Roman Fasel

Atomically precise bottom-up fabrication of graphene nanoribbons

Graphene nanoribbons—narrow and straight-edged stripes of graphene, or single-layer graphite—are predicted to exhibit electronic properties that make them attractive for the fabrication of nanoscale electronic devices. In particular, although the two-dimensional parent material graphene exhibits semimetallic behaviour, quantum confinement and edge effects should render all graphene nanoribbons with widths smaller than 10 nm semiconducting. But exploring the potential of graphene nanoribbons is hampered by their limited availability: although they have been made using chemical, sonochemical and lithographic methods as well as through the unzipping of carbon nanotubes, the reliable production of graphene nanoribbons smaller than 10 nm with chemical precision remains a significant challenge. Here we report a simple method for the production of atomically precise graphene nanoribbons of different topologies and widths, which uses surface-assisted coupling of molecular precursors into linear polyphenylenes and their subsequent cyclodehydrogenation. The topology, width and edge periphery of the graphene nanoribbon products are defined by the structure of the precursor monomers, which can be designed to give access to a wide range of different graphene nanoribbons. We expect that our bottom-up approach to the atomically precise fabrication of graphene nanoribbons will finally enable detailed experimental investigations of the properties of this exciting class of materials. It should even provide a route to graphene nanoribbon structures with engineered chemical and electronic properties, including the theoretically predicted intraribbon quantum dots, superlattice structures and magnetic devices based on specific graphene nanoribbon edge states.

Porous graphenes: two-dimensional polymer synthesis with atomic precision.

We demonstrate, by surface-assisted coupling of specifically designed molecular building blocks, the fabrication of regular two-dimensional polyphenylene networks with single-atom wide pores and sub-nanometer periodicity.

On-surface synthesis of graphene nanoribbons with zigzag edge topology.

Graphene-based nanostructures exhibit electronic properties that are not present in extended graphene. For example, quantum confinement in carbon nanotubes and armchair graphene nanoribbons leads to the opening of substantial electronic bandgaps that are directly linked to their structural boundary conditions. Nanostructures with zigzag edges are expected to host spin-polarized electronic edge states and can thus serve as key elements for graphene-based spintronics. The edge states of zigzag graphene nanoribbons (ZGNRs) are predicted to couple ferromagnetically along the edge and antiferromagnetically between the edges, but direct observation of spin-polarized edge states for zigzag edge topologies—including ZGNRs—has not yet been achieved owing to the limited precision of current top-down approaches. Here we describe the bottom-up synthesis of ZGNRs through surface-assisted polymerization and cyclodehydrogenation of specifically designed precursor monomers to yield atomically precise zigzag edges. Using scanning tunnelling spectroscopy we show the existence of edge-localized states with large energy splittings. We expect that the availability of ZGNRs will enable the characterization of their predicted spin-related properties, such as spin confinement and filtering, and will ultimately add the spin degree of freedom to graphene-based circuitry.

Amplification of chirality in two-dimensional enantiomorphous lattices

The concept of chirality dates back to 1848, when Pasteur manually separated left-handed from right-handed sodium ammonium tartrate crystals. Crystallization is still an important means for separating chiral molecules into their two different mirror-image isomers (enantiomers), yet remains poorly understood. For example, there are no firm rules to predict whether a particular pair of chiral partners will follow the behaviour of the vast majority of chiral molecules and crystallize together as racemic crystals, or as separate enantiomers. A somewhat simpler and more tractable version of this phenomenon is crystallization in two dimensions, such as the formation of surface structures by adsorbed molecules. The relatively simple spatial molecular arrangement of these systems makes it easier to study the effects of specific chiral interactions; moreover, chiral assembly and recognition processes can be observed directly and with molecular resolution using scanning tunnelling microscopy. The enantioseparation of chiral molecules in two dimensions is expected to occur more readily because planar confinement excludes some bulk crystal symmetry elements and enhances chiral interactions; however, many surface structures have been found to be racemic. Here we show that the chiral hydrocarbon heptahelicene on a Cu(111) surface does not undergo two-dimensional spontaneous resolution into enantiomers, but still shows enantiomorphism on a mesoscopic length scale that is readily amplified. That is, we observe formation of racemic heptahelicene domains with non-superimposable mirror-like lattice structures, with a small excess of one of the heptahelicene enantiomers suppressing the formation of one domain type. Similar to the induction of homochirality in achiral enantiomorphous monolayers by a chiral modifier, a small enantiomeric excess suffices to ensure that the entire molecular monolayer consists of domains having only one of two possible, non-superimposable, mirror-like lattice structures.

