Ronald Mai

Comparison of zirconia and titanium implants after a short healing period. A pilot study in minipigs

The aim of this animal study was to investigate and compare the osseointegration of zirconia and titanium dental implants. 14 one-piece zirconia implants and 7 titanium implants were inserted into the mandibles of 7 minipigs. The zirconia implants were alternately placed submerged and non-submerged. To enable submerged healing, the supraosseous part was removed, using a diamond saw. The titanium implants were all placed submerged. After a healing period of 4 weeks, a histological analysis of the soft and hard tissue and a histomorphometric analysis of the bone-implant contact (BIC) and relative peri-implant bone-volume density (rBVD; relation to bone-volume density of the host bone) was performed. Two zirconia implants were found to be loose. All other implants were available for evaluation. For submerged zirconia and titanium implants, the implant surface showed an intimate connection to the neighbouring bone, with both types achieving a BIC of 53%. For the non-submerged zirconia implants, some crestal epithelial downgrowth could be detected, with a resultant BIC of 48%. Highest rBVD values were found for submerged zirconia (80%), followed by titanium (74%) and non-submerged zirconia (63%). The results suggest that unloaded zirconia and titanium implants osseointegrate comparably, within the healing period studied.

Biological functionalization of dental implants with collagen and glycosaminoglycans—A comparative study

Biological implant surface coatings are an emerging technology to increase bone formation. Such an approach is of special interest in anatomical regions like the maxilla. In the present study, we hypothesized that the coating of titanium implants with components of the organic extracellular matrix increases bone formation and implant stability compared to an uncoated reference. The implants were coated using collagen-I with either two different concentrations of chondroitin sulfate (CS) or two differentially sulfated hyaluronans. Implant coatings were characterized biochemically and with atomic force microscopy. Histomorphometry was used to assess bone-implant contact (BIC) and bone-volume density (BVD) after 4 and 8 weeks of submerged healing in the maxilla of 20 minipigs. Further, implant stability was measured by resonance frequency analysis (RFA). Implants containing the lower CS concentration had significantly more BIC, compared to the uncoated reference at both times of interest. No significant increase was measured from week 4 to 8. Differences in BVD and RFA were statistically not significant. A higher concentration of CS and the application of sulfated hyaluronans showed no comparable increase in BIC. This study demonstrates a positive effect of a specific collagen-glycosaminoglycan combination on early bone formation in vivo.

Increased bone formation around coated implants.

AIM We hypothesized that coating threaded, sandblasted acid-etched titanium implants with collagen and chondroitin sulphate (CS) increases bone formation and implant stability, compared with uncoated controls. MATERIALS AND METHODS Three different implant surface conditions were applied: (1) sandblasted acid-etched (control), (2) collagen/chondroitin sulphate (low-dose--CS1), (3) collagen/chondroitin sulphate (high-dose--CS2). Sixty 9.5 mm experimental implants were placed in the mandible of 20 minipigs. Bone-implant contact (BIC) and relative peri-implant bone-volume density (rBVD--relation to bone-volume density of the host bone) were assessed after 1 and 2 months of submerged healing. Implant stability was measured by resonance frequency analysis (RFA). RESULTS After 1 month, coated implants had significantly more BIC compared with controls (CS1: 68%, p<0.0001, CS2: 63%, p=0.009, control: 52%). The rBVD was lower for all surface conditions, compared with the hostbone. After 2 months, BIC increased for all surfaces. No significant differences were measured (CS1: 71%, p=0.016, CS2: 68%, p=0.67, control: 63%). The rBVD was increased for coated implants. RFA values were 71-77 at implantation, 67-73 after 1 month and 74-75 after 2 months. Differences in rBVD and RFA were not statistically significant. CONCLUSIONS Data analysis suggests that collagen/CS has a positive influence on bone formation after 1 month of endosseous healing.

