Roberto Rongo

Evaluation of surface roughness of orthodontic wires by means of atomic force microscopy

OBJECTIVE To compare the surface roughness of different orthodontic archwires. MATERIALS AND METHODS Four nickel-titanium wires (Sentalloy(®), Sentalloy(®) High Aesthetic, Titanium Memory ThermaTi Lite(®), and Titanium Memory Esthetic(®)), three β-titanium wires (TMA(®), Colored TMA(®), and Beta Titanium(®)), and one stainless-steel wire (Stainless Steel(®)) were considered for this study. Three samples for each wire were analyzed by atomic force microscopy (AFM). Three-dimensional images were processed using Gwiddion software, and the roughness average (Ra), the root mean square (Rms), and the maximum height (Mh) values of the scanned surface profile were recorded. Statistical analysis was performed by one-way analysis of variance (ANOVA) followed by Tukeys post hoc test (P < .05). RESULTS The Ra, Rms, and Mh values were expressed as the mean ± standard deviation. Among as-received archwires, the Stainless Steel (Ra  =  36.6 ± 5.8; Rms  =  48 ± 7.7; Mh  =  328.1 ± 64) archwire was less rough than the others (ANOVA, P < .05). The Sentalloy High Aesthetic was the roughest (Ra  =  133.5 ± 10.8; Rms  =  165.8 ± 9.8; Mh  =  949.6 ± 192.1) of the archwires. CONCLUSIONS The surface quality of the wires investigated differed significantly. Ion implantation effectively reduced the roughness of TMA. Moreover, Teflon(®)-coated Titanium Memory Esthetic was less rough than was ion-implanted Sentalloy High Aesthetic.

Effects of intraoral aging on surface properties of coated nickel-titanium archwires

OBJECTIVE To evaluate the effects of intraoral aging on surface properties of esthetic and conventional nickel-titanium (NiTi) archwires. MATERIALS AND METHODS Five NiTi wires were considered for this study (Sentalloy, Sentalloy High Aesthetic, Superelastic Titanium Memory Wire, Esthetic Superelastic Titanium Memory Wire, and EverWhite). For each type of wire, four samples were analyzed as received and after 1 month of clinical use by an atomic force microscope (AFM) and a scanning electronic microscope (SEM). To evaluate sliding resistance, two stainless steel plates with three metallic or three monocrystalline brackets, bonded in passive configuration, were manufactured; four as-received and retrieved samples for every wire were pulled five times at 5 mm/min for 1 minute by means of an Instron 5566, recording the greatest friction value (N). Data were analyzed by one-way analysis of variance and by Students t-test. RESULTS After clinical use, surface roughness increased considerably. The SEM images showed homogeneity for the as-received control wires; however, after clinical use esthetic wires exhibited a heterogeneous surface with craters and bumps. The lowest levels of friction were observed with the as-received Superelastic Titanium Memory Wire on metallic brackets. When tested on ceramic brackets, all the wires exhibited an increase in friction (t-test; P < .05). Furthermore, all the wires, except Sentalloy, showed a statistically significant increase in friction between the as-received and retrieved groups (t-test; P < .05). CONCLUSION Clinical use of the orthodontic wires increases their surface roughness and the level of friction.

Dental and skeletal effects of palatal expansion techniques: a systematic review of the current evidence from systematic reviews and meta-analyses

The aim was to assess the quality and to summarise the findings of the Systematic Reviews (SRs) and Meta-Analyses (MAs) on the dental and skeletal effects of maxillary expansion. Electronic and manual searches have been independently conducted by two investigators, up to February 2015. SRs and MAs on the dentoalveolar and skeletal effects of fixed expanders were included. The methodological quality was assessed using the AMSTAR (A Measurement Tool to Assess Systematic Reviews). The design of the primary studies included in each SR/MA was assessed with the LRD (Level of Research Design scoring). The evidence for each outcome was rated applying a pre-determined scale. Twelve SRs/MAs were included. The AMSTAR scores ranged from 4 to 10. Two SRs/MAs included only RCTs. The current findings from SRs/MAs support with high evidence a significant increase in the short-term of maxillary dentoalveolar transversal dimensions after Rapid Maxillary Expansion (RME). The same effect is reported with moderate evidence after Slow Maxillary Expansion (SME). However, there is moderate evidence of a non-significant difference between the two expansion modalities concerning the short-term dentoalveolar effects. With both RME and SME, significant increase of skeletal transversal dimension in the short-term is reported, and the skeletal expansion is always smaller than the dentoalveolar. Even though dental relapse to some extent is present, long-term results of the dentoalveolar effects show an increase of the transversal dimension, supported by moderate evidence for RME and low evidence for SME. Skeletal long-term effects are reported only with RME, supported by very low evidence.

