Rocío Castro-Ríos

Solid‐Phase Microextraction Followed by High‐Performance Liquid Chromatography with Fluorimetric and UV Detection for the Determination of Polycyclic Aromatic Hydrocarbons in Water

Abstract We have developed a solid‐phase microextraction procedure for polycyclic aromatic hydrocarbons. A simplex experimental design was employed to optimize the process. A polydimethylsiloxane/divinylbenzene fiber was selected. The optimum conditions were: an extraction step in the immersion mode, over a period of 60 min at 70°C using high‐speed stirring, and an 8 min desorption step using acetonitrile (90 µl). Linear relationships were obtained for all compounds, except for naphthalene. Our method showed a good precision and accuracy with a detection limit between 0.005 and 0.306 µg l−1. Our method was used to detect PAHs in real water samples.

New temperature-assisted ionic liquid-based dispersive liquid–liquid microextraction method for the determination of glyphosate and aminomethylphosphonic acid in water samples

ABSTRACT A new analytical temperature-assisted ionic liquid-based dispersive liquid–liquid microextraction (TA-IL-DLLME) method was developed for glyphosate and aminomethylphosphonic acid determination in water samples. Extracted analytes were derivatized using 9-fluoroenylmethylchloroformate and quantified by liquid chromatography with fluorescence detection. For the TA-IL-DLLME method, two strategies for phase solubilization were evaluated; in approach 1, the ionic liquid and aqueous matrix sample were mixed and then heated, while in approach 2, the aqueous sample was first heated and then the ionic liquid was injected. For both approaches, optimization included parameters that significantly affect extraction efficiency: ionic liquid type and volume, solubilization temperature and time, cooling and centrifugation time. Among the evaluated ionic liquids, 1-decyl-3-methylimidazolium tetrafluoroborate showed the best performance for TA-IL-DLLME and was selected for the two solubilization approaches; with approach 2, slightly better results were obtained. Thus, sample analyses were performed using a procedure based on approach 2. An important matrix effect, attributed to the presence of salts and metals in real water samples was observed. Sample acidification before derivatization allowed this problem to diminish, with recoveries ranging from 75 and 99%, and enrichment factors between 57 and 76 for target analytes. GRAPHICAL ABSTRACT

Biodegradable nanoparticles loaded with tetrameric melittin: preparation and membrane disruption evaluation

Melittin is the main component of bee venom consisting of 26 amino acids that has multiple effects, including antibacterial, antiviral and anti-inflammatory in various cell types. This peptide forms pores in biological membranes and triggers cell death. Therefore it has potential as an anti-cancer therapy. However, the therapeutic application of melittin is limited due to its main side effect, hemolysis, which is especially pronounced following intravenous administration. In the present study, we formulated tetrameric melittin-carrying poly-D,L-lactic-co-glycolic acid nanoparticles (PLGA-NPs) and analyzed the lytic activity of this system on liposomes that resembles breast cancer cells. Tetrameric melittin binds avidly to PLGA-NPs with an encapsulation efficiency of 97% and retains its lytic activity demonstrating the effectiveness of PLGA-NPs as nanocarriers for this cytolytic peptide.

Developments of solid-phase microextraction fiber coatings for environmental pharmaceutical and personal care products analysis

Abstract Solid-phase microextraction (SPME) is a sample preparation technique with many applications that is being continuously developed. In this technique, the type of fiber coating plays a crucial role for extraction efficiency. Currently available commercial coatings have certain drawbacks that have been overcome by the development of new coatings based on novel materials; these have improved the efficiency of extraction, selectivity and stability of commercial coatings. Pharmaceutical and personal care products (PPCPs) are one of the most important groups of emerging contaminants; however, some studies suggest that these compounds can cause adverse health effects. No official monitoring protocols for these compounds are currently available, so the establishment of analytical methods that allow their determination in environmental samples is required. The complexity of environmental samples together with the low concentration levels of these compounds makes necessary the use of sample preparation techniques capable of removing interferences, as well as preconcentrated analytes, and SPME is a very promising alternative to achieve this. This review describes the recent developments in SPME with classical and novel coatings and its applications for PPCP determination in environmental samples.

Differential interaction of α-synuclein N-terminal segment with mitochondrial model membranes

Alpha-synuclein (α-syn) is an intrinsically-disordered protein that has been associated with Parkinsons disease through its deposition in an amyloid fibril form within Lewy Body. Several lines of evidence suggest that the physical association of α-syn with the mitochondrial membranes may cause membrane damage and mitochondrial dysfunction, playing an important role in disease progression. Although there is strong evidence that the N-terminus part of α-syn is essential for membrane affinity, cooperative formation of helical domains and regulation of mitochondria membrane permeability, the amino acids involve in this membrane binding is still controversial. Fluorescence spectroscopy, circular dichroism and Langmuir monolayer technique were used to elucidate this recognition process of mitochondrial membrane system by synthetic peptides derived from α-syn N-terminal segment. The results obtained in this work show that the first 15 amino acid of the α-syn N-terminal segment mainly participate in the anchoring, perturbing the membrane hydrophobic region, while the peptide corresponding to 16-30 residues interacts only with the phospholipid polar headgroup, confirming that the binding affinity of the N-terminus is nonuniform.

In Vitro Study of Antiamoebic Activity of Methanol Extracts of Argemone mexicana on Trophozoites of Entamoeba histolytica HM1-IMSS

Infections caused by parasites in humans represent one of the main public health concerns. Amoebiasis, a parasitic infection caused by Entamoeba histolytica (E. histolytica), is considered endemic in Mexico, where Argemone mexicana (A. mexicana) has been used in traditional medicine to treat intestinal parasitic diseases. The objective of this work was to evaluate the potential biological activity of A. mexicana on E. histolytica. For this purpose, a methanolic extract was prepared from A. mexicana leaves, and a differential fractionation was carried out with solvents of different polarities. The inhibitory capacities of the extract and its fractions were evaluated in vitro using HM1-IMSS, a strain of Entamoeba histolytica. A. mexicana extract was found to have a growth-inhibiting activity for E. histolytica, showing IC50 = 78.39 μg/mL. The extract was characterized phytochemically, and the methanolic extract fractions were analyzed by liquid chromatography (HPLC) and mass spectrometry (MS). Berberine and jatrorrhizine were present in the active fractions, and these compounds may be responsible for the antiparasitic activity. The identification of amoebicidal activity of A. mexicana on E. histolytica gives support to the traditional use. Further studies with berberine and jatrorrhizine will be carried out to understand the mechanism involved.

Optimization and Validation of Two High-Throughput Methods Indicating Antiradical Activity

Background: The search for new natural or synthetic products with antioxidant activity is commonly based on methods that involve reduction of either 2,2-diphenyl-1-picrylhydrazyl (DPPH) or 2-2-azino-bis(3-ethylbenzothiazoline-6-sulphonic acid) (ABTS). However, the reported values of the effective concentrations are highly variable, even in controls. Herein, we optimize and validate both meth-ods of determining antiradical activity. Methods: Optimization was carried out using both a fractionated factorial design and a basic sequential simplex method, by monitoring the reduction percentage. Quercetin or Trolox were used as positive con-trol. Furthermore, for each method, linearity, precision, accuracy, robustness, plate uniformity, signal variability, and Z factor, were established. Results: The optimized conditions for the DPPH method were: DPPH 280 μM in ethanol and 15 min of reaction time in the dark. The linear range was between 7 and 140 μM with an R2 value of 0.9987. The optimized conditions for the ABTS method were: ABTS adjusted to 0.7 absorbance units, 70% concen-tration in ethanol, and a reaction time of 6 min in the dark. The linear range was found to be between 1 and 70% with an R2 = 0.9991. For both methods, the accuracy and precision were within limits and the Z factor value was higher than 0.89. The applicability of each method was assessed by analyzing eight plant extracts. Conclusion: The DPPH and ABTS reduction methods were optimized and validated on a microscale and could be expected to be implemented in any laboratory.

Optimization and Validation of a Microscale In Vitro Method to Assess a-Glucosidase Inhibition Activity

Background: Microscale in vitro assays are fast, simple, and inexpensive, with reduced reagent quantities, waste, and experimental animal use. However, they have low reproducibility and low correlation with the results of in vivo models, possibly due to differences in precision and accuracy in methodologies between laboratories. Objective: The objective was the optimization and validation of an in vitro assay, carried out on microscale, to assess the inhibition of α-glucosidase activity, which is indicative of antihyperglycemic activity. Methods: The optimization was carried out using a fractional factorial design taking into account the best inhibition percentage and the absorbance of the controls. With the optimized experimental conditions in hand, we carried out method validation. Results: The optimized conditions were as follows: enzyme concentration, 0.55 U/mL; substrate concentration, 111.5 μM; and 17.5 min incubation at 37°C. A linear range between 100 and 310.2 μg/mL of acarbose (r2 0.994) was established. The RSD was <2% and the % error was <3%. The Z factor was >0.96. This method was applied to four plant extracts, one of which was found to be very active. Conclusion: The method was found to be accurate, precise, selective, linear, and reliable in evaluating the antihyperglycemic activity of natural extracts in vitro.