Roberto Ruiz-Caro

Characterization and Dissolution Study of Chitosan Freeze-Dried Systems for Drug Controlled Release

Freeze-dried systems (L) comprising chitosan (CS) and caffeine (CAF) have been developed for oral administration. Different proportions of CS and CAF have been used in the preparation of the systems. Hot stage microscopy (HSM), differential scanning calorimetry (DSC) and X-ray diffraction powder have been used to characterize the systems prepared. X-ray diffraction patterns showed that there were no interactions between CAF and CS molecules within the freeze-dried systems and the crystallinity of CAF was decreased. Swelling and dissolution tests were carried out in two different media (demineralized water and pH progressive medium) in order to establish their influence over CAF/CS system behaviour. Characteristic swelling behaviour of freeze-dried CS systems (imbibition and dissolution processes) was influenced by the proportions of CS and CAF in the formulations, and by the nature of the medium due to the pH-dependent solubility of CS. Release of CAF from lyophilized systems was conditioned by the swelling process and it should be possible to obtain a CAF/CS binary system with a specific time for total drug release including concrete proportions of both components. Furthermore, the freeze-drying process allowed us to obtain feasible systems for controlled release of CAF until the total amount of drug was released.

Chitosan and Kappa-Carrageenan Vaginal Acyclovir Formulations for Prevention of Genital Herpes. In Vitro and Ex Vivo Evaluation.

Vaginal formulations for the prevention of sexually transmitted infections are currently gaining importance in drug development. Polysaccharides, such as chitosan and carrageenan, which have good binding capacity with mucosal tissues, are now included in vaginal delivery systems. Marine polymer-based vaginal mucoadhesive solid formulations have been developed for the controlled release of acyclovir, which may prevent the sexual transmission of the herpes simplex virus. Drug release studies were carried out in two media: simulated vaginal fluid and simulated vaginal fluid/simulated seminal fluid mixture. The bioadhesive capacity and permanence time of the bioadhesion, the prepared compacts, and compacted granules were determined ex vivo using bovine vaginal mucosa as substrate. Swelling processes were quantified to confirm the release data. Biocompatibility was evaluated through in vitro cellular toxicity assays, and the results showed that acyclovir and the rest of the materials had no cytotoxicity at the maximum concentration tested. The mixture of hydroxyl-propyl-methyl-cellulose with chitosan- or kappa-carrageenan-originated mucoadhesive systems that presented a complete and sustained release of acyclovir for a period of 8–9 days in both media. Swelling data revealed the formation of optimal mixed chitosan/hydroxyl-propyl-methyl-cellulose gels which could be appropriated for the prevention of sexual transmission of HSV.

Influence of Chitosan Swelling Behaviour on Controlled Release of Tenofovir from Mucoadhesive Vaginal Systems for Prevention of Sexual Transmission of HIV

The main challenges facing efforts to prevent the transmission of human immunodeficiency virus (HIV) are the lack of access to sexual education services and sexual violence against young women and girls. Vaginal formulations for the prevention of sexually transmitted infections are currently gaining importance in drug development. Vaginal mucoadhesive tablets can be developed by including natural polymers that have good binding capacity with mucosal tissues, such as chitosan or guar gum, semisynthetic polymers such as hydroxypropylmethyl cellulose, or synthetic polymers such as Eudragit® RS. This paper assesses the potential of chitosan for the development of sustained-release vaginal tablets of Tenofovir and compares it with different polymers. The parameters assessed were the permanence time of the bioadhesion—determined ex vivo using bovine vaginal mucosa as substrate—the drug release profiles from the formulation to the medium (simulated vaginal fluid), and swelling profiles in the same medium. Chitosan can be said to allow the manufacture of tablets that remain adhered to the vaginal mucosa and release the drug in a sustained way, with low toxicity and moderate swelling that ensures the comfort of the patient and may be useful for the prevention of sexual transmission of HIV.

