Roland L. Bowles

Coherent lidar airborne windshear sensor: performance evaluation

National attention has focused on the critical problem of detecting and avoiding windshear since the crash on 2 Aug. 1985 of a Lockheed L-1011 at Dallas/Fort Worth International Airport. As part of the NASA/FAA National Integrated Windshear Program, we have defined a measurable windshear hazard index that can be remotely sensed from an aircraft, to give the pilot information about the wind conditions he will experience at some later time if he continues along the present flight path. A technology analysis and end-to-end performance simulation measuring signal-to-noise ratios and resulting wind velocity errors for competing coherent laser radar (lidar) systems have been carried out. The results show that a Ho:YAG lidar at a wavelength of 2.1 microm and a CO(2) lidar at 10.6 microm can give the pilot information about the line-of-sight component of a windshear threat from his present position to a region extending 2-4 km in front of the aircraft. This constitutes a warning time of 20-40 s, even in conditions of moderately heavy precipitation. Using these results, a Coherent Lidar Airborne Shear Sensor (CLASS) that uses a Q-switched CO(2) laser at 10.6 microm is being designed and developed for flight evaluation in the fall of 1991.

Investigation of airborne lidar for avoidance of windshear hazards

A generalized windshear hazard index is defined, which is derived from considerations of wind conditions at the present position of an aircraft and from remotely sensed information along the extended flight path. Candidate airborne sensor technologies based on microwave Doppler radar, Doppler lidar, and infrared radiometric techniques are discussed in the context of overall system functional requirements. Initial results of a performance and technology assessment study for competing lidars are presented. Based on a systems approach to the windshear threat, lidar appears to be a viable technology for windshear detection and avoidance, even in conditions of moderately heavy precipitation. The proposed airborne CO2 and Ho:YAG lidar windshear-detection systems analyzed here can give the pilot information about the line-of-sight component of windshear threat from his present position to a region extending 1 to 3 km in front of the aircraft. This constitutes a warning time of 15 to 45 seconds. The technology necessary to design, build, and test such a brassboard 10.6 micron CO2 lidar is now available. However, for 2-micron systems, additional analytical and laboratory investigations are needed to arrive at optimum 2-micron rare-earth-based laser crystals.

Windshear Avoidance: Requirements And Proposed System For Airborne Lidar Detection

A generalized windshear hazard index is defined, which is derived from considerations of wind conditions and an aircrafts present and potential altitude. Based on a systems approach to the windshear threat, lidar appears to be a viable methodology for windshear detection and avoidance, even in conditions of moderately heavy precipitation. The proposed airborne CO2 and Ho:YAG lidar windshear detection systems analyzed in this paper can each give the pilot information about the line-of-sight component of windshear threat from his present position to a region extending 1 to 3 km in front of the aircraft. This constitutes a warning time of 15 to 45 s. The technology necessary to design, build and test such a brassboard 10.6-μm CO2 lidar is at hand.

Infrared lidar windshear detection for commercial aircraft and the edge technique, a new method for atmospheric wind measurement

National attention has focused on the critical problem of detecting and avoiding windshear since the crash on August 2, 1985, of a Lockheed L-1011 at Dallas/Fort Worth International Airport. As part of The NASA/FAA National Integrated Windshear Program, we have defined a measurable windshear hazard index that can be remotely sensed from an aircraft, to give the pilot information about the wind conditions he will experience at some later time if he continues along the present flight path. Our technology analysis and end-to-end performance simulation, which measured signal-to-noise ratios and resulting wind velocity errors for competing coherent lidar systems, showed that a Ho:YAG lidar at a wavelength of 2.1 μm and a CO2 lidar at 10.6 m can give the pilot information about the line-of-sight component of a windshear threat in a region extending from his present position to 2 to 4 km in front of the aircraft. This constitutes a warning time of 20 to 40 s, even under conditions of moderately heavy precipitation. Using these results, a Coherent Lidar Airborne Shear Sensor (CLASS), using a Q-switched CO2 laser at 10.6 μm, is being designed and developed for flight evaluation in early 1992. The edge technique is a powerful new method for the measurement of small frequency shifts which allows high accuracy measurement of atmospheric winds (0.2 to 1 m/sec) with high vertical resolution (10 meters) using currently available technology.

Lidar wind shear detection for commercial aircraft

National attention has focused on the critical problem of detecting and avoiding windshear since the crash on August 2, 1985, of a Lockheed L-1011 at Dallas/Fort Worth International Airport. As part of The NASA/FAA National Integrated Windshear Program, the authors have defined a measurable windshear hazard index that can be remotely sensed from an aircraft, to give the pilot information about the wind conditions he will experience at some later time if he continues along the present flight path. The technology analysis and end- to-end performance simulation, which measures signal-to-noise ratios and resulting wind velocity errors for competing coherent lidar systems, shows that a Ho:YAG lidar at a wavelength of 2.1 micrometers and a CO2 lidar at 10.6 micrometers can give the pilot information about the line-of-sight component of a windshear threat in a region extending from his present position to 2 to 4 km in front of the aircraft. This constitutes a warning time of 20 to 40 s, even under conditions of moderately heavy precipitation. Using these results, a Coherent Lidar Airborne Shear Sensor (CLASS), using a Q-switched CO2 laser at 10.6 micrometers , is being designed and developed for flight evaluation in early 1992.

Coherent Lidar Airborne Shear Sensor (CLASS)

Coherent lidar airborne shear sensor (CLASS) is a development and flight-validation program to demonstrate the feasibility of airborne CO2 coherent lidar systems for predictive detection of hazardous windshear conditions.