Róisín M. Owens

High transconductance organic electrochemical transistors.

The development of transistors with high gain is essential for applications ranging from switching elements and drivers to transducers for chemical and biological sensing. Organic transistors have become well-established based on their distinct advantages, including ease of fabrication, synthetic freedom for chemical functionalization, and the ability to take on unique form factors. These devices, however, are largely viewed as belonging to the low-end of the performance spectrum. Here we present organic electrochemical transistors with a transconductance in the mS range, outperforming transistors from both traditional and emerging semiconductors. The transconductance of these devices remains fairly constant from DC up to a frequency of the order of 1 kHz, a value determined by the process of ion transport between the electrolyte and the channel. These devices, which continue to work even after being crumpled, are predicted to be highly relevant as transducers in biosensing applications.

High-performance transistors for bioelectronics through tuning of channel thickness

Transistors with tunable transconductance allow high-quality recordings of human brain rhythms. Despite recent interest in organic electrochemical transistors (OECTs), sparked by their straightforward fabrication and high performance, the fundamental mechanism behind their operation remains largely unexplored. OECTs use an electrolyte in direct contact with a polymer channel as part of their device structure. Hence, they offer facile integration with biological milieux and are currently used as amplifying transducers for bioelectronics. Ion exchange between electrolyte and channel is believed to take place in OECTs, although the extent of this process and its impact on device characteristics are still unknown. We show that the uptake of ions from an electrolyte into a film of poly(3,4-ethylenedioxythiophene) doped with polystyrene sulfonate (PEDOT:PSS) leads to a purely volumetric capacitance of 39 F/cm3. This results in a dependence of the transconductance on channel thickness, a new degree of freedom that we exploit to demonstrate high-quality recordings of human brain rhythms. Our results bring to the forefront a transistor class in which performance can be tuned independently of device footprint and provide guidelines for the design of materials that will lead to state-of-the-art transistor performance.

Organic electrochemical transistor incorporating an ionogel as a solid state electrolyte for lactate sensing

Room temperature Ionic liquids (RTILs) have evolved as a new type of solvent for biocatalysis, mainly due to their unique and tunable physical properties.[1] In addition, within the family of organic semiconductor-based sensors, organic electrochemical transistors (OECTs) have attracted particular interest.[2] Here, we present a simple and robust biosensor, based on a OECT, capable of measuring lactic acid using a gel-like polymeric materials that endow RTIL (ionogel)[3] as solid-state electrolyte both to immobilise the enzyme and to serve as a supporting electrolyte.[4] This represents the first step towards the achievement of a fast, flexible, miniaturised and cheap way of measuring lactate concentration in sweat.

Measurement of Barrier Tissue Integrity with an Organic Electrochemical Transistor

The integration of an organic electrochemical transistor with human barrier tissue cells provides a novel method for assessing toxicology of compounds in vitro. Minute variations in paracellular ionic flux induced by toxic compounds are measured in real time, with unprecedented temporal resolution and extreme sensitivity.

All-Plastic Electrochemical Transistor for Glucose Sensing Using a Ferrocene Mediator

We demonstrate a glucose sensor based on an organic electrochemical transistor (OECT) in which the channel, source, drain, and gate electrodes are made from the conducting polymer poly(3,4-ethylenedioxythiophene) doped with poly(styrene sulfonate) (PEDOT:PSS). The OECT employs a ferrocene mediator to shuttle electrons between the enzyme glucose oxidase and a PEDOT:PSS gate electrode. The device can be fabricated using a one-layer patterning process and offers glucose detection down to the micromolar range, consistent with levels present in human saliva.

Organic semiconductors in sensor applications

Water Soluble Poly(fluorene) Homopolymers and Copolymers for Chemical and Biological Sensors.- Polyelectrolyte-Based Fluorescent Sensors.- Structurally Integrated Photoluminescent Chemical and Biological Sensors: An Organic Light-Emitting Diode-Based Platform.- Lab-on-a-Chip Devices with Organic Semiconductor-Based Optical Detection.- Solid-State Chemosensitive Organic Devices for Vapor-Phase Detection.- Detection of Chemical and Physical Parameters by Means of Organic Field-Effect Transistors.- Performance Requirements and Mechanistic Analysis of Organic Transistor-Based Phosphonate Gas Sensors.- Electrochemical Transistors for Applications in Chemical and Biological Sensing.- PEDOT:PSS-Based Electrochemical Transistors for Ion-to-Electron Transduction and Sensor Signal Amplification.

A dedicated translation factor controls the synthesis of the global regulator Fis.

BipA is a highly conserved protein with global regulatory properties in Escherichia coli. We show here that it functions as a translation factor that is required specifically for the expression of the transcriptional modulator Fis. BipA binds to ribosomes at a site that coincides with that of elongation factor G and has a GTPase activity that is sensitive to high GDP:GTP ratios and stimulated by 70S ribosomes programmed with mRNA and aminoacylated tRNAs. The growth rate‐dependent induction of BipA allows the efficient expression of Fis, thereby modulating a range of downstream processes, including DNA metabolism and type III secretion. We propose a model in which BipA destabilizes unusually strong interactions between the 5′ untranslated region of fis mRNA and the ribosome. Since BipA spans phylogenetic domains, transcript‐selective translational control for the ‘fast‐track’ expression of specific mRNAs may have wider significance.

Transposition into Replicating DNA Occurs through Interaction with the Processivity Factor

The bacterial transposon Tn7 directs transposition into actively replicating DNA by a mechanism involving the transposon-encoded protein TnsE. Here we show that TnsE physically and functionally interacts with the processivity factor of the DNA replication machinery in vivo and in vitro. Our work establishes an in vitro TnsABC+E transposition reaction reconstituted from purified proteins and target DNA structures. Using the in vitro reaction we confirm that the processivity factor specifically reorders TnsE-mediated transposition events on target DNAs in a way that matches the bias with active DNA replication in vivo. The TnsE interaction with an essential and conserved component of the replication machinery, and a DNA structure reveals a mechanism by which Tn7, and probably other elements, selects target sites associated with DNA replication.

Combined Optical and Electronic Sensing of Epithelial Cells Using Planar Organic Transistors

A planar, conducting-polymer-based transistor for combined optical and electronic monitoring of live cells provides a unique platform for monitoring the health of cells in vitro. Monitoring of MDCK-I epithelial cells over several days is shown, along with a demonstration of the device for toxicology studies, of use in future drug discovery or diagnostics applications.

PEDOT: gelatin composites mediate brain endothelial cell adhesion

Conducting polymers (CPs) are increasingly being used to interface with cells for applications in both bioelectronics and tissue engineering. To facilitate this interaction, cells need to adhere and grow on the CP surface. Extracellular matrix components are usually necessary to support or enhance cell attachment and growth on polymer substrates. Here we show the preparation of PEDOT(TOS):gelatin composites as a new biocompatible substrate for use in tissue engineering. Gelatin, a derivative of the extracellular matrix protein collagen, was incorporated into poly(3,4 ethylenedioxythiophene)-tosylate (PEDOT(TOS)) films via vapour phase polymerisation (VPP) without changing the electrochemical properties of the CP. Further, gelatin, incorporated into the PEDOT(TOS) film, was found to specifically support bovine brain capillary endothelial cell adhesion and growth, indicating that the functionality of the biomolecule was maintained. The biocompatibility of the composite films was demonstrated indicating the significant future potential of biocomposites of this type for use in promoting cell adhesion in electrically active materials for tissue engineering.