Rosario M. P. Colodrero

“Breathing” in Adsorbate-Responsive Metal Tetraphosphonate Hybrid Materials

The structures of various layered calcium tetraphosphonates (CaH6DTMP; H8DTMP=hexamethylenediamine tetrakis(methylenephosphonic acid)), have been determined. Starting from CaH6DTMP.2H2O, thermal treatment and subsequent exposure to NH3 and/or H2O vapors led to four new compounds that showed high storage capacity of guest species between the layers (up to ten H2O/NH3 molecules) and a maximum volume increase of 55 %. The basic building block for these phosphonates consists of an eight-membered ring chelating Ca2+ through two phoshonate groups, and the organic ligand is located within the layers, which are held together by hydrogen bonds. The structural analysis revealed that the uptake/removal of guest species (H2O and NH3) induces significant changes in the framework not only by changing the interlayer distances but also through important conformational changes of the organic ligand. An anisotropic breathing motion could be quantified by the changes of the unit-cell dimensions and ligand arrangements in four crystalline derivatives. Complete characterization revealed the existence of interconversion reactions between the different phases upon gas uptake and release. The observed behavior represents, to the best of our knowledge, the first example of a breathing-like mechanism in metal phosphonates that possess a 2D topology.

Structural Mapping and Framework Interconversions in 1D, 2D, and 3D Divalent Metal R,S-Hydroxyphosphonoacetate Hybrids

Reactions of divalent cations (Mg(2+), Co(2+), Ni(2+), and Zn(2+)) with R,S-hydroxyphosphonoacetic acid (HPAA) in aqueous solutions (pH values ranging 1.0-4.0) yielded a range of crystalline hydrated M-HPAA hybrids. One-dimensional (1D) chain compounds were formed at room temperature whereas reactions conducted under hydrothermal conditions resulted in two-dimensional (2D) layered frameworks or, in some cases, three-dimensional (3D) networks incorporating various alkaline cations. 1D phases with compositions [M{HO(3)PCH(OH)CO(2)}(H(2)O)(2)].2H(2)O (M = Mg, Co, and Zn) were isolated. These compounds were dehydrated in liquid water to yield the corresponding [M{HO(3)PCH(OH)CO(2)}(H(2)O)(2)] compounds lacking the lattice water between the 1D chains. [M{HO(3)PCH(OH)CO(2)}(H(2)O)(2)] (M = Mg, Ni, Co, Zn) compounds were formed by crystallization at room temperature (at higher pH values) or also by partial dehydration of 1D compounds with higher hydration degrees. Complete dehydration of these 1D solids at 240-270 degrees C led to 3D phases, [M{HO3PCH(OH)CO(2)}]. The 2D layered compound [Mg{HO(3)PCH(OH)CO(2)}(H(2)O)(2)] was obtained under hydrothermal conditions. For both synthesis methods, addition of alkali metal hydroxides to adjust the pH usually led to mixed phase materials, whereas direct reactions between the metal oxides and the hydroxyphosphonoacetic acid gave single phase materials. On the other hand, adjusting the pH with acetate salts and increasing the ratio M(2+)/HPAA and/or the A(+)/M(2+) ratio (A = Na, K) resulted in 3D networks, where the alkali cations were incorporated within the frameworks for charge compensation. The crystal structures of eight new M(II)-HPAA hybrids are reported herein and the thermal behavior related to dehydration/rehydration of some compounds are studied in detail.

Divalent metal vinylphosphonate layered materials: compositional variability, structural peculiarities, dehydration behavior, and photoluminescent properties

A family of M-VP (M = Ni, Co, Cd, Mn, Zn, Fe, Cu, Pb; VP = vinylphosphonate) and M-PVP (M = Co, Cd; PVP = phenylvinylphosphonate) materials have been synthesized by hydrothermal methods and characterized by FT-IR, elemental analysis, and thermogravimetric analysis (TGA). Their structures were determined either by single crystal X-ray crystallography or from laboratory X-ray powder diffraction data. The crystal structure of some M-VP and M-PVP materials is two-dimensional (2D) layered, with the organic groups (vinyl or phenylvinyl) protruding into the interlamellar space. However, the Pb-VP and Cu-VP materials show dramatically different structural features. The porous, three-dimensional (3D) structure of Pb-VP contains the Pb center in a pentagonal pyramid. A Cu-VP variant of the common 2D layered structure shows a very peculiar structure. The structure of the material is 2D with the layers based upon three crystallographically distinct Cu atoms; an octahedrally coordinated Cu(2+) atom, a square planar Cu(2+) atom and a Cu(+) atom. The latter has an unusual co-ordination environment as it is 3-coordinated to two oxygen atoms with the third bond across the double bond of the vinyl group. Metal-coordinated water loss was studied by TGA and thermodiffractometry. The rehydration of the anhydrous phases to give the initial phase takes place rapidly for Cd-PVP but it takes several days for Co-PVP. The M-VP materials exhibit variable dehydration-rehydration behavior, with most of them losing crystallinity during the process.

Crystal engineering in confined spaces. A novel method to grow crystalline metal phosphonates in alginate gel systems

In this paper we report a crystal growth method for metal phosphonate frameworks in alginate gels. It consists of a metal-containing alginate gel, in which a solution of phosphonate ligand is slowly diffused. Crystals of metal phosphonate products are formed inside the gel. We have applied this for a variety of metal ions (alkaline-earth metals, transition metals and lanthanides) and a number of polyphosphonic acid and mixed carboxy/phosphonic acid ligands.

2D corrugated magnesium carboxyphosphonate materials: topotactic transformations and interlayer "decoration" with ammonia.

In this paper we report the synthesis and structural characterization of the 2D layered coordination polymer Mg(BPMGLY)(H(2)O)(2) (BPMGLY = bis-phosphonomethylglycine, (HO(3)PCH(2))(2)N(H)COO(2-)). The Mg ion is found in a slightly distorted octahedral environment formed by four phosphonate oxygens and two water molecules. The carboxylate group is deprotonated but noncoordinated. This compound is a useful starting material for a number of topotactic transformations. Upon heating at 140 °C one (of the two) Mg-coordinated water molecule is lost, with the archetype 2D structure maintaining itself. However, the octahedral Mg in Mg(BPMGLY)(H(2)O)(2) is now converted to trigonal bipyramidal in Mg(BPMGLY)(H(2)O). Upon exposure of the monohydrate Mg(BPMGLY)(H(2)O) compound to ammonia, one molecule of ammonia is inserted into the interlayer space and stabilized by hydrogen bonding. The 2D layered structure of the product Mg(BPMGLY)(H(2)O)(NH(3)) is still maintained, with Mg now acquiring a pseudo-octahedral environment. All of these topotactic transformations are also accompanied by changes in hydrogen bonding between the layers.

Synthesis and structural characterization of 2-D layered copper(II) styrylphosphonate coordination polymers

We report the synthesis, physicochemical characterization, and crystal structure of Cu-SP (SP = styrylphosphonic acid, H2O3PCH=CH2(C6H5)), the first reported example of a metal derivative of SP. The starting SP acid was fully characterized by X-ray single-crystal diffractometry, elemental analysis (C and H), 31P-NMR, 13C-NMR, 1H-NMR, HPLC, UV–vis, MS, TG, and FT-IR spectroscopy. The copper(II) derivative was synthesized and characterized by DTA-TG and FT-IR, and also its structure was determined from powder data. The crystal structure was refined by the Rietveld method. The crystal structure of Cu-SP shows a layered 2-D architecture, where the organic moieties are pointed toward the interlamellar space. The inorganic layers are composed of Cu2+ dimers, where the coordination geometry of Cu2+ can be described as distorted trigonal bipyramid. The three coplanar oxygens (O2, O3, and O3) have bond distances of 2.165(9), 1.982(9), and 2.103(11) Å, respectively. The bond lengths for the apical oxygens (O1 and O2) are 1.908(13) and 1.996(11) Å, respectively. Graphical Abstract