Russell Lake

Quantum-circuit Refrigerator

Quantum technology promises revolutionizing applications in information processing, communications, sensing and modelling. However, efficient on-demand cooling of the functional quantum degrees of freedom remains challenging in many solid-state implementations, such as superconducting circuits. Here we demonstrate direct cooling of a superconducting resonator mode using voltage-controllable electron tunnelling in a nanoscale refrigerator. This result is revealed by a decreased electron temperature at a resonator-coupled probe resistor, even for an elevated electron temperature at the refrigerator. Our conclusions are verified by control experiments and by a good quantitative agreement between theory and experimental observations at various operation voltages and bath temperatures. In the future, we aim to remove spurious dissipation introduced by our refrigerator and to decrease the operational temperature. Such an ideal quantum-circuit refrigerator has potential applications in the initialization of quantum electric devices. In the superconducting quantum computer, for example, fast and accurate reset of the quantum memory is needed.

Quantum-limited heat conduction over macroscopic distances

The emerging quantum technological apparatuses1, 2, such as the quantum computer3–6, call for extreme performance in thermal engineering7. Cold distant heat sinks are needed for the quantized electric degrees of freedom due to the increasing packaging density and heat dissipation. Importantly, quantum mechanics sets a fundamental upper limit for the flow of information and heat, which is quantified by the quantum of thermal conductance8–10. However, the short distance between the heat-exchanging bodies in the previous experiments11–14 hinders their applicability in quantum technology. Here, we present experimental observations of quantum-limited heat conduction over macroscopic distances extending to a metre. We achieved this improvement of four orders of magnitude in the distance by utilizing microwave photons travelling in superconducting transmission lines. Thus, it seems that quantum-limited heat conduction has no fundamental distance cutoff. This work establishes the integration of normal-metal components into the framework of circuit quantum electrodynamics15–17 which provides a basis for the superconducting quantum computer18–21. Especially, our results facilitate remote cooling of nanoelectronic devices using far-away in-situ-tunable heat sinks22, 23. Furthermore, quantum-limited heat conduction is important in contemporary thermodynamics24, 25. Here, the long distance may lead to ultimately efficient mesoscopic heat engines with promising practical applications26.

Flux-tunable phase shifter for microwaves

We introduce a magnetic-flux-tunable phase shifter for propagating microwave photons, based on three equidistant superconducting quantum interference devices (SQUIDs) on a transmission line. We experimentally implement the phase shifter and demonstrate that it produces a broad range of phase shifts and full transmission within the experimental uncertainty. Together with previously demonstrated beam splitters, this phase shifter can be utilized to implement arbitrary single-qubit gates for qubits based on propagating microwave photons. These results complement previous demonstrations of on-demand single-photon sources and detectors, and hence assist in the pursuit of an all-microwave quantum computer based on propagating photons.

Microwave nanobolometer based on proximity Josephson junctions

We introduce a microwave bolometer aimed at high-quantum-efficiency detection of wave packet energy within the framework of circuit quantum electrodynamics, the ultimate goal being single microwave photon detection. We measure the differential thermal conductance between the detector and its heat bath, obtaining values as low as 5 fW/K at 50 mK. This is one tenth of the thermal conductance quantum and corresponds to a theoretical lower bound on noise-equivalent-power of order

A hyperthermal energy ion beamline for probing hot electron chemistry at surfaces

10^{-20}

Towards hot electron mediated charge exchange in hyperthermal energy ion–surface interactions

W/\sqrt{\mbox{Hz}}

Single qubit operations using microwave hyperbolic secant pulses

at 50 mK. By measuring the differential thermal conductance of the same bolometer design in qualitatively different environments and materials, we determine that electron--photon coupling dominates the thermalization of our nanobolometer.

Flux-tunable heat sink for quantum electric circuits

An ultrahigh vacuum ion beamline and chamber have been assembled to produce hyperthermal (<400 eV) energy ions for studying hot electron chemistry at surfaces. The specific design requirements for this modified instrument were chosen to enable the exposure of a metal-oxide-semiconductor (MOS) device to monoenergtic, well-collimated beams of alkali ions while monitoring both the scattered beam flux and the device characteristics. Our goal is to explore the role that hot electrons injected toward the MOS device surface play in the neutralization of scattered ions. To illustrate the functionality of our system, we present energy-resolved spectra for Na+, K+, and Cs+ ions scattered from the surface of a Ag(001) single crystal for a range of incident energies. In addition, we show MOS device current-voltage characteristics measured in situ in a new rapid-turnaround load lock and sample translation stage.

Enhanced superconducting transition temperature in electroplated rhenium

Fabrication of sub-micron Josephson junctions is demonstrated using standard processing techniques for high-coherence, superconducting qubits. These junctions are made in two separate lithography steps with normal-angle evaporation. Most significantly, this work demonstrates that it is possible to achieve high coherence with junctions formed on aluminum surfaces cleaned in situ by Ar plasma before junction oxidation. This method eliminates the angle-dependent shadow masks typically used for small junctions. Therefore, this is conducive to the implementation of typical methods for improving margins and yield using conventional CMOS processing. The current method uses electron-beam lithography and an additive process to define the top and bottom electrodes. Extension of this work to optical lithography and subtractive processes is discussed.