Rui W. Krause

Recent trends in the microwave-assisted synthesis of metal oxide nanoparticles supported on carbon nanotubes and their applications

The study of coating carbon nanotubes with metal/oxides nanoparticles is now becoming a promising and challenging area of research. To optimize the use of carbon nanotubes in various applications, it is necessary to attach functional groups or other nanostructures to their surface. The combination of the distinctive properties of carbon nanotubes and metal/oxides is expected to be applied in field emission displays, nanoelectronic devices, novel catalysts, and polymer or ceramic reinforcement. The synthesis of these composites is still largely based on conventional techniques, such as wet impregnation followed by chemical reduction of the metal nanoparticle precursors. These techniques based on thermal heating can be time consuming and often lack control of particle size and morphology. Hence, there is interest in microwave technology recently, where using microwaves represents an alternative way of power input into chemical reactions through dielectric heating. This paper covers the synthesis and applications of carbon-nanotube-coated metal/oxides nanoparticles prepared by a microwave-assisted method. The reviewed studies show that the microwave-assisted synthesis of the composites allows processes to be completed within a shorter reaction time with uniform and well-dispersed nanoparticle formation.

An Exfoliated Graphite-Based Bisphenol A Electrochemical Sensor

The use of an exfoliated graphite (EG) electrode in the square wave voltammetric detection of bisphenol A (a model phenolic pollutant) in water, whereby the phenolic electrode fouling challenge is mitigated, is described. The oxidation peak of BPA was observed at about 0.45 V in phosphate buffer solution at pH 10. The current response exhibited a linear relationship with the concentration over a range from 1.56 μM–50 μM. The detection limit was calculated to be 0.76 μM. The EG electrode surface was renewed after each measurement with excellent reproducibility. A real sample application was also investigated.

Distinctive Interactions of Oleic Acid Covered Magnetic Nanoparticles with Saturated and Unsaturated Phospholipids in Langmuir Monolayers

The growing number of innovations in nanomedicine and nanobiotechnology are posing new challenges in understanding the full spectrum of interactions between nanomateriales and biomolecules at nano-biointerfaces. Although considerable achievements have been accomplished by in vivo applications, many issues regarding the molecular nature of these interactions are far from being well-understood. In this work, we evaluate the interaction of hydrophobic magnetic nanoparticles (MNP) covered with a single layer of oleic acid with saturated and unsaturated phospholipids found in biomembranes through the use of Langmuir monolayers. We find distinctive interactions among the MNP with saturated and unsaturated phospholipids that are reflected by both, the compression isotherms and the surface topography of the films. The interaction between MNP and saturated lipids causes a noticeable reduction of the mean molecular area in the interfacial plane, while the interaction with unsaturated lipids promotes area expansion compared to the ideally mixed films. Moreover, when liquid expanded and liquid condensed phases of the phospholipid(s) coexist, the MNP preferably partition to the liquid-expanded phase, thus hindering the coalescence of the condensed domains with increasing surface pressure. In consequence organizational information on long-range order is attained. These results evidence the existence of a sensitive composition-dependent surface regulation given by phospholipid-nanoparticle interactions which enhance the biophysical relevance of understanding nanoparticle surface functionalization in relation to its interactions in biointerfaces constituted by defined types of biomolecules.

Fluorescent Sensing of Chlorophenols in Water Using an Azo Dye Modified β-Cyclodextrin Polymer

A water soluble azo dye modified β-cyclodextrin polymer 4 was synthesized and used as a chemosensor for the detection of chlorinated phenols, model chlorinated by-products (CBPs) of water treatment for drinking purposes. The characterization of the intermediates and the azo dye modified β-CD polymer was done by UV/Vis Spectrophotometry, FT-IR and 1H-NMR spectroscopies. The chlorophenols were capable of quenching the fluorescence of the polymer. The polymer showed greater sensitivity towards 2,4-dichlorophenol, with a sensitivity factor of 0.35 compared to 0.05 and 0.12 for phenol and 4-chlorophenol, respectively. The stability constants (Ks) of the pollutants were also determined by the Benesi-Hildebrand method to be 2.104 × 103 M−1 for 2,4-dichlorophenol and 1.120 × 102 M−1 for 4-chlorophenol.

Antibacterial activity of the roots, stems and leaves of Alchornea floribunda.