Controlled synthesis of single-chirality carbon nanotubes

Over the past two decades, single-walled carbon nanotubes (SWCNTs) have received much attention because their extraordinary properties are promising for numerous applications. Many of these properties depend sensitively on SWCNT structure, which is characterized by the chiral index (n,m) that denotes the length and orientation of the circumferential vector in the hexagonal carbon lattice. Electronic properties are particularly strongly affected, with subtle structural changes switching tubes from metallic to semiconducting with various bandgaps. Monodisperse ‘single-chirality’ (that is, with a single (n,m) index) SWCNTs are thus needed to fully exploit their technological potential. Controlled synthesis through catalyst engineering, end-cap engineering or cloning strategies, and also tube sorting based on chromatography, density-gradient centrifugation, electrophoresis and other techniques, have delivered SWCNT samples with narrow distributions of tube diameter and a large fraction of a predetermined tube type. But an effective pathway to truly monodisperse SWCNTs remains elusive. The use of template molecules to unambiguously dictate the diameter and chirality of the resulting nanotube holds great promise in this regard, but has hitherto had only limited practical success. Here we show that this bottom-up strategy can produce targeted nanotubes: we convert molecular precursors into ultrashort singly capped (6,6) ‘armchair’ nanotube seeds using surface-catalysed cyclodehydrogenation on a platinum (111) surface, and then elongate these during a subsequent growth phase to produce single-chirality and essentially defect-free SWCNTs with lengths up to a few hundred nanometres. We expect that our on-surface synthesis approach will provide a route to nanotube-based materials with highly optimized properties for applications such as light detectors, photovoltaics, field-effect transistors and sensors.

Surface-assisted cyclodehydrogenation provides a synthetic route towards easily processable and chemically tailored nanographenes

Atomically thin sheets of sp(2)-hybridized carbon--graphene--have enormous potential for applications in future electronic devices. Particularly promising are nanostructured (sub)units of graphene, the electronic properties of which can be tuned by changing the spatial extent or the specific edge termination of the carbon network. Processability and precise tailoring of graphene-derived structures are, however, still major obstacles in developing applications; both bottom-up and top-down routes are presently under investigation in attempts to overcome this limitation. Here, we propose a surface chemical route that allows for the atomically precise fabrication of tailored nanographenes from polyphenylene precursors. The cyclodehydrogenation of a prototypical polyphenylene on Cu(111) is studied using scanning tunnelling microscopy and density functional theory. We find that the thermally induced cyclodehydrogenation proceeds via several intermediate steps, two of which can be stabilized on the surface, yielding unprecedented insight into a dehydrogenative intramolecular aryl-aryl coupling reaction.

Graphene nanoribbon heterojunctions

Despite graphenes remarkable electronic properties, the lack of an electronic bandgap severely limits its potential for applications in digital electronics. In contrast to extended films, narrow strips of graphene (called graphene nanoribbons) are semiconductors through quantum confinement, with a bandgap that can be tuned as a function of the nanoribbon width and edge structure. Atomically precise graphene nanoribbons can be obtained via a bottom-up approach based on the surface-assisted assembly of molecular precursors. Here we report the fabrication of graphene nanoribbon heterojunctions and heterostructures by combining pristine hydrocarbon precursors with their nitrogen-substituted equivalents. Using scanning probe methods, we show that the resulting heterostructures consist of seamlessly assembled segments of pristine (undoped) graphene nanoribbons (p-GNRs) and deterministically nitrogen-doped graphene nanoribbons (N-GNRs), and behave similarly to traditional p-n junctions. With a band shift of 0.5 eV and an electric field of 2 × 10(8) V m(-1) at the heterojunction, these materials bear a high potential for applications in photovoltaics and electronics.

Electronic structure of atomically precise graphene nanoribbons.

Some of the most intriguing properties of graphene are predicted for specifically designed nanostructures such as nanoribbons. Functionalities far beyond those known from extended graphene systems include electronic band gap variations related to quantum confinement and edge effects, as well as localized spin-polarized edge states for specific edge geometries. The inability to produce graphene nanostructures with the needed precision, however, has so far hampered the verification of the predicted electronic properties. Here, we report on the electronic band gap and dispersion of the occupied electronic bands of atomically precise graphene nanoribbons fabricated via on-surface synthesis. Angle-resolved photoelectron spectroscopy and scanning tunneling spectroscopy data from armchair graphene nanoribbons of width N = 7 supported on Au(111) reveal a band gap of 2.3 eV, an effective mass of 0.21 m(0) at the top of the valence band, and an energy-dependent charge carrier velocity reaching 8.2 × 10(5) m/s in the linear part of the valence band. These results are in quantitative agreement with theoretical predictions that include image charge corrections accounting for screening by the metal substrate and confirm the importance of electron-electron interactions in graphene nanoribbons.

Porous Graphene as an Atmospheric Nanofilter

The fabrication of nanoscale membranes exhibiting high selectivity is an emerging field of research. The possibility to use bottom-up approaches to fabricate a filter with porous graphene and analyze its functionality with first principle calculations is investigated. Here, the porous network is produced by self-assembly of the hexaiodo-substituted macrocycle cyclohexa-m-phenylene (CHP). The resulting porous network exhibits an extremely high selectivity in favor of H(2) and He among other atmospheric gases, such as Ne, O(2), N(2), CO, CO(2), NH(3), and Ar. The presented membrane is superior to traditional filters using polymers or silica and could have great potential for further technological applications such as gas sensors or fuel cells.

Fabrication of surface-supported low-dimensional polyimide networks.

Interest in thermal and chemical stability of surface-supported organic networks has stimulated recent attempts to covalently interlink adsorbed molecular species into extended nanostructures. We show, using low-temperature scanning tunneling microscopy, that imidization of anhydrides and amines adsorbed on Au(111) can be thermally initiated under controlled ultrahigh vacuum conditions. Using two types of amine-functionalized polyphenyl molecules together with the organic semiconductor PTCDA, monolayer thick linear polymeric strands and a porous polymeric network with nanoscale dimensions are obtained.