Three-dimensional evaluation of the relationship between jaw divergence and facial soft tissue dimensions

OBJECTIVE To evaluate the relationship between mandibular divergence and vertical and transverse dimensions of the face. MATERIALS AND METHODS A sample was recruited from the orthodontic clinic of the University of Otago, New Zealand. The recruited participants (N  =  60) were assigned to three different groups based on the mandibular plane angle (hyperdivergent, n  =  20; normodivergent, n  =  20; and hypodivergent, n  =  20). The sample consisted of 31 females and 29 males, with a mean age of 21.1 years (SD ± 5.0). Facial scans were recorded for each participant using a three-dimensional (3D) white-light scanner and then merged to form a single 3D image of the face. Vertical and transverse measurements of the face were assessed from the 3D facial image. RESULTS The hyperdivergent sample had a significantly larger total and lower anterior facial height than the other two groups (P < .05), although no difference was found for the middle facial height (P > .05). Similarly, there were no significant differences in the transverse measurements of the three study groups (P > .05). Both gender and body mass index (BMI) had a greater influence on the transverse dimension. CONCLUSIONS Hyperdivergent facial types are associated with a long face but not necessarily a narrow face. Variations in facial soft tissue vertical and transversal dimensions are more likely to be due to gender. Body mass index has a role in mandibular width (GoGo) assessment.

Effects of muscle pain induced by glutamate injections during sustained clenching on the contraction pattern of masticatory muscles.

AIMS To evaluate the contraction pattern of masticatory muscles during sustained clenching tasks with or without experimental pain induced by glutamate injection into the masseter muscle. It was hypothesized that acute muscle pain could induce compensatory changes in the electromyographic (EMG) activity of the masticatory muscles. METHODS Fifteen volunteers (seven males, mean age ± SD = 29.7 ± 1.1 years; eight females, mean age ± SD = 23.5 ± 1.2 years) were recruited in a crossover experimental study. All subjects participated in two randomized 20-minute experimental sessions. Each subject was asked to clench at 25% of the maximum voluntary contraction (MVC). After 10 minutes, isotonic saline or glutamate was injected in random order into the right masseter. EMG activity (root mean square [RMS] and mean power frequency [MPF]) was assessed in the masseter and anterior temporalis muscles on both sides. Pain and fatigue were assessed by 0-10 numeric rating scales (NRS) every minute. Differences between conditions (isotonic saline vs glutamate) for all the outcome parameters were analyzed by using a mixed effect model. RESULTS The EMG activity of the masticatory muscles and pain and fatigue scores were not dependent on isotonic saline/glutamate injection (all P > .05). The RMS in the temporalis and masseter muscles increased with time (right masseter P = 0.001, left masseter P = .004, right temporalis P = .22, left temporalis P = .006), whereas the MPF decreased (right masseter P = .0001, left masseter P < .0001, right temporalis P = .51, left temporalis P = .0005). Scores for fatigue and pain increased during the experimental sessions (all P < .05). CONCLUSION Intramuscular injection of glutamate caused more pain than isotonic saline but did not affect the contraction pattern of the masticatory muscles during a sustained clenching task. This finding strongly suggests the adaptive capacity of the stomatognathic system in the presence of acute nociceptive inputs.

Skeletal and dental effects of Class III orthopaedic treatment: a systematic review and meta-analysis

To summarise the skeletal, dental and soft tissue effects of orthopaedic treatment on growing skeletal class III patients compared with a concurrent untreated similar control group and to evaluate whether the design of the primary studies may affect the results. A literature search was performed up to the end of February 2016. No restrictions were applied concerning language and appliances. Once the quality score was assessed, a meta-analysis was performed for the appliances used in more than three studies. A moderator analysis for study design was performed. The level of evidence was evaluated by means of the Grades of Recommendation, Assessment, Development and Evaluation (GRADE) tool. The search resulted in 21 papers. The quality of most of the studies was medium. Each study reported skeletal sagittal improvement and overjet correction. Fourteen studies reported a significant increase in lower facial height. Follow-up data showed slight relapses in about 15% of patients. Meta-analyses were performed for the facemask and chin cup. The two appliances were efficient for correcting the sagittal discrepancy, increasing the divergence. In the analysis for study design, the retrospective studies showed a more efficient appliance than RCTs for 6 of 13 variables. The level of evidence was between very low and moderate. There is very low to low evidence that orthopaedic treatment is effective in the correction of Class III skeletal discrepancies and moderate evidence for the correction of the overjet. A common side effect is mandibular clockwise rotation in older subjects.