Historical development of vaginal microbicides to prevent sexual transmission of HIV in women: from past failures to future hopes

Infection with human immunodeficiency virus (HIV) remains a global public health concern and is particularly serious in low- and middle-income countries. Widespread sexual violence and poverty, among other factors, increase the risk of infection in women, while currently available prevention methods are outside the control of most. This has driven the study of vaginal microbicides to prevent sexual transmission of HIV from men to women in recent decades. The first microbicides evaluated were formulated as gels for daily use and contained different substances such as surfactants, acidifiers and monoclonal antibodies, which failed to demonstrate efficacy in clinical trials. A gel containing the reverse transcriptase inhibitor tenofovir showed protective efficacy in women. However, the lack of adherence by patients led to the search for dosage forms capable of releasing the active principle for longer periods, and hence to the emergence of the vaginal ring loaded with dapivirine, which requires a monthly application and is able to reduce the sexual transmission of HIV. The future of vaginal microbicides will feature the use of alternative dosage forms, nanosystems for drug release and probiotics, which have emerged as potential microbicides but are still in the early stages of development. Protecting women with vaginal microbicide formulations would, therefore, be a valuable tool for avoiding sexual transmission of HIV.

Drug kinetics release from Eudragit – Tenofovir@SiOC tablets

A novel drug release system has been obtained in form of tablets from Eudragit® RS and tenofovir loaded on porous silicon oxycarbide glasses (SiOC). Active carbon (AC) and mesoporous silica (MCM-41) have also been used for comparative purposes. The porous silicon oxycarbide presents a bimodal mesopore size distribution that is maintained after functionalization with amino groups. We have studied the adsorption kinetics and adsorption equilibrium when the materials are loaded with tenofovir and, in all cases, pseudo-second order kinetics and Langmuir isotherm have been revealed as the most representative models describing the kinetic and thermodynamic parameters. Besides, the tenofovir adsorption on these materials turns out to be a favorable process. In vitro release of tenofovir has been studied in simulated vaginal medium by applying different release models. Continuous tenofovir release for >20days has been obtained for the SiOC material functionalized with amine groups. We concluded that the drug release occurs in two steps that involve a drug diffusion step through the material pores and diffusion through the swollen polymer. The interactions between the tenofovir drug and de amine groups of the functionalized silicon oxycarbide also play an important role in the release process.

Pectin/anhydrous dibasic calcium phosphate matrix tablets for in vitro controlled release of water-soluble drug.

Different pectin/anhydrous dibasic calcium phosphate (ADCP) matrix tablets have been developed in order to obtain controlled release of a water-soluble drug (theophylline). Swelling, buoyancy and dissolution studies have been carried out in different aqueous media (demineralized water, progressive pH medium, simulated gastric fluid, simulated intestinal fluid and simulated colonic fluid), to characterize the matrix tablets. When the pectin/ADCP ratio was ≥0.26 (P1, P2, P3 and P4 tablets) a continuous swelling and low theophylline dissolution rate from the matrices were observed. So, pectin gel forming feature predominated over the ADCP properties, yielding pH-independent drug release behavior from these matrices. On the contrary, pectin/ADCP ratios ≤0.11 (P5 and P6 tablets) allowed to achieve drug dissolution pH dependent. Consequently, the suitable selection of the pectin/ADCP ratio will allow to tailor matrix tablets for controlled release of water-soluble drugs in a specific manner in the gastrointestinal tract.

Optimization of tenofovir release from mucoadhesive vaginal tablets by polymer combination to prevent sexual transmission of HIV

