Roberto J. Peña

Composition of HMW and LMW glutenin subunits and their effects on dough properties, pan bread, and noodle quality of chinese bread wheats

ABSTRACT Knowledge of composition of high molecular weight glutenin subunits (HMW-GS) and low molecular weight glutenin subunits (LMW-GS) and their associations with pan bread and noodle quality will contribute to genetically improving processing quality of Chinese bread wheats. Two trials including a total of 158 winter and facultative cultivars and advanced lines were conducted to detect the allelic variation at Glu-1 and Glu-3 loci by SDS-PAGE electrophoresis and to understand their effects on dough properties, pan bread, and dry white Chinese noodle (DWCN) quality. Results indicate that subunits/alleles 1 and null at Glu-A1, 7+8 and 7+9 at Glu-B1, 2+12 and 5+10 at Glu-D1, alleles a and d at Glu-A3, and alleles j and d at Glu-B3 predominate in Chinese germplasm, and that 34.9% of the tested genotypes carry the 1B/1R translocation (allelic variation at Glu-D3 was not determined because no significant effects were reported previously). Both variations at HMW-GS and LMW-GS/alleles and loci interactions co...

Variation in quality characteristics associated with some spring 1B/1R translocation wheats

Advanced lines (295) from CIMMYTs International Bread Wheat Screening Nursery, a large proportion of which carry the 1B/1R translocation, were examined in terms of their sodium dodecyl sulfate (SDS)-sedimentation volumes and Alveograph characteristics, as well as their dough mixing and bread-making properties. A significant quality trait variability was observed for all parameters evaluated. Comparison of sister lines with and without the 1B/1R translocation showed that variations in SDS-sedimentation volume. Alveograph characteristics, dough mixing and baking properties cannot be attributed exclusively to the presence of the 1B/1R translocation. Finally, the poor breadmaking properties, particularly dough stickiness, associated with one Mexican (Glennson 81) and two Australian (QT-2870 and SUN-89D) cultivars could not be confirmed when doughs were mixed under medium-speed mixing conditions. Therefore, the dough stickiness problem seems to be an attribute restricted mainly to high-speed mixing conditions characteristic of some modern breadmaking processes.

Allelic variation at the Glu-1 and Glu-3 loci, presence of the 1B.1R translocation, and their effects on mixographic properties in Chinese bread wheats

Allelic variations at the Glu-1 and Glu-3 loci play an important role in determining dough properties and bread-making quality. Two hundred and fifty-one cultivars and advanced lines from four major Chinese wheat-producing zones in the autumn-sown wheat regions were used to investigate the high-molecular-weight glutenin subunits (HMW GS) and low-molecular-weight glutenin subunit (LMW GS) composition controlled by the Glu-1 and Glu-3 loci, respectively, as well as the presence of the 1B.1R translocation, and to determine the association of storage protein composition with protein content, SDS sedimentation value, and dough-mixing properties measured by mixograph. Three, nine, and four allelic variations were present at Glu-A1, Glu-B1, and Glu-D1, respectively. Subunits 1, N, 7+8, 7+9, and 2+12 are the dominant HMW GS, with frequencies of 51.3, 39.4, 38.2, 45.0, and 59.8%, respectively. Five and eight allelic variations were present at the Glu-A3 and Glu-B3 loci (data of Glu-D3 were not available), Glu-A3a, Glu-A3d, Glu-B3j (presence of the 1B.1R translocation), and Glu-B3d are the dominant LMW GS, with frequencies of 37.1, 31.7, 44.6, and 20.3%, respectively. The frequencies of allelic variation at Glu-1 and Glu-3 differ greatly in different regions. The effects of HMW GS and LMW GS on SDS sedimentation value, mixing time, and mixing tolerance were significant at P = 0.01, with Glu-D1 and Glu-B3 showing the largest contributions to mixing time and mixing tolerance. Averaged data from two locations showed that the quality effects of glutenin loci could be ranked as Glu-B3 > Glu-B1 > Glu-A1 > Glu-D1 > Glu-A3 for SDS sedimentation value, Glu-D1 > Glu-B3 > Glu-A1 = Glu-B1 = Glu-A3 for mixing time, and Glu-D1 > Glu-B3 = Glu-B1 > Glu-A3 > Glu-A1 for mixing tolerance, respectively. The significant and negative effect of the 1B.1R translocation on dough properties was confirmed. It was concluded that the high frequency of undesirable HMW GS and LMW GS and the presence of the 1B.1R translocation are responsible for the weak gluten property of Chinese germplasm; hence, reducing the frequency of the 1B.1R translocation and integration of desirable subunits at Glu-1 and Glu-3 such as 1, 7+8, 14+15, 5+10, Glu-A3d, and Glu-B3d, could lead to the improvement of gluten quality in Chinese wheats.