Ectopic bone formation in nude rats using human osteoblasts seeded poly(3)hydroxybutyrate embroidery and hydroxyapatite-collagen tapes constructs

PURPOSE The aim of this study was to evaluate the ectopic bone formation using tissue engineered cell-seeded constructs with two different scaffolds and primary human maxillary osteoblasts in nude rats over an implantation period of up to 96 days. MATERIAL AND METHODS Collagen I-coated Poly(3)hydroxybutyrate (PHB) embroidery and hydroxyapatite (HAP) collagen tapes were seeded with primary human maxillary osteoblasts (hOB) and implanted into athymic rnu/run rats. A total of 72 implants were placed into the back muscles of 18 rats. 24, 48 and 96 days after implantation, histological and histomorphometric analyses were made. The osteoblastic character of the cells was confirmed by immunocytochemistry and RT-PCR for osteocalcin. RESULTS Histological analysis demonstrated that all cell-seeded constructs induced ectopic bone formation after 24, 48 and 96 days of implantation. There was more mineralized tissue in PHB constructs than in HAP-collagen tapes (at day 24; p < 0.05). Bone formation decreased with the increasing length of the implantation period. Osteocalcin expression verified the osteoblastic character of the cell-seeded constructs after implantation time. No bone formation and no osteocalcin expression were found in the control groups. CONCLUSIONS Cell-seeded constructs either with PHB embroidery or HAP-collagen tapes can induce ectopic bone formation. However, the amount of bone formed decreased with increasing length of implantation.

Surface-conditioned dental implants: an animal study on bone formation.

AIM The aim of this study was to determine whether bone formation around surface-conditioned implants is enhanced compared with non-surface-conditioned sandblasted acid-etched titanium implants. MATERIALS AND METHODS One hundred and forty-four implants were placed in the mandible of 18 minipigs. Before placement, implants were either surface conditioned in a solution containing hydroxide ions (conSF) or assigned to controls. Animals were euthanized after 2, 4 and 8 weeks of submerged healing, the 8-week group receiving polyfluorochrome labelling at week 2, 4, 6 and 8. One jaw quadrant per animal was selected for histological and histomorphometrical evaluation of mineralized bone-implant contact (mBIC), osteoid-implant contact (OIC) and bone volume (BV) analysis. RESULTS Polyfluorochrome labelling showed no general differences in bone dynamics. mBIC showed the most pronounced differences after 2 weeks, reaching 65.5% for conSF compared with 48.1% for controls, p=0.270. Differences levelled out after 4 weeks (67.4% control, 65.7% conSF) and 8 weeks (64.0% control, 70.2% conSF). OIC levels were initially comparable, showing a slower decline for conSF after 4 weeks. BV was higher for conSF at all times. No significant differences could be found. CONCLUSION A tendency towards increased mBIC was shown for surface-conditioned implants after short-term healing.

Histologic study of incorporation and resorption of a bone cement–collagen composite: an in vivo study in the minipig

OBJECTIVE Calcium phosphates are clinically established as bone defect fillers. They have the capability of osseoconduction and are characterized by a slow resorption process. The present study evaluated the suitability of a newly developed calcium phosphate cement modified with collagen type I. STUDY DESIGN The modified cement paste was inserted in differently designed defects of 10 minipigs. Further, an alveolar ridge augmentation was performed, applying the cement paste. The cement hardened in situ during the operation, forming a hydroxyapatite collagen composite. Animals were sacrificed after 1, 3, 6, 12, and 18 months. The tissue integration and resorption process was then evaluated using nondecalcified microsections. All animals were evaluated for histology. RESULTS The implanted material showed osseoconductive characteristics. Resorption started from the edge of the defect zone, and bone substitution followed rapidly. Twelve months after placement of the cement, complete remodeling was observed. CONCLUSION It can be concluded that the applied hydroxyapatite-collagen cement composite shows good resorption and bone integration.

Chondroitin sulfate and sulfated hyaluronan‐containing collagen coatings of titanium implants influence peri‐implant bone formation in a minipig model

