Rustem Zairov

Cloud point extraction of lanthanide(III) ions via use of Triton X-100 without and with water-soluble calixarenes as added chelating agents

The use of water-soluble calixarenes: p-sulfonato thiacalixarene (ST), tetra-sulfonatomethylated calix[4]resorcinarene (SR), calix[4]resorcinarene phosphonic acid (PhR) as chelating agents in cloud point extraction (CPE) of La(III), Gd(III) and Yb(III) ions using Triton X-100 as non-ionic surfactant is introduced. The data obtained indicate that both complexation ability and structure of calixarenes govern the extraction efficiency of lanthanides. In particular ST and SR, forming 1:1 lanthanide complexes with similar stability in aqueous media, exhibit different extractability when used as chelating agents in CPE. First synthesized PhR was found to be the most efficient chelating agent exhibiting pH-dependent selectivity within La(III), Gd(III) and Yb(III) in CPE.

Synthesis and photophysical properties of colloids fabricated by the layer-by-layer polyelectrolyte assembly onto Eu(III) complex as a core

The luminescent colloids have been synthesized through the layer-by-layer assembly of poly(sodium 4-styrenesulfonate) (PSS) and polyethyleneimine (PEI) onto the luminescent core. The latter has been obtained by the reprecipitation of complex Eu[(TTA)(3)1] (where TTA(-) and 1 are thenoyltrifluoroacetonate and 2-(5-chlorophenyl-2-hydroxy)-2-phenylethenyl-bis-(2-methoxyphenyl)phosphine oxide, respectively) from organic solvent to aqueous solution. The variation of Eu(III) complexes indicates the role of the complex core in the development of such core-shell colloids. Complex Eu[(TTA)(3)1] is most convenient precursor of Eu-doped luminescent nanocomposites. The fluorometric measurements at each step of the layer-by-layer polyelectrolyte assembly onto Eu[(TTA)(3)1] core, at various pHs and additives reveal the quenching of Eu-centered luminescence as a result of the interfacial interaction of the core and the dye. The AFM images and electrochemical behavior of PSS-(PEI-PSS)(n)-Eu[(TTA)(3)1] colloids deposited on the surface indicate the stability of the polyelectrolyte multilayer in the dried state.

A facile synthetic route to convert Tb(III) complexes of novel tetra-1,3-diketone calix[4]resorcinarene into hydrophilic luminescent colloids

The work presents the synthesis of a novel calix[4]resorcinarene cavitand bearing four 1,3-diketone groups at the upper rim and its complex formation with Tb(III) ions in DMF and DMSO solutions. Electrospray ionization mass spectra, 1H NMR, UV-Vis and luminescence spectra indicate a long (three hours at least) equilibration time for the complex formation between the cavitand and Tb(III) in alkaline DMF and DMSO solutions. These results are explained by the restricted keto–enol conversion, resulting from the steric hindrance effect of the methylenedioxy-groups linking the benzene rings within the cavitand framework. A facile synthetic route to convert luminescent Tb(III) complexes of various stoichiometries into luminescent hydrophilic colloids is disclosed in this work. The route is based on the reprecipitation of the Tb(III) complexes from DMF to aqueous solutions with further polyelectrolyte deposition without prior separation of the luminescent complexes. The luminescent colloids exhibit high stability over time and in buffer systems, which is a prerequisite for their applicability in analysis and biolabeling.

Determination of fluoroquinolone antibiotics through the fluorescent response of Eu(III) based nanoparticles fabricated by layer-by-layer technique

The present work introduces the determination of fluoroquinolone antibiotics (FQs) in aqueous solutions through the fluorescent response of Eu(TTA)3 and [Eu(TTA)(3)1] (TTA(-) and 1 are thenoyltrifluoroacetonate and phosphine oxide derivative) complexes encapsulated into the polyelectrolyte capsules fabricated through layer-by-layer deposition of poly(sodium 4-styrenesulfonate) (PSS) and polyethyleneimine (PEI). The variation of luminescent core, polyelectrolyte deposition and concentration conditions reveals two modes of fluorescent response on FQs of diverse structure namely the sensitization and quenching of Eu(III) centered luminescence. The obtained regularities reveal the ternary complex formation and the ligand exchange occurring at the interface of polyelectrolyte coated [Eu(TTA)(3)1] based colloids as the reasons of the diverse fluorescent response of Eu(III) centered luminescence on FQs. The factors affecting the fluorescent response have been revealed, which are: the content of luminescent core, the mode of polyelectrolyte deposition, concentration and structure of FQs. The discrimination of moxifloxacin and lomefloxacin from levofloxacin, ofloxacin, difloxacin, perfloxacin through the quenching of Eu(III) luminescence in PSS-[Eu(TTA)(3)1] colloids has been revealed.

