means and standard deviations of the distances between landmarks and by testing the agreement between coordinates from corresponding landmarks (intraclass correlation coefficient and Bland-Altman method). RESULTS The means of the differences between landmarks from the palate and infrazygomatic region to the maxillary region 3-dimensional surface models at T2 for all regions of reference, times of registrations, and observer combinations were smaller than 0.5 mm. The intraclass correlation coefficient and the Bland-Altman plots indicated adequate concordance. CONCLUSIONS The 2 regions of regional maxillary registration showed similar results and adequate intraobserver and interobserver reproducibility values.

Three-Dimensional Evaluation of Masseter Muscle in Different Vertical Facial Patterns A Cross-Sectional Study in Growing Children

The aim of the present study was to analyze the anatomical three-dimensional (3D) characteristics of masseter muscle in growing subjects with different vertical patterns by using an ultrasound (US) method. The sample comprised 60 prepuberal subjects (33 males, 27 females) with a mean age of 11.5 ± 1.6 years with late mixed or permanent dentition and Class I molar and skeletal relationship. For each subject, a lateral cephalogram was required, and according to the mandibular plane angle (Frankfort horizontal plane/mandibular plane angle [FMA]), the subjects were divided into three groups of different underlying vertical facial patterns: brachyfacial: FMA < 22°, mesofacial: 22° ≤ FMA ≤ 28°, and dolichofacial: FMA > 28°. For each subject, an US scan was carried out to analyze the width, the thickness, the cross-sectional area, and the volume of the masseter muscle. Mean differences in measurements between vertical facial subgroups were contrasted by means of analysis of variance (ANOVA) with Tukey’s post hoc tests (p < 0.05). Measurements of the whole masseter in dolichofacial patients were significantly smaller when compared with brachyfacial and mesofacial individuals during relaxation and contraction. The volume of the masseter decreased significantly by 10% going from the brachyfacial group to the mesofacial group and from the mesofacial group to the dolichofacial group with no difference between the left and the right sides. A significant negative correlation was found between the US measurements and the divergency (FMA°). Ultrasound is a technique indicated in children for evaluating muscles of mastication in vivo. Growing patients with a dolichofacial vertical pattern present with a reduced dimension of the masseter when compared with brachyfacial and mesofacial subjects.

Three-dimensional densitometric analysis of maxillary sutural changes induced by rapid maxillary expansion

OBJECTIVE This prospective study evaluated the density of the midpalatal and transverse sutures as assessed by low-dose CT before rapid maxillary expansion (T0), at the end of active expansion (T1) and after a retention period of 6 months (T2). METHODS The study sample comprised 17 pre-pubertal subjects (mean age 11.2 years) with constricted maxillary arches. Total amount of expansion was 7 mm in all subjects. Multislice low-dose CT scans were taken at T0, T1 and T2. On the axial CT scanned images six regions of interest (ROIs) were placed along the midpalatal and transverse sutures and two in maxillary and palatal bony areas. Density was measured in Hounsfield units. Mann-Whitney U test and Friedman analysis of variance with post hoc tests were used (p < 0.05). RESULTS The three ROIs in the midpalatal suture showed a significant decrease in density from T0 to T1, a significant increase from T1 to T2 and a lack of statistically significant differences from T0 to T2. Both ROIs located in the transverse suture showed a significant decrease in density from T0 to T1, followed by a non-significant increase in density from T1 to T2. CONCLUSIONS At the end of the active phase of expansion a significant reduction in density along the midpalatal and transverse sutures was observed in all subjects. The sutural density of the midpalatal suture at T2 indicated reorganization of the midpalatal suture while the density along the transverse suture increased without reaching the pre-treatment values, possibly due to different morphology between midpalatal and transverse sutures.