An improved osseous integration of dental implants in patients with lower bone quality is of particular interest. The aim of this study was to evaluate the effect of artificial extracellular matrix implant coatings on early bone formation. The coatings contained collagen (coll) in conjunction with either chondroitin sulfate (CS) or sulfated hyaluronan (sHya). Thirty-six screw-type, grit-blasted, and acid-etched titanium implants were inserted in the mandible of 6 minipigs. Three surface states were tested: (1) uncoated control (2) coll/CS (3) coll/sHya. After healing periods of 4 and 8 weeks, bone implant contact (BIC), bone volume density (BVD) as well as osteoid related parameters were measured. After 4 weeks, control implants showed a BIC of 44% which was comparable to coll/CS coated implants (48%) and significantly higher compared to coll/sHya coatings (37%, p = 0.012). This difference leveled out after 8 weeks. No significant differences could be detected for BVD values after 4 weeks and all surfaces showed reduced BVD values after 8 weeks. However, at that time, BVD around both, coll/CS (30%, p = 0.029), and coll/sHya (32%, p = 0.015), coatings was significantly higher compared to controls (22%). The osteoid implant contact (OIC) showed no significant differences after 4 weeks. After 8 weeks OIC for controls was comparable to coll/CS, the latter being significantly higher compared to coll/sHya (0.9% vs. 0.4%, p = 0.012). There were no significant differences in osteoid volume density. In summary, implant surface coatings by the chosen organic components of the extracellular matrix showed a certain potential to influence osseointegration in vivo.

Suitability of differently designed matrix-based implant surface coatings: an animal study on bone formation.

INTRODUCTION The aim of the present study was to assay how bone formation around dental implants is influenced by differently composed collagen matrices and RGD peptide as implant surface coatings compared to a sandblasted titanium surface. MATERIAL AND METHODS Five different implant surface coatings were designed: titanium (sandblasted), collagen type I, collagen type I&III, RGD-peptide, and mineralized collagen. Sixty experimental implants of a square-shaped design were inserted into the mandibles of 12 minipigs, 3 months following extraction of the premolar teeth. During the 6-month study period, sequential polyfluorochrome labeling was performed. After sacrifice, bone implant contact (BIC) was evaluated using histologic and histomorphometric methods. RESULTS New bone formation was observed against all implant surfaces. Polyfluorochrome labeling showed that bone growth started from the host bone in the majority of samples. The highest BIC was measured for collagen I and collagen I/III coated implants; however, significant differences between the coatings could not be found. CONCLUSION Osseointegration was achieved for all implant surfaces. Although a statistically significant increase in BIC could not be demonstrated for the experimental coatings after the 6 months study period, there was also no discernible detrimental effect of the coatings in comparison to the uncoated titanium surfaces.

INION compared with titanium osteosynthesis: a prospective investigation of the treatment of mandibular fractures.

We prospectively studied two groups of 30 patients to assess the outcome of treatment of mandibular fractures with the biodegradable INION system compared with osteosynthesis with titanium miniplates. The degree of occlusion, wound healing, and swelling, were noted preoperatively and at 1 week, 6 weeks, and 6 months postoperatively. All fractures healed uneventfully, both clinically and radiologically, and independently of the osteosynthesis used. We found no long-term disturbance of occlusion, but there were twice as many malocclusions in the INION group at one week. We now use a 3-5 day period of postoperative elastic intermaxillary fixation (IMF) to prevent material deformities. Both groups developed problems with wound healing; with INION adequate soft tissue closure combined with appropriate positioning of the plates prevented this. At 6 months a dense swelling developed in some patients in the INION group as a result of biodegradation of the plates. INION plates were biocompatible and strong enough to treat mandibular fractures.

Change of mRNA amount of myosin heavy chain in masseter muscle after orthognathic surgery of patients with malocclusion

INTRODUCTION Surgical correction of malocclusion changes the force to moment ratio of masticatory muscles inserting at the mandible caused by shortening, lengthening and rotation of the bone following osteotomy. During muscle adaptation the expression of mRNA for the myosin heavy chain (MyHC) of type I and type II fibres may be changed. MATERIAL AND METHODS The adaptation of the masseter muscle was investigated at the mRNA level in 10 patients 6 months after orthognathic surgery in the mandible. The competitive polymerase chain reaction (cPCR) is a suitable method for quantification of MyHC mRNA. For application of this minimal invasive method an amount of 35 mg muscle tissue was sufficient. RESULTS 6 month postoperatively there was a deficiency of about 87% of MyHC mRNA for fibre type I and II in both groups of patients. The deficiency in patients with mesial position of the mandible was higher but not significant different to patients with distal malocclusion. CONCLUSION Patients should use the postoperative interval for training their masticatory muscles. This improves the stability of treatment result and prevents relapse.