High performance magneto-fluorescent nanoparticles assembled from terbium and gadolinium 1,3-diketones

Polyelectrolyte-coated nanoparticles consisting of terbium and gadolinium complexes with calix[4]arene tetra-diketone ligand were first synthesized. The antenna effect of the ligand on Tb(III) green luminescence and the presence of water molecules in the coordination sphere of Gd(III) bring strong luminescent and magnetic performance to the core-shell nanoparticles. The size and the core-shell morphology of the colloids were studied using transmission electron microscopy and dynamic light scattering. The correlation between photophysical and magnetic properties of the nanoparticles and their core composition was highlighted. The core composition was optimized for the longitudinal relaxivity to be greater than that of the commercial magnetic resonance imaging (MRI) contrast agents together with high level of Tb(III)-centered luminescence. The tuning of both magnetic and luminescent output of nanoparticles is obtained via the simple variation of lanthanide chelates concentrations in the initial synthetic solution. The exposure of the pheochromocytoma 12 (PC 12) tumor cells and periphery human blood lymphocytes to nanoparticles results in negligible effect on cell viability, decreased platelet aggregation and bright coloring, indicating the nanoparticles as promising candidates for dual magneto-fluorescent bioimaging.

Hydration number: crucial role in nuclear magnetic relaxivity of Gd(III) chelate-based nanoparticles

Today, nanostructure-based contrast agents (CA) are emerging in the field of magnetic resonance imaging (MRI). Their sensitivity is reported as greatly improved in comparison to commercially used chelate-based ones. The present work is aimed at revealing the factors governing the efficiency of longitudinal magnetic relaxivity (r1) in aqueous colloids of core-shell Gd(III)-based nanoparticles. We report for the first time on hydration number (q) of gadolinium(III) as a substantial factor in controlling r1 values of polyelectrolyte-stabilized nanoparticles built from water insoluble complexes of Gd(III). The use of specific complex structure enables to reveal the impact of the inner-sphere hydration number on both r1 values for the Gd(III)-based nanoparticles and the photophysical properties of their luminescent Tb(III) and Eu(III) counterparts. The low hydration of TTA-based Gd(III) complexes (q ≈ 1) agrees well with the poor relaxivity values (r1 = 2.82 mM−1s−1 and r2 = 3.95 mM−1s−1), while these values tend to increase substantially (r1 = 12.41 mM−1s−1, r2 = 14.36 mM−1s−1) for aqueous Gd(III)-based colloids, when macrocyclic 1,3-diketonate is applied as the ligand (q ≈ 3). The regularities obtained in this work are fundamental in understanding the efficiency of MRI probes in the fast growing field of nanoparticulate contrast agents.

Tuning the non-covalent confinement of Gd(III) complexes in silica nanoparticles for high T1-weighted MR imaging capability

The present work introduces deliberate synthesis of Gd(III)-doped silica nanoparticles with high relaxivity at magnetic field strengths below 1.5T. Modified microemulsion water-in-oil procedure was used in order to achieve superficial localization of Gd(III) complexes within 40-55nm sized silica spheres. The relaxivities of the prepared nanoparticles were measured at 0.47, 1.41 and 1.5T with the use of both NMR analyzer and whole body NMR scanner. Longitudinal relaxivities of the obtained silica nanoparticles reveal significant dependence on the confinement mode, changing from 4.1 to 49.6mM-1s-1 at 0.47T when the localization of Gd(III) complexes changes from core to superficial zones of the silica spheres. The results highlight predominant contribution of the complexes located close to silica/water interface to the relaxivity of the nanoparticles. Low effect of blood proteins on the relaxivity in the aqueous colloids of the nanoparticles was exemplified by serum bovine albumin. T1- weighted MRI data indicate that the nanoparticles provide strong positive contrast at 1.5T, which along with low cytotoxicity effect make a good basis for their application as contrast agents.

Polymethoxyphenyl-substituted [2-(5-chloro-2-hydroxy-4-methylphenyl)-2-phenylvinyl]phosphine oxