Roberto Portillo

Chlorobenzene, chloroform, and carbon tetrachloride adsorption on undoped and metal-doped sol-gel substrates (SiO2, Ag/SiO2, Cu/SiO2 and Fe/SiO2).

Adsorption isotherms of chlorobenzene, chloroform and carbon tetrachloride vapors on undoped SiO(2), and metal-doped Ag/SiO(2), Cu/SiO(2) and Fe/SiO(2) substrates were measured in the temperature range of 398-593K. These substrates were prepared from a typical sol-gel technique in the presence of metal dopants that rendered an assortment of microporous-mesoporous solids. The relevant characteristic of these materials was the different porosities and micropore to mesopore volume ratios that were displayed; this was due to the effect that the cationic metal valence exerts on the size of the sol-gel globules that compose the porous solid. The texture of these SiO(2) materials was analyzed by X-ray diffraction (XRD), FTIR, and diverse adsorption methods. The pore-size distributions of the adsorbents confirmed the existence of mesopores and supermicropores, while ultramicropores were absent. The Freundlich adsorption model approximately fitted the chlorinated compounds adsorption data on the silica substrates by reason of a heterogeneous energy distribution of adsorption sites. The intensity of the interaction between these organic vapors and the surface of the SiO(2) samples was analyzed through evaluation of the isosteric heat of adsorption and standard adsorption energy; from these last results it was evident that the presence of metal species within the silica structure greatly affected the values of both the amounts adsorbed as well as of the isosteric heats of adsorption.

Influence of the Si/Al Framework Ratio on the Microporosity of Dealuminated Mordenite as Determined from N2 Adsorption

Abstract Dealuminated mordenites depicting SiO2/Al2O3 molar ratios in the range 10‐206 were analyzed through adsorption methods. The Type I‐IV hybrid shape of the N2 adsorption isotherms at 76 K on dealuminated mordenites indicated rather high micropore contents, though some amount of mesopores of slit‐like geometry was also present. Micropore volumes and sizes were measured through αS, t, and DA‐plots, as well as by the NLDFT approach. Results indicated that mordenite dealumination caused micropore opening and widening as well as the emergence of further slit‐like mesopores; even though a slight structural collapse toward creation of mesopore zones occurred at high dealumination extents.

Trapping of BTX compounds by SiO2, Ag-SiO2, Cu-SiO2, and Fe-SiO2 porous substrates.

Adsorption isotherms of BTX aromatic hydrocarbons (benzene, toluene, and p-xylene) on pristine (SiO2) and metal-doped (Ag-SiO2, Cu-SiO2 and Fe-SiO2) mesoporous and microporous substrates were measured and interpreted. These adsorbents were synthesized by the sol-gel procedure and their BTX sorption isotherms were obtained by the gas chromatographic technique (GC) at several temperatures in the range 423-593 K. The uptake amount of these hydrocarbon adsorptives on SiO2, Ag-SiO2, Cu-SiO2 and Fe-SiO2 mesoporous and microporous substrates was temperature-dependent. Additionally, the interaction of BTX molecules with the pore walls was evaluated by means of the corresponding isosteric heat of adsorption (qst), which was found to follow the next increasing sequence: qst (benzene)<qst (toluene)<qst (p-xylene). In general, the isosteric heat of adsorption of aromatic BTX compounds on microporous silica depicted an increasing tendency when the amount adsorbed was raised. This was a consequence of the existence of cohesive interactions (adsorbate-adsorbate) besides of the adhesive ones (adsorbate-adsorbent). The inclusion of silver or iron atoms within the SiO2 structure leads to an increased adsorbed amount of BTX molecules on the solid surface if compared with the Cu-SiO2 adsorbent. The adsorption of benzene, but not of toluene and p-xylene, molecules on pristine SiO2 is facilitated by the pore size of this substrate since this is the highest of all materials.

Trimesic acid dimethyl sulfoxide solvate: space group revision

The structure of the title solvate, C9H6O6·C2H6OS, was determined 30 years ago [Herbstein, Kapon & Wasserman (1978 ▶). Acta Cryst. B34, 1613–1617], with data collected at room temperature, and refined in the space group P21. The present redetermination, based on high-resolution diffraction data, shows that the actual space group is more likely to be P21/m. The crystal structure contains layers of trimesic acid molecules lying on mirror planes. A mirror plane also passes through the S and O atoms of the solvent molecule. The molecules in each layer are interconnected through strong O—H⋯O hydrogen bonds, forming a two-dimensional supramolecular network within each layer. The donor groups are the hydroxyls of the trimesic acid molecules, while the acceptors are the carbonyl or the sulfoxide O atoms.