The use of sustained-release mucoadhesive vaginal tablets of antiretroviral drugs as microbicidal formulations can be an effective strategy for reducing the sexual transmission of HIV from men to women, which is a main problem particularly in low- and middle-income countries. Different polymers (hydroxypropylmethyl cellulose (HPMC), chitosan, guar gum and Eudragit® RS) have proven some good features for this purpose. At this work, these polymers have been combined in pairs in different proportions to enhance the advantages offered by each one individually. The in vitro release of tenofovir from the matrices, ex vivo mucoadhesive capacity (evaluated on vaginal mucosa) and the degree of swelling in simulated vaginal fluid have been assessed. A multimodal pore size distribution is observed in porosimetry studies -carried out with swelling witnesses-, due to the contribution of polymers with different swelling behaviour to the pore formation, and it is corroborated by scanning electron microscopy. X-ray diffraction technique confirms the changes in crystallinity of the formulation after swelling. We can report that the combination of HPMC and chitosan in the same formulation may be useful for the prevention of sexual transmission of HIV, since tablets can be obtained that remain adhered to the vaginal mucosa for 96h, so the drug is released in a sustained manner for 72h. When the formulation contains more chitosan than HPMC the swelling is moderate, making it more comfortable for women to apply.

In vitro Evaluation of Acyclovir/Chitosan Floating Systems

Chitosan (CS) floating lyophilized formulations (L) for gastric drug delivery of acyclovir (ACV) have been developed. The freeze-dried formulations were obtained from acidic aqueous suspensions prepared with different ACV/CS ratios. No changes in ACV crystallinity were observed during X-ray diffraction powder studies as a consequence of the manufacturing process. Considering that fed and fasted states modified the intragastric pH, swelling and in vitro dissolution studies were carried out in different acidic media (0.1 M HCl and progressive pH medium) in order to understand the influence of these physiological states on ACV/CS formulations. Swelling behavior of the floating lyophilized formulations was dependent on CS and ACV proportions within L and on medium nature due to pH dependent CS solubility. Furthermore, no interactions between ACV and CS were detected in solid state according to the X-ray studies. In vitro dissolution of ACV from L was influenced by the swelling behavior. However, it is feasible to optimize the ACV/CS ratios to achieve a desired formulation that releases the total quantity of ACV at a specific time. Moreover, floatability was assessed by buoyancy tests. The results demonstrated that the freeze-drying process achieved effective floating systems capable of remaining within the stomach while the total amount of ACV is released from L.

Improvement of Tenofovir vaginal release from hydrophilic matrices through drug granulation with hydrophobic polymers

&NA; Sustained‐release vaginal microbicides hold out great hope for the prevention of sexual transmission of HIV from men to women. Tenofovir (TFV) –an antiretroviral drug– sustained‐release vaginal compacts combining two release control systems (by drug‐loading granules with hydrophobic polymers and incorporating them in a hydrophilic matrix) are proposed in this work as a possible microbicide. The polymers used for the drug granules are Eudragit® RS (ERS), an acrylic derivative, and Zein, a maize protein. The hydrophilic matrix is composed of a mixture of hydroxypropylmethyl cellulose (HPMC) and chitosan (CH). The thermal, microscopic, spectrophotometric and X‐ray diffraction analysis showed that the drug was not altered during the granulation process. Studies of TFV release, swelling and ex vivo mucoadhesion were subsequently performed on simulated vaginal fluid. The formulation whereby TFV is granulated using twice its weight in ERS, and then including these granules in a matrix in which the CH predominates over HPMC, allows the sustained release of TFV for 144 h, mucoadhesion to the vaginal mucosa for 150 h and a moderate swelling, making it the most suitable formulation of all those studied. These compacts would therefore offer women protection against the sexual acquisition of HIV. Graphical abstract Figure. No caption available.

Chemical oxidation of silicon oxycarbide ceramics for advanced drug delivery systems

Abstract Silicon oxycarbide particles were subjected to chemical oxidation processes to incorporate carbonyl and carboxylic functionalities on their surfaces. These materials were subjected to in vitro tests to determine their adsorption and release capabilities of the antiretroviral drug molecule acyclovir. The spectroscopic characterization revealed the distribution of the functionalities in the different nanophases contained within the silicon oxycarbide structure. This selective distribution in either the carbon or the silicon oxycarbide phase leads to a differential charge availability that in fact is responsible for the adsorption of the drug molecule on the surface of the particles. This adsorption occurs via donor–acceptor interactions with no chemical bonds involved in the drug delivery system.