Rolando Barbucci

Hyaluronic acid hydrogel in the treatment of osteoarthritis

In order to overcome the problem of rapid clearance of the polysaccharide hyaluronic acid (Hyal) in the treatment of osteoarthritis (OA), a 50% cross-linked Hyal hydrogel (Hyal 50%) was synthesised. The 50% refers to the amount of COOH groups of the polysaccharide involved in the cross-linking reaction. i.e. 50% of the total amount. The rheological behaviour of the Hyal 50% hydrogel, and in particular the possibility to inject it through a needle, was studied. The results obtained demonstrated that the hydrogel injected through the needle still behaved like a gel, although it showed a reduction of the dynamic moduli. The most appropriate sterilisation technique for this kind of hydrogel was also evaluated. Liophilised Hyal 50% samples were sterilised by steam, Ethylene Oxide (EtO) and gamma-rays. EtO and gamma-rays did not modify the characteristics of the hydrogel in terms of swellability and morphology. Lastly, the in vivo effect of Hyal 50% hydrogel in the treatment of chondral defect in rabbit knee was also studied. The results obtained showed the Hyal 50% injections improved chondrocytes density and matrix appearance. Furthermore, the permanence in situ of the hydrogel was longer than that of the linear Hyal.

Biological Performance of Materials

The biomaterial science, the study of the application of materials to biological and biomedical problems is a field characterised by medical needs, basic research, advanced technological development, industrial involvement, ethical considerations and regulations. The biological performance of materials largely depends on their bulk and surface properties.

Synthesis, physico-chemical properties and biomedical applications of poly(amidoamine)s

Abstract The aim of this article is to provide a comprehensive survey on synthesis, chemical and physico-chemical properties, and applications in several fields, including the biomedical field, of a family of tertiary amino polymers, the poly(amido-amine)s.

Tissue-specific gene expression in chondrocytes grown on three-dimensional hyaluronic acid scaffolds

The re-differentiation capacities of human articular and chick embryo sternal chondrocytes were evaluated by culture on HYAFF-11 and its sulphate derivative, HYAFF-11-S, polymers derived from the benzyl esterification of hyaluronate. Initial results showed that the HYAFF-11-S material promoted the highest rate of chondrocyte proliferation. RNA isolated from human and chick embryo chondrocytes cultured in Petri dishes, HYAFF-11 or HYAFF-11-S were subjected to semi-quantitative RT-PCR analyses. Human collagen types I, II, X, human Sox9 and aggrecan, chick collagen types I, II, IX and X were analysed. Results showed that human collagen type II mRNA expression was upregulated on HYAFF-11 biomaterials. In particular, a high level of collagen type IIB expression was associated with three-dimensional culture conditions, and the HYAFF-11 material was the most supportive for human collagen type X mRNA expression. Human Sox9 mRNA levels were constantly maintained in monolayer cell culture conditions over a period of 21 days, while these were upregulated when chondrocytes were cultured on HYAFF-11 and HYAFF-11S. Furthermore, chick collagen type IIA and IIB mRNA expression was detected after only 7 days of HYAFF-11 culture. Chick collagen type IX mRNA expression decreased in scaffold cultures over time. Histochemical staining performed in engineered cartilage revealed the presence of a de novo synthesized glycosaminoglycan-rich extracellular matrix; immunohistochemistry confirmed the deposition of collagen type II. This study showed that the three-dimensional HYAFF-11 culture system is both an effective chondrocyte delivery system for the treatment of articular cartilage defects, and an excellent in vitro model for studying cartilage differentiation.

Micro and nano-structured surfaces.

The study of cell reaction to micro and nanotopography is dependent on the method of manufacture available. Several methods of manufacture have been developed: polymer demixing, embossing and photolithography. Surfaces obtained with these different techniques, having micro and/or nanodomains, have been studied toward the same type of cells, i.e. human endothelial cells (HGTFN) and mouse fibroblasts (3T3). Polymer demixing of polystyrene (PS) and poly(4-bromostyrene) (PBrS) producing nanometrically islands of 18, 45 and 100 nm height, polycarbonate (PC) and polycaprolactone (PCL) grooved with grooves 450 nm wide and 190 high, the natural polysaccharide hyaluronic acid (Hyal) and its sulfated derivative (HyalS) photoimmobilized on silanized glass as grooves 250 nm high and 100, 50, 25 or 10 μm wide have been obtained. The morphology and polarization of the cells has been studied by optical microscopy and scanning electron microscopy. Cells respond in different way to the topography of the materials, but the surface chemistry is dominant in inducing different cell behavior.