Does clinical experience affect the reproducibility of cervical vertebrae maturation method

OBJECTIVE To assess interobserver and intraobserver reproducibility of the cervical vertebrae maturation method (CVMM) among three panels of judges with different levels of orthodontic experience (OE). MATERIALS AND METHODS Fifty individual lateral cephalograms of good quality with complete visualization of cervical vertebrae 1 to 4 were selected. Thirty clinicians, divided according to their OE into three groups (junior group, JU, OE ≤ 1 year; postgraduate group, PG, 2 ≤ OE ≤ 4 years; specialist group, SP, OE ≥ 7 years), evaluated the cephalograms in two sessions (T1 and T2) at 3 weeks apart. Kendalls W and weighted Cohens kappa (κ) coefficients were performed to assess interobserver and intraobserver agreement. The level of significance was set as P < .05. For both the interobserver and the intraobserver datasets, the percentage of perfect agreement (PPA) and the number of stages apart for each disagreement were calculated. RESULTS Kendalls W at T1 was SP  =  0.61, PG  =  0.70, and JU  =  0.87; at T2 it was SP  =  0.78, PG  =  0.85, and JU  =  0.86. The percentage of total interobserver perfect agreement (Inter-PPA) was 42.3% at T1 and 46.3% at T2. The JU group had the highest Cohens κ coefficient at 0.78, while the PG and SP had coefficients of 0.64 each. The percentage of total intraobserver perfect agreement (Intra-PPA) was 54.2%. CONCLUSIONS The reproducibility of the method was not improved by the level of orthodontic experience. The group with the lowest level of orthodontic experience had the best performance.

Impact of skeletal divergence on oral health-related quality of life and self-reported jaw function

Objective To investigate the differences in oral health-related quality of life (OHRQoL) and self-reported jaw function between patients with hyperdivergent and normodivergent facial types. Methods Eighty patients with a distinctively hyperdivergent facial type (mandibular plane angle greater than 2 standard deviations, or 42°) and 80 controls were individually matched according to age, sex, ethnicity, and treatment stage. Data were collected using self-report questionnaires such as the Oral Health Impact Profile (OHIP-14) and Jaw Functional Limitation Scale (JFLS-8). Results The mean age of the patients was 17.2 ± 4.6 years (range, 12–9 years), with most (65.0%) being female and of New Zealand European origin (91.3%). Individuals with hyperdivergent facial types had higher overall and social domain scores on the OHIP-14 (p < 0.05) than did the ones with normodivergent facial types. However, the intergroup differences in JFLS-8 scores were not significant (p > 0.05). Conclusions Jaw function appears to be similar in individuals with hyperdivergent and normodivergent facial morphologies. However, those with hyperdivergent facial types are more likely to self-report poorer OHRQoL than are those with normal faces, especially in relation to social aspects.

Erratum to: Evaluation of masticatory muscle activity in patients with unilateral posterior crossbite before and after rapid maxillary expansion

Objectives The relationship between unilateral posterior crossbite (UPCB) and the possible asymmetric activation of the jaw muscles in children is still under debate. This study aimed at evaluating the jaw muscle activity of children with UPCB before and after rapid maxillary expansion (RME) by means of surface electromyography and a standardized sampling protocol. Subjects and methods Twenty-nine children with UPCB (UPCB-group, mean age 9.6 ± 1.6 years) and 40 UPCB-free controls (Control-group, 10.5 ± 1.1) were recruited. The activity of the left and right anterior temporalis (AT) and superficial masseter muscles (MM) was recorded during maximum voluntary clenching and a chewing task (T0). In the UPCB-group, data were collected, also, after the correction of the UPCB with RME (T1) and 6 months later (T2), without any further treatment. Electromyographic indices comparing the activity of paired muscle were computed via software to estimate the extent of asymmetric AT and MM activity. Paired and unpaired t-test or Wilcoxon-signed rank and Mann-Whitney U test, ANOVA or Friedman test and chi-squared test were used in the statistical analysis. Results Both groups presented with asymmetric activity of the muscles, which did not differ between groups (T0, all P > 0.05). The treatment determined a decrease in muscular activity (T1, P = 0.040), and a more asymmetric pattern of muscle activation during chewing (T1, P = 0.040), which returned similar to baseline values at T2 (all P > 0.05). Conclusions UPCB does not contribute to an asymmetric activation of AT and MM during functional tasks. The treatment of UPCB by RME did not determine a more symmetric activity of the assessed muscles.

Late-Developing Supernumerary Premolars: Analysis of Different Therapeutic Approaches

This case series describes the different potential approaches to late-developing supernumerary premolars (LDSP). LDSP are supernumerary teeth (ST) formed after the eruption of the permanent dentition; usually they develop in the premolar region of the upper and lower jaw. The choice to extract or to monitor the LDSP depends on many factors and has to be carefully planned due to the several risks that either the monitoring or the extraction could provoke. These four cases of LDSP showed different treatment plan alternatives derived from a scrupulous assessment of the clinical and radiographic information.