Propiedades de adsorción en zeolitas con anillos de 8 miembros: I. microporosidad y superficie externa

In this work synthesis of LTA zeolite and its ionic exchange with inorganic chemical salts were studied. Likewise experimental results are reported about LTA zeolite external surface area by using the t-plot method. Physicochemical characterization of this zeolite was carried out by XRD, SEM, IR and nitrogen adsorption (76 K) techniques. LTA zeolite was synthesized hydrothermally starting from a hydrogel mixture composed by NaOH, Na[Al(OH)4] and Na2SiO4 in stoichiometric amounts determined by its crystallization field. An ion exchange was carried out in LTA zeolite with AgNO3, KCl, CaCl2, CdCl2, ZnCl2, CuCl2 and MnCl2 (0.1 N for all of them). The LTA zeolite exchanged with bivalent cations showed the best properties to nitrogen adsorption. X-Ray diffraction showed good crystallization. Scanning electronic microscopy showed very well defined crystals existence. Textural studies of exchanged zeolite with chemical salts mentioned before by nitrogen adsorption method indicated that it is possible to obtain LTA zeolite substrates which contain high porosity. A great number of micropores of these zeolites are supermicropores (0.7 - 2 nm, pore-diameter). Microporosity studies by α s-plots of Sing was carry out and revealed that in LTA zeolite exchanged with CaCl2 exist ultramicropores and supermicropores in which the primary and secondary filling is carried out respectively

Textural Properties of Hybrid Biomedical Materials Made from Extracts of Tournefortia hirsutissima L. Imbibed and Deposited on Mesoporous and Microporous Materials

Our research group has developed a group of hybrid biomedical materials potentially useful in the healing of diabetic foot ulcerations. The organic part of this type of hybrid materials consists of nanometric deposits, proceeding from the Mexican medicinal plant Tournefortia hirsutissima L., while the inorganic part is composed of a zeolite mixture that includes LTA, ZSM-5, clinoptilolite, and montmorillonite (PZX) as well as a composite material, made of CaCO3 and montmorillonite (NABE). The organic part has been analyzed by GC-MS to detect the most abundant components present therein. In turn, the inorganic supports were characterized by XRD, SEM, and High Resolution Adsorption (HRADS) of N2 at 76 K. Through this latter methodology, the external surface area of the hybrid materials was evaluated; besides, the most representative textural properties of each substrate such as total pore volume, pore size distribution, and, in some cases, the volume of micropores were calculated. The formation and stabilization of nanodeposits on the inorganic segments of the hybrid supports led to a partial blockage of the microporosity of the LTA and ZSM5 zeolites; this same effect occurred with the NABE and PZX substrates.

Bis[4-(diphenyl­methyl­eneamino)phen­yl]methanone

The title molecule, C39H28N2O, is a well known dendron used in the synthesis of phenylazomethine dendrimers. The central benzophenone core is twisted, as expected, due to hindrance between H atoms: the dihedral angle between core benzene rings is 54.49 (5)°, identical to that of the stable polymorph of benzophenone (56°). For the same reason, phenyl groups substituting imine C atoms make a large dihedral angle, although similar for each imine: 71.83 (6) and 67.64 (5)°. The six aromatic rings in the molecule thus seem to be quite randomly oriented, and such an arrangement is not favorable for efficient stacking interactions in the crystal. The same behaviour is observed in the vast majority of diphenylimino-containing organics. The low triclinic crystal symmetry may be a consequence of these features.

(S)-(+)-1-(1-Naphth­yl)-1-(2-thienylmethyl­ene)ethyl­amine

The title chiral imine, C17H15NS, has been obtained via a direct synthesis route. The imine group displays the common E configuration, and is almost coplanar with the thiophene heterocycle; the dihedral angle between the C=N—C group and the thiophene ring is 5.1 (8)°. In contrast, the naphthyl group makes an angle of 83.79 (13)° with the thiophene ring. The observed solid-state molecular conformation is suitable for the use of this molecule as an N,S-bidentate Schiff base ligand. The molecular packing features double C—H⋯π interactions between naphthyl groups of neighboring molecules, which form chains in the [100] direction. The crystal structure is further stabilized by a short C—H⋯π contact involving the methyl group and one ring of a naphthyl group. The resulting two-dimensional network is completed by a weak intermolecular C—H(imine)⋯π(thiophene) interaction.

Nanoporosity of MCM-41 Materials and Y-Zeolites Created by Deposition of Tournefortia hirsutissima L. Plant Extract

Hybrid materials based on MCM-41 silica and Y-zeolites with a variable Si/Al ratio and an appropriate countercationic composition were prepared by impregnating inorganic substrates with an organic extract. The organic phase was previously characterized by GC-MS and IRTF, while XRD, SEM, TEM, N2-physisorption, and TPD of NH3 were used to analyze the selected inorganic supports. The effect of size- and shape-selectivity was manifested in MCM-41 and Y-zeolites. Texture results confirm that the extract containing relatively large branched organic molecules is deposited in the internal voids of MCM-41 material and on the outer area of Y-zeolites. In the case of Y-zeolites, the results demonstrate the effect of the SiO2/ molar ratio and countercations on the textural properties of the samples.

(S)-(–)-1-(4-Methyl­phen­yl)ethyl­ammonium chloride

In the chiral title salt, C9H14N+·Cl−, cations and anions are held together by N—H⋯Cl hydrogen bonds, forming a one-dimensional network in the crystal structure.