Conformation of human plasma proteins at polymer surfaces: the effectiveness of surface heparinization

Studies were made on the adsorption of two human plasma proteins, albumin (HSA) and fibrinogen (HFg), onto three different polymeric surfaces: commercial pellethane 2363-80AE (PU); pellethane crosslinked with a poly(amido-amine) (PUPA); and heparinized PUPA, using in situ ATR/FTIR spectroscopy (attenuated total reflection Fourier transform infrared spectroscopy). Conformational changes were found to occur on the two proteins upon adsorption onto bare PU and PUPA, and the protein unfolding on bare PU was also found to be time dependent. On the contrary, the two proteins do not change conformation when they are adsorbed onto the heparinized surface, emphasising the effectiveness of surface heparinization.

Blood-interaction performance of differently sulphated hyaluronic acids

Seven differently sulphated hyaluronic acid derivatives, having a general formula HyalSx where x can be 1, 2, 2.5, 3, 3.5, 3.8, 4, were synthetized. Coagulation tests i.e. whole blood clotting time and thrombin time were performed on these compounds and significant prolongations were observed from HyalS2.5 up to HyalS4. All that means the heparin like activity increases by increasing the sulphation degree of hyaluronic acid. The interaction of each of them with thrombin and FXa was studied in order to understand the mechanism of coagulation inactivation and the role of the sulphate position in the disaccharide unit to favour the protease inhibiting reaction. The bioactivity of HyalSx in terms of FXa and thrombin inactivation increases increasing with sulphation degree but the FXa inactivation seems to be mediated by ATIII, while the aspecific electrostatic interaction seems to play an important role in the inactivation of thrombin. Also the interaction with human serum albumin was studied by ATR/FT-IR technique and no changes of protein conformation was observed, as occurs in the case of heparin.

Synthesis, chemical and rheological characterization of new hyaluronic acid-based hydrogels

New hyaluronic acid-based hydrogels have been synthesized. The carboxylate groups of hyaluronan were activated in order to bind the amino terminal groups of the di-amine cross-linking reagent. Different hydrogels were obtained according to the different di-amine cross-linking agents (1,3-diaminepropane, 1,6-diaminohexane, PEG500 di-amine, and PEG800 di-amine). The crosslinked polymer (C.L.Hyal) was then sulphated (C.L.HyalS) by a heterogeneous reaction using sulphur trioxide pyridine complex (SO3-Py). The thermo-mechanical properties and swelling degree were evaluated and are discussed in relation to the chemical structure and the hydrophilic character of the gels. The different behaviours of C.L.Hyal and C.L.HyalS indicate the important role of sulphated groups.

Linear amino polymers: Synthesis, protonation and complex formation

Linear amino polymers containing basic nitrogen atoms are critically reviewed with regard to their synthesis, protonation and complex formation in solution with metal ions. Cross linked resins having essentially the same structure as linear polymers, are also mentioned. As far as the protonation is concerned, special care has been given to thermodynamic aspects, and to the most probable protonation mechanism. Complexing abilities of these polymers have been evaluated through stability constants and spectroscopic parameters. Practical implications of the properties have been considered.

A novel strategy for engineering hydrogels with ferromagnetic nanoparticles as crosslinkers of the polymer chains. Potential applications as a targeted drug delivery system

An efficient strategy is employed for the preparation of magnetic hybrid hydrogels consisting of functionalized CoFe2O4 magnetic nanoparticles covalently bound to a carboxymethylcellulose (CMC) polymer. The method involves the formation of an amide bond between the carboxylic groups of CMC and the amine groups of functionalized nanoparticles, which work as the crosslinking agents of the polymer chains. The hybrid hydrogels were chemically and morphologically characterized. The rheological properties of the hydrogels were also investigated with the aim to verify their behavior under an applied mechanical stress. The hybrid hydrogel turns out to be thixotropic. Thanks to the presence of magnetic nanoparticles, the hydrogel is capable of responding to an external magnetic field. Preliminary data show the possibility of loading the hydrogel with a dye, which can be considered as a drug model, to squeeze it through a syringe and to drive the material by the application of an external magnetic field.