Rodrigo Dantas Pereira

Fracture resistance and stress distribution of simulated immature teeth after apexification with mineral trioxide aggregate.

AIM To evaluate the effect of adhesive restorations on fracture resistance and stress distribution in teeth with simulated immature apices and apical plugs of mineral trioxide aggregate (MTA). METHODOLOGY Sixty bovine incisors were sectioned 8 mm above and 12 mm below the cemento-enamel junction (CEJ). The root canal was enlarged using a diamond bur, resulting in remaining root canal walls with 0.1-0.2 mm of thickness. A 5-mm apical plug of MTA was placed and the teeth were restored according to the following groups: GP--the root canal was filled with gutta-percha and endodontic sealer; CR--the root canal was filled with light-cured composite resin inserted incrementally; FP--a fibre post was cemented into the root canal; and RFP--the fibre post was relined with composite resin prior to the cementation into the root canal. A load was applied on the crown of all teeth at 135° to their long axis until fracture. Data was analysed by one-way anova and SNK tests (α = 0.05), whilst the fracture pattern was evaluated according to the position of the fracture. Stress distributions in the restored teeth were verified by finite element analysis. RESULTS Teeth restored with fibre posts and relined fibre posts were associated with the highest fracture resistance, whilst the GP group had the lowest values. GP and RC groups had similar fracture resistance values (P = 0.109). All fractures types involved the cervical and middle thirds of roots. The GP model had high levels of stress concentration in the cervical and middle thirds of roots. No difference was found amongst the stress concentration in the RC, FP and RFP models. CONCLUSION Restorative protocols alter the fracture resistance and stress distribution of immature teeth after placement of MTA apical plugs.

A Novel Dentin Push-out Bond Strength Model That Uses Micro-Computed Tomography.

INTRODUCTION Current push-out experimental methods used in endodontic research should be improved. This study introduced a novel dentin push-out bond strength model that uses micro-computed tomography (μCT). METHODS Roots filled with gutta-percha cones and different resin-based sealers (n = 10) were sectioned transversely to obtain two 2-mm-thick slices per root third. The first slice was subjected to a push-out test by using a material testing stage fitted inside a μCT scanner. The apparatus was scanned before and after the test to evaluate areas of filling material ruptures. The images provided by μCT were also used to generate models for a 3-dimensional finite element analysis. Confocal laser scanning microscopy was used to assess failure modes after the test and to measure interfacial gaps in slices not subjected to push-out. Bond-strength and gap data were statistically analyzed (P < .05). RESULTS Proper coefficients of variation (average less than 30%) were observed for all the experimental conditions. The finite element analysis helped explain the results of bond strength and root-filling ruptures. A significant, moderate, indirect correlation was observed between the bond strength and gaps. CONCLUSIONS The micromechanical model with the μCT images resulted in a consistent root-filling bond strength evaluation.

Microtensile Bond Strength of Methacrylate and Silorane Resins to Enamel and Dentin

The aim of this study was to evaluate the microtensile bond strength (µTBS) of two substrates (enamel and dentin) considering two study factors: type of composite resin [methacrylate-based (Filtek Supreme) or silorane-based (Filtek LS)] and aging time (24 h or 3 months). Twenty human molars were selected and divided into 2 groups (n=10) considering two dental substrates, enamel or dentin. The enamel and dentin of each tooth was divided into two halves separated by a glass plate. Each tooth was restored using both tested composite resins following the manufacturers instructions. The samples were sectioned, producing 4 sticks for each composite resin. Half of them were tested after 24 h and half after 3 months. µTBS testing was carried out at 0.05 mm/s. Data were analyzed by three-way ANOVA and Tukeys HSD tests at α=0.05. Significant differences between composite resins and substrates were found (p<0.05), but no statistically significant difference was found for aging time and interactions among study factors. The methacrylate-based resin showed higher µTBS than the silorane-based resin. The µTBS for enamel was significantly higher than for dentin, irrespective of the composite resin and storage time. Three months of storage was not sufficient time to cause degradation of the bonding interaction of either of the composite resins to enamel and dentin.

Bond strength of epoxy resin‐based root canal sealer to human root dentin irradiated with Er,Cr:YSGG laser

The aim was to evaluate the influence of Er,Cr:YSGG laser irradiation associated with different final irrigation protocols on the bond strength of epoxy resin‐based root canal sealer to root dentin, on the dentin/filling material interface and in the temperature variation during irradiation.

Root filling bond strength using reciprocating file-matched single-cones with different sealers

The aim of the present study was to evaluate the bond strength (BS) of root canal fillings to root dentin using the reciprocating file-matched single-cone or lateral compaction techniques with resin-based and calcium-silicate-based sealers. Maxillary canine roots were prepared and filled using one of the following approaches: Reciproc R40 file and R40 single cone, WaveOne Large file and Large single cone, or ProTaper up to F4 file with lateral compaction. The root filling was performed using AH Plus, Epiphany SE or MTA Fillapex (n = 10). Three 1-mm-thick slices were obtained from each third of each root. Two slices were subjected to a push-out test, and the other slices were prepared for scanning electron microscopy (SEM) to examine the dentin-sealer interface. Data (in MPa) from the push-out tests were analyzed using a two-way ANOVA and Tukeys test (p < 0.05). Failure modes (adhesive, cohesive or mixed) were evaluated at ×25 magnification. The single-cone techniques resulted in lower BS values than the lateral compaction technique. For lateral compaction, AH Plus and Epiphany SE showed the highest and lowest BS values, respectively. Slight differences were observed between sealers when the single-cone techniques were used. A tendency to reduce the BS toward the apical third was observed. Adhesive failures were predominant for all experimental conditions. A closer adaption of the filling material on the root dentin was observed for the AH Plus and lateral compaction techniques. The Reciproc and WaveOne techniques were associated with lower BS values than the lateral compaction technique. However, the effect of the root canal filling technique appears to be sealer-dependent.

Does MTA affect fiber post retention in repaired cervical root canal perforations

This study evaluated the effect of mineral trioxide aggregate (MTA) on the retention of fiber posts in repaired root canal perforations. Ten-millimeter post spaces were prepared in 60 endodontically treated bovine incisors. Root perforations were created in half of the root canals in the cervical area prior to being filled with white MTA-Angelus. Fiber posts were luted into the root canals with two self-adhesive (RelyX Unicem or Set) or self-etching (Panavia F) resin cements. The posts were submitted to a pull-out test, and the data were submitted to two-way ANOVA and Tukeys post hoc tests (α = 0.05). The fiber posts exhibited reduced retention in MTA-repaired root canal perforations, regardless of the type of resin cement that was used (p < 0.001). Self-adhesive resin cements provided higher bond strength values than Panavia F, while no difference was observed between RelyX Unicem and Set (p > 0.05). The presence of MTA in repaired root perforations negatively affected post retention. In addition, self-adhesive cements seemed to be the best option to lute fiber posts within a root canal in these cases.