Pan bread and dry white chinese noodle quality in chinese winter wheats

Improvements in pan bread quality and Chinese dry white noodle (DWCN) quality are the major breeding objectives in the north China winter wheat region. Eighty-one wheat cultivars and advanced lines were sown in two locations in the 2000–2001 season to evaluate the quality of winter wheat germplasm and investigate the association between pan bread quality and DWCN quality. Significant variability was observed for grain, pan bread, and DWCN quality attributes. Six cultivars and lines showed very good pan bread quality, 23 showed excellent DWCN quality in both locations, and the cultivars Yumai 34 and Sunstate showed superior quality for both food products. Protein content and grain hardness were significantly associated with pan bread quality, while the gluten quality-related parameters SDS-sedimentation value, Farinograph stability, and Extensograph maximum resistance, were significantly associated with pan bread quality score, and accounted for 59.3–72.3% of its variation. Yellow colour (b, CIE Lab) showed a strong negative association with pan bread and DWCN quality largely due to the strong and negative association between yellow colour and gluten strength parameters in this germplasm pool. Flour ash content and polyphenol oxidase (PPO) had a negative moderate effect on noodle colour, while protein content and grain hardness were negatively associated with noodle colour, appearance, and smoothness. The association between SDS-sedimentation volume, Farinograph stability, and Extensograph maximum resistance and DWCN score fitted a quadratic regression model, accounting for 31.0%, 39.0%, and 47.0% of the DWCN score, respectively. The starch pasting parameters, peak viscosity and paste breakdown, contributed positively to DWCN quality, with r = 0.57 and 0.55, respectively. Quality requirements for pan bread and DWCN differ in colour, gluten strength, and pasting viscosity. It is suggested that PPO, yellow pigment, SDS sedimentation volume, and peak viscosity are parameters that could be used to screen for DWCN quality in the early generations of a wheat-breeding program.

Characterization of low-molecular-weight glutenin subunit Glu-B3 genes and development of STS markers in common wheat (Triticum aestivum L.)

Low-molecular-weight glutenin subunit (LMW-GS) Glu-B3 has a significant influence on the processing quality of the end-use products of common wheat. To characterize the LMW-GS genes at the Glu-B3 locus, gene-specific PCR primers were designed to amplify eight near-isogenic lines and Cheyenne with different Glu-B3 alleles (a, b, c, d, e, f, g, h and i) defined by protein electrophoretic mobility. The complete coding regions of four Glu-B3 genes with complete coding sequence were obtained and designated as GluB3-1, GluB3-2, GluB3-3 and GluB3-4. Ten allele-specific PCR markers designed from the SNPs present in the sequenced variants discriminated the Glu-B3 proteins of electrophoretic mobility alleles a, b, c, d, e, f, g, h and i. These markers were validated on 161 wheat varieties and advanced lines with different Glu-B3 alleles, thus confirming that the markers can be used in marker-assisted breeding for wheat grain processing quality.