ETHNOPHARMACOLOGICAL RELEVANCE Alchornea floribunda Müll. Arg. is used in traditional medicine across Africa for the treatment of bacterial, fungal, parasitic and inflammatory disorders. AIM OF THE STUDY To evaluate the antibacterial activity of the crude extracts of different plant parts in order to provide a scientific rationale for the proposed broad efficacy of Alchornea floribunda in the treatment of bacterial infections. MATERIALS AND METHODS Extracts of roots, stems and leaves were prepared using solvents of various polarities in order to extract a wide range of phytochemicals. The antibacterial activity of these crude extracts was evaluated by micro-dilution assay, against Gram-positive (i.e. Bacillus cereus, Enterococcus faecalis, Staphylococcus aureus and Staphylococcus saprophyticus) as well as Gram-negative (i.e. Escherichia coli, Klebsiella pneumoniae, Moraxella catarrhalis and Proteus mirabilis) bacteria. RESULTS Generally, the ethanol (EtOH), methanol (MeOH), ethyl acetate (EtOAc) and chloroform (CHCl3) extracts demonstrated the best activities, with the leaves exhibiting the highest average activity for six of the eight pathogens. Of these, the ethanolic leaf extract was the most active against Staphylococcus aureus with an MIC value of 50µg/mL. Some other notable activity was observed for the ethyl acetate and chloroform root extracts against Staphylococcus aureus (50µg/mL), and for selected stem extracts against Staphylococcus aureus (50µg/mL), Klebsiella pneumoniae (63µg/mL) and Staphylococcus saprophyticus (63µg/mL). CONCLUSION This study demonstrates the promising antibacterial activity of Alchornea floribunda against both Gram-positive and Gram-negative bacteria responsible for gastrointestinal, skin, respiratory and urinary ailments, and validates its use in the ethnopharmacology of the region.

Synthesis and magnetic properties of a superparamagnetic nanocomposite pectin-magnetite nanocomposite

Magnetic nanocomposites composed of superparamagnetic magnetite nanoparticles in a pectin matrix were synthesized by an in situ coprecipitation method. The pectin matrix acted as a stabilizer and size control host for the magnetite nanoparticles (MNPs) ensuring particle size homogeneity. The effects of the different reactant ratios and nanocomposite drying conditions on the magnetic properties were investigated. The nanocomposites were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersive X-ray spectroscopy (EDX), Fourier-transform infrared (FT-IR) spectroscopy, and superconducting quantum interference device magnetometer (SQUID). Superparamagnetic magnetite nanoparticles withmean diameters of 9 and 13 nmwere obtained, and the freeze-dried nanocomposites had a saturation magnetization of 54 and 53 emu/g, respectively

Antibacterial effects of Alchornea cordifolia (Schumach. and Thonn.) Müll. Arg extracts and compounds on gastrointestinal, skin, respiratory and urinary tract pathogens.

ETHNOPHARMACOLOGICAL RELEVANCE The leaves, stems and roots of Alchornea cordifolia (Schumach. and Thonn.) Müll. Arg. are used as traditional medicine in many African countries for the management of gastrointestinal, respiratory and urinary tract infections as well as for the treatment of wounds. AIM OF THE STUDY To determine the in vitro antibacterial activity of the crude extracts of leaves and stems of A. cordifolia on gastrointestinal, skin, respiratory and urinary tract pathogens and to identify the compounds in the extracts that may be responsible for this activity. MATERIALS AND METHODS The antibacterial activities of crude extracts [hexane, chloroform (CHCl3), ethyl acetate (EtOAc), ethanol (EtOH), methanol (MeOH) and water (H2O)] as well as pure compounds isolated from these extracts were evaluated by means of the micro-dilution assay against four Gram-positive bacteria, i.e. Bacillus cereus ATCC 11778, Enterococcus faecalis ATCC 29212, Staphylococcus aureus ATCC 25923 and S. saprophyticus ATCC 15305, as well as four Gram-negative bacterial strains, i.e. Escherichia coli ATCC 25922, Klebsiella pneumoniae ATCC 13883, Moraxella catarrhalis ATCC 23246 and Proteus mirabilis ATCC 43071. The isolation of the active constituents was undertaken by bio-autographic assays in conjunction with chromatographic techniques. The identification and characterisation of the isolated compounds were done using mass spectrometry (MS) and Fourier transformed infrared spectrometry (FTIR) as well as 1D- and 2D- nuclear magnetic resonance (NMR) analyses. RESULTS The leaves and stems of A. cordifolia exhibited varied antibacterial activity against all eight pathogens. Most of the MIC values ranged between 63 and 2000µg/ml. The highest activities for the crude extracts (63µg/ml) were observed against S. saprophyticus [stem (EtOAc, CHCl3 and hexane), leaves (MeOH, EtOH, EtOAc and CHCl3)], E. coli [stem (MeOH and EtOH), leaves (MeOH, EtOH, EtOAc and CHCl3)], M. catarrhalis [leaves (EtOAc and CHCl3)], K. pneumoniae [stem (CHCl3), leaves (CHCl3)] and S. aureus [leaves (CHCl3)]. Seven constituents [stigmasterol (1), stigmasta-4,22-dien-3-one (2), friedelin (3), friedelane-3-one-28-al (4), 3-O-acetyl-aleuritolic acid (5), 3-O-acetyl-erythrodiol (6) and methyl-3,4,5-trihydroxybenzoate (methyl gallate) (7)] were isolated from the stem MeOH extract. All these compounds displayed some antibacterial activity against the eight pathogens with highest activity against S. saprophyticus (2µg/ml). Furthermore, this is the first report of compounds 1, 2, 3, 4, 6 and 7 isolated from A. cordifolia and where a complete set of 2D-NMR data for fridelane-3-one-28-al (4) is presented. CONCLUSION The study demonstrated that the antibacterial activities of A. cordifolia extracts may be due to the presence of the seven isolated compounds, where compounds 3-6 showed the best activity. The observed activity against gastrointestinal, skin, respiratory and urinary tract pathogens supports the traditional use for the treatment of such ailments.

