Ron Bonner

Targeted Data Extraction of the MS/MS Spectra Generated by Data-independent Acquisition: A New Concept for Consistent and Accurate Proteome Analysis

Most proteomic studies use liquid chromatography coupled to tandem mass spectrometry to identify and quantify the peptides generated by the proteolysis of a biological sample. However, with the current methods it remains challenging to rapidly, consistently, reproducibly, accurately, and sensitively detect and quantify large fractions of proteomes across multiple samples. Here we present a new strategy that systematically queries sample sets for the presence and quantity of essentially any protein of interest. It consists of using the information available in fragment ion spectral libraries to mine the complete fragment ion maps generated using a data-independent acquisition method. For this study, the data were acquired on a fast, high resolution quadrupole-quadrupole time-of-flight (TOF) instrument by repeatedly cycling through 32 consecutive 25-Da precursor isolation windows (swaths). This SWATH MS acquisition setup generates, in a single sample injection, time-resolved fragment ion spectra for all the analytes detectable within the 400–1200 m/z precursor range and the user-defined retention time window. We show that suitable combinations of fragment ions extracted from these data sets are sufficiently specific to confidently identify query peptides over a dynamic range of 4 orders of magnitude, even if the precursors of the queried peptides are not detectable in the survey scans. We also show that queried peptides are quantified with a consistency and accuracy comparable with that of selected reaction monitoring, the gold standard proteomic quantification method. Moreover, targeted data extraction enables ad libitum quantification refinement and dynamic extension of protein probing by iterative re-mining of the once-and-forever acquired data sets. This combination of unbiased, broad range precursor ion fragmentation and targeted data extraction alleviates most constraints of present proteomic methods and should be equally applicable to the comprehensive analysis of other classes of analytes, beyond proteomics.

Selected reaction monitoring mass spectrometry reveals the dynamics of signaling through the GRB2 adaptor

Signaling pathways are commonly organized through inducible protein-protein interactions, mediated by adaptor proteins that link activated receptors to cytoplasmic effectors. However, we have little quantitative data regarding the kinetics with which such networks assemble and dissolve to generate specific cellular responses. To address this deficiency, we designed a mass spectrometry method, affinity purification–selected reaction monitoring (AP-SRM), which we used to comprehensively and quantitatively investigate changes in protein interactions with GRB2, an adaptor protein that participates in a remarkably diverse set of protein complexes involved in multiple aspects of cellular function. Our data reliably define context-specific and time-dependent networks that form around GRB2 after stimulation, and reveal core and growth factor–selective complexes comprising 90 proteins identified as interacting with GRB2 in HEK293T cells. Capturing a key hub protein and dissecting its interactions by SRM should be equally applicable to quantifying signaling dynamics for a range of hubs in protein interaction networks.

Mapping differential interactomes by affinity purification coupled with data independent mass spectrometry acquisition

Characterizing changes in protein-protein interactions associated with sequence variants (e.g., disease-associated mutations or splice forms) or following exposure to drugs, growth factors or hormones is critical to understanding how protein complexes are built, localized and regulated. Affinity purification (AP) coupled with mass spectrometry permits the analysis of protein interactions under near-physiological conditions, yet monitoring interaction changes requires the development of a robust and sensitive quantitative approach, especially for large-scale studies in which cost and time are major considerations. We have coupled AP to data-independent mass spectrometric acquisition (sequential window acquisition of all theoretical spectra, SWATH) and implemented an automated data extraction and statistical analysis pipeline to score modulated interactions. We used AP-SWATH to characterize changes in protein-protein interactions imparted by the HSP90 inhibitor NVP-AUY922 or melanoma-associated mutations in the human kinase CDK4. We show that AP-SWATH is a robust label-free approach to characterize such changes and propose a scalable pipeline for systems biology studies.

Dimensionality Reduction and Visualization in Principal Component Analysis

Many modern applications of analytical chemistry involve the collection of large megavariate data sets and subsequent processing with multivariate analysis techniques (MVA), two of the more common goals being data analysis (also known as data mining and exploratory data analysis) and classification. Classification attempts to determine variables that can distinguish known classes allowing unknown samples to be correctly assigned, whereas data analysis seeks to uncover and understand or confirm relationships between the samples and the variables. An important part of analysis is visualization which allows analysts to apply their expertise and knowledge and is often easier for the samples than the variables since there are frequently far more of the latter. Here we describe principal component variable grouping (PCVG), an unsupervised, intuitive method that assigns a large number of variables to a smaller number of groups that can be more readily visualized and understood. Knowledge of the source or nature of the variables in a group allows them all to be appropriately treated, for example, removed if they result from uninteresting effects or replaced by a single representative for further processing.

Instrumental and experimental effects in LC-MS-based metabolomics.