Wheat quality traits and quality parameters of cooked dry white chinese noodles

Dry white Chinese noodle (DWCN) is widely consumed in China, and genetic improvement of DWCN quality has become a major objective for Chinese wheat breeding programs. One hundred and four bread wheat cultivars and advanced lines, including 88from major Chinese wheat-producing areas, were sown in two locations for two years. Their DWCN quality, as evaluated by trained panelists, was studied to determine the relationship between wheat quality parameters and DWCN quality attributes. In general, the cultivars and advanced lines used in this study are characterized with acceptable protein content, but accompanied with weak-medium gluten strength and poor extensibility, and substantial variation is observed for all grain and DWCN quality characters. On average, Australia and USA wheat performed better DWCN quality than Chinese wheats. Simple correlation analysis indicated that both grain hardness and Farinograph water absorption were negatively associated with cooked DWCN color, appearance, smoothness, and taste. Flour whiteness and RVA peak viscosity was positively associated with all DWCN parameters, and their correlation coefficients (r) with DWCN score are 0.34 and 0.41, respectively. Their positive contributions to DWCN quality were mostly through improved color, appearance, smoothness, and taste. Farinograph mixing tolerance index (MTI) and softening were negatively associated with all DWCN quality parameters, and their correlation coefficients with DWCN score are –0.50 and–0.54, respectively. Further analysis indicated that association between protein content, Zeleny sedimentation value, Farinograph stability, and Extensograph extensibility, and DWCN score fit quadratic regression model significantly, with R2 0.12, 0.32, 0.22, and 0.20, respectively. The associations between Zeleny sedimentation value and DWCNs appearance and taste also fit quadratic regression model significantly. This suggests that to certain extent, increased protein content and gluten quality contribute positively to DWCN quality, mostly by improving palatability, elasticity, and stickiness. High flour whiteness, medium protein content, medium to strong gluten strength and good extensibility, and high starch peak viscosity are desirable for DWCN quality. Genetic improvement for flour whiteness, protein quality and starch paste viscosity would increase the DWCN quality of Chinese bread wheat cultivars.

Quantitative trait locus analysis of wheat quality traits

Milling and baking quality traits in wheat (Triticum aestivum L.) were studied by QTL analysis in the ITMI population, a set of 114 recombinant inbred lines (RILs) generated from a synthetic-hexaploid (W7985) × bread-wheat (Opata 85) cross. Grain from RILs grown in U.S., French, and Mexican wheat-growing regions was assayed for kernel-texture traits, protein concentration and quality, and dough strength and mixing traits. Only kernel-texture traits showed similar genetic control in all environments, with Opata ha alleles at the hardness locus Ha on chromosome arm 5DS increasing grain hardness, alkaline water retention capacity, and flour yield. Dough strength was most strongly influenced by Opata alleles at 5DS loci near or identical to Ha. Grain protein concentration was associated not with high-molecular-weight glutenin loci but most consistently with the Gli-D2 gliadin locus on chromosome arm 6DS. In Mexican-grown material, a 2DS locus near photoperiod-sensitivity gene Ppd1 accounted for 25% of variation in protein, with the ppd1-coupled allele associated with higher (1.1%) protein concentration. Mixogram traits showed most influence from chromosomal regions containing gliadin or low-molecular-weight glutenin loci on chromosome arms 1AS, 1BS, and 6DS, with the synthetic hexaploid contributing favorable alleles.Some RI lines showed quality values consistently superior to those of the parental material, suggesting the potential of further evaluating new combinations of alleles from diploid and tetraploid relatives, especially alleles of known storage proteins, for improvement of quality traits in wheat cultivars.

Comparison of low molecular weight glutenin subunits identified by SDS-PAGE, 2-DE, MALDI-TOF-MS and PCR in common wheat

BackgroundLow-molecular-weight glutenin subunits (LMW-GS) play a crucial role in determining end-use quality of common wheat by influencing the viscoelastic properties of dough. Four different methods - sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE), two-dimensional gel electrophoresis (2-DE, IEF × SDS-PAGE), matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) and polymerase chain reaction (PCR), were used to characterize the LMW-GS composition in 103 cultivars from 12 countries.ResultsAt the Glu-A3 locus, all seven alleles could be reliably identified by 2-DE and PCR. However, the alleles Glu-A3e and Glu-A3d could not be routinely distinguished from Glu-A3f and Glu-A3g, respectively, based on SDS-PAGE, and the allele Glu-A3a could not be differentiated from Glu-A3c by MALDI-TOF-MS. At the Glu-B3 locus, alleles Glu-B3a, Glu-B3b, Glu-B3c, Glu-B3g, Glu-B3h and Glu-B3j could be clearly identified by all four methods, whereas Glu-B3ab, Glu-B3ac, Glu-B3ad could only be identified by the 2-DE method. At the Glu-D3 locus, allelic identification was problematic for the electrophoresis based methods and PCR. MALDI-TOF-MS has the potential to reliably identify the Glu-D3 alleles.ConclusionsPCR is the simplest, most accurate, lowest cost, and therefore recommended method for identification of Glu-A3 and Glu-B3 alleles in breeding programs. A combination of methods was required to identify certain alleles, and would be especially useful when characterizing new alleles. A standard set of 30 cultivars for use in future studies was chosen to represent all LMW-GS allelic variants in the collection. Among them, Chinese Spring, Opata 85, Seri 82 and Pavon 76 were recommended as a core set for use in SDS-PAGE gels. Glu-D3c and Glu-D3e are the same allele. Two new alleles, namely, Glu-D3m in cultivar Darius, and Glu-D3n in Fengmai 27, were identified by 2-DE. Utilization of the suggested standard cultivar set, seed of which is available from the CIMMYT and INRA Clermont-Ferrand germplasm collections, should also promote information sharing in the identification of individual LMW-GS and thus provide useful information for quality improvement in common wheat.

Seed protein and isozyme variations in Triticum tauschii (Aegilops squarrosa).

Sixty Triticum tauschii (Aegilops squarrosa, 2n=2x=14, DD) accessions were evaluated for the variability of high-molecular-weight (HMW) glutenins, gliadins and isozymes of seed esterase, β-amylase and glucose-phosphate isomerase. Wide variability was observed for HMW-glutenins and gliadins. The implications of unique HMW-glutenin alleles for quality parameters are discussed. Isozyme evaluations indicated more variability for the Est-Dt5 locus as compared to the Est-D5 of bread-wheat. The polymorphism for β-Amy-Dt1 was less than that of β-Amy-D1. Similar to the bread-wheat situation, Gpi-Dt1 showed no polymorphism. The variability observed with the traits evaluated can be readily observed in T. turgidum x T. tauschii synthetic hexaploids (2n=6x=42, AABBDD) suggesting that T. tauschii accessions may be a rich source for enhancing the genetic variability of T. aestivum cultivars.

Glutenin subunit compositions and breadmaking quality characteristics of synthetic hexaploid wheats derived from Triticum turgidum × Triticum tauschii (coss.) Schmal Crosses

Abstract The Glu-B1, Glu-D1 and Glu-B3 encoded glutenin subunit compositions of a population of synthetic hexaploid wheats (AABBDD, 2n=6x=42), which was random for flour protein (FP), SDS-sedimentation (SDSS), Alveograph strength (W), the tenacity/extensibility (P/G) ratio and bread loaf volume (LV) were examined in this study. The synthetics were produced from various crosses involving several Triticum lurgidum cultivars and Triticum lauschii (coss.) Schmal accessions. The Glu-A1 null allele as well as three Glu-B1 (subunits 7 + 8, 6 + 8 and 20), 13 Glu-D1 and two Glu-B3 (LMW-1 and LMW-2) allelic variants were present in the synthetic population. Thirty-six different glutenin subunit combinations, including the Glu-B1, Glu-D1 and Glu-B3 encoded alleles, were observed. The synthetic hexaploids showed large variations for all quality parameters evaluated. All quality characteristics except one (P/G ratio, which showed no association with allelic variations at Glu-B3) were influenced by allelic variations at the Glu-B1 and Glu-B3 loci; subunits 6 + 8 and 7 + 8 showed significantly better quality effects than subunit 20. Low Mr glutenin subunits LMW-1 and LMW-2 showed both negative and positive quality effects. The Glu-D1 locus of T. tauschii contributed various alleles not found in bread wheat. The influence of new Glu-D1 alleles on the bread-making quality characteristics of the synthetic wheats could not be established, partly because there was a limited frequency of some of the alleles in the population, and partly because some synthetics, having a common Glu-D1 allele, showed quality differences associated with allelic variation at Glu-B1 and/or Glu-B3. Differential quality effects could be observed, however, among some Glu-D1 alleles. Synthetics derived from a common durum wheat source showed better overall quality characteristics and bread loaf volume when they possessed subunits 5 + 12 or 1·5 + 10 than when they had any other Glu-D1 encoded glutenin subunit.