Synthesis and characterization of carbon-covered alumina (CCA) supported TiO2 nanocatalysts with enhanced visible light photodegradation of Rhodamine B

The anatase phase of titania (TiO2) nano-photocatalysts was prepared using a modified sol gel process and thereafter embedded on carbon-covered alumina supports. The carbon-covered alumina (CCA) supports were prepared via the adsorption of toluene 2,4-diisocyanate (TDI) on the surface of the alumina. TDI was used as the carbon source for the first time for the carbon-covered alumina support system. The adsorption of TDI on alumina is irreversible; hence, the resulting organic moiety can undergo pyrolysis at high temperatures resulting in the formation of a carbon coating on the surface of the alumina. The TiO2 catalysts were impregnated on the CCA supports. X-ray diffraction analysis indicated that the carbon deposited on the alumina was not crystalline and also showed the successful impregnation of TiO2 on the CCA supports. In the Raman spectra, it could be deduced that the carbon was rather a conjugated olefinic or polycyclic hydrocarbons which can be considered as molecular units of a graphitic plane. The Raman analysis of the catalysed CCAs showed the presence of both the anatase titania and D and G band associated with the carbon of the CCAs. The scanning electron microscope micrographs indicated that the alumina was coated by a carbon layer and the energy dispersive X-ray spectra showed the presence of Al, O and C in the CCA samples, with the addition of Ti for the catalyst impregnated supports. The Brunauer Emmet and Teller surface area analysis showed that the incorporating of carbon on the alumina surface resulted in an increase in surface area, while the impregnation with TiO2 resulted in a further increase in surface area. However, a decrease in the pore volume and diameter was observed. The photocatalytic activity of the nanocatalysts was studied for the degradation of Rhodamine B dye. The CCA-TiO2 nanocatalysts were found to be more photocatalytically active under both visible and UV light irradiation compared to the free TIO2 nanocatalysts.

Detailed investigation of a γ-cyclodextrin inclusion complex with l-thyroxine for improved pharmaceutical formulations

Thyroxine is a naturally occurring human hormone produced by the thyroid gland. Clinical applications of thyroxine to treat several chronic disorders are limited by poor water solubility and instability under physiological conditions. An inclusion complex of levo-thyroxine (l-thyroxine), the active form of the hormone with gamma cyclodextrin (γ-CD) has been obtained and studied with the aim of improving oral delivery rather than the injection formulation of the sodium salt. In addition to greater patient acceptability, inclusion complexes often improve aqueous solubility and bioavailability, stability, and reduce toxicity of drugs, thus providing enhanced pharmaceutical formulations. Physicochemical characterization of the inclusion complex was carried out using Fourier transform infrared spectroscopy, X-ray diffractometry, differential scanning calorimetry, scanning electron microscopy and proton nuclear magnetic resonance spectroscopy. Intermolecular dipolar interactions for the inclusion complex were also studied using 2 dimensional ROESY experiments. Formation of the inclusion complex between the protons H3 and H5 of cyclodextrin with aromatic protons of thyroxine was confirmed by their dipolar interaction. Molecular modelling was used to understand the basis for the complex formation and predict the formation of other complexes. Interestingly, we found that l-thyroxine forms an inclusion complex only with the larger γ-CD and not with other available alpha and beta forms.

Steam activation, characterisation and adsorption studies of activated carbon from maize tassels

In this paper, steam-produced activated carbon (STAC) from maize tassel (MT) was evaluated for its ability to remove basic dye (methylene blue MB) from aqueous solution in a batch adsorption process. The equilibrium experiments were conducted in the range of 50–300 mg/L initial MB concentrations at 30°C, for effect of pH, adsorbent dosage and contact time. The experimental data were analysed by Langmuir, Freundlich and Temkin isotherm models of adsorption. Freundlich adsorption isotherm was found to have highest value of R2(R2=0.97) compared to other models of Langmuir and Temkin having (0.96 and 0.95 respectively). STAC has a high adsorptive capacity for MB dye (200 mg/g) and also showed favourable adsorption for the dye with the separation factor (RL<1) for the dye-activated carbon system. The kinetic data obtained were analysed using pseudo first-order kinetic equation and pseudo second-order kinetic equation. The experimental data fitted well into pseudo second-order kinetic equation, as demonstrated by the high value of R2.