The experimental complexity of a metabolomics study can cause uncontrolled variance that is not related to the biological effect being studied and may distort or obscure the data analysis. While some sources can be controlled with good experimental techniques and careful sample handling, others are inherent in the analytical technique used and cannot easily be avoided. We discuss the sources and appearance of some of these artifacts and show ways in which they can be detected using visualization and statistical tools, allowing appropriate treatment prior to multivariate analysis (MVA).

Label-free quantitative proteomics trends for protein-protein interactions.

Understanding protein interactions within the complexity of a living cell is challenging, but techniques coupling affinity purification and mass spectrometry have enabled important progress to be made in the past 15 years. As identification of protein-protein interactions is becoming easier, the quantification of the interaction dynamics is the next frontier. Several quantitative mass spectrometric approaches have been developed to address this issue that vary in their strengths and weaknesses. While isotopic labeling approaches continue to contribute to the identification of regulated interactions, techniques that do not require labeling are becoming increasingly used in the field. Here, we describe the major types of label-free quantification used in interaction proteomics, and discuss the relative merits of data dependent and data independent acquisition approaches in label-free quantification. This article is part of a Special Issue entitled: From protein structures to clinical applications.

Comprehensive analytical strategy for biomarker identification based on liquid chromatography coupled to mass spectrometry and new candidate confirmation tools

A comprehensive analytical LC-MS(/MS) platform for low weight biomarkers molecule in biological fluids is described. Two complementary retention mechanisms were used in HPLC by optimizing the chromatographic conditions for a reversed-phase column and a hydrophilic interaction chromatography column. LC separation was coupled to mass spectrometry by using an electrospray ionization operating in positive polarity mode. This strategy enables us to correctly retain and separate hydrophobic as well as polar analytes. For that purpose artificial model study samples were generated with a mixture of 38 well characterized compounds likely to be present in biofluids. The set of compounds was used as a standard aqueous mixture or was spiked into urine at different concentration levels to investigate the capability of the LC-MS(/MS) platform to detect variations across biological samples. Unsupervised data analysis by principal component analysis was performed and followed by principal component variable grouping to find correlated variables. This tool allows us to distinguish three main groups whose variables belong to (a) background ions (found in all type of samples), (b) ions distinguishing urine samples from aqueous standard and blank samples, (c) ions related to the spiked compounds. Interpretation of these groups allows us to identify and eliminate isotopes, adducts, fragments, etc. and to generate a reduced list of m/z candidates. This list is then submitted to the prototype MZSearcher software tool which simultaneously searches several lists of potential metabolites extracted from metabolomics databases (e.g., KEGG, HMDB, etc) to propose biomarker candidates. Structural confirmation of these candidates was done off-line by fraction collection followed by nanoelectrospray infusion to provide high quality MS/MS data for spectral database queries.

SWATH acquisition mode for drug metabolism and metabolomics investigations

AIM Sequential window acquisition of all theoretical fragment-ion spectra (SWATH) has recently emerged as a powerful high resolution mass spectrometric data independent acquisition technique. In the present work, the potential and challenges of an integrated strategy based on LC-SWATH/MS for simultaneous drug metabolism and metabolomics studies was investigated. METHODOLOGY The richness of SWATH data allows numerous data analysis approaches, including: detection of metabolites by prediction; metabolite detection by mass defect filtering; quantification from high-resolution MS precursor chromatograms or fragment chromatograms. Multivariate analysis can be applied to the data from the full scan or SWATH windows and allows changes in endogenous metabolites as well as xenobiotic metabolites, to be detected. Principal component variable grouping detects intersample variable correlation and groups variables with similar profiles which simplifies interpretation and highlights related ions and fragments. Principal component variable grouping can extract product ion spectra from the data collected by fragmenting a wide precursor ion window. CONCLUSION It was possible to characterize 28 vinpocetine metabolites in urine, mostly mono- and di-hydroxylated forms, and detect endogenous metabolite expression changes in urine after the administration of a single dose of a model drug (vinpocetine) to rats.

Development of a highly automated and multiplexed targeted proteome pipeline and assay for 112 rat brain synaptic proteins

We present a comprehensive workflow for large scale (>1000 transitions/run) label‐free LC‐MRM proteome assays. Innovations include automated MRM transition selection, intelligent retention time scheduling that improves S/N by twofold, and automatic peak modeling. Improvements to data analysis include a novel Q/C metric, normalized group area ratio, MLR normalization, weighted regression analysis, and data dissemination through the Yale protein expression database. As a proof of principle we developed a robust 90 min LC‐MRM assay for mouse/rat postsynaptic density fractions which resulted in the routine quantification of 337 peptides from 112 proteins based on 15 observations per protein. Parallel analyses with stable isotope dilution peptide standards (SIS), demonstrate very high correlation in retention time (1.0) and protein fold change (0.94) between the label‐free and SIS analyses. Overall, our method achieved a technical CV of 11.4% with >97.5% of the 1697 transitions being quantified without user intervention, resulting in a highly efficient, robust, and single injection LC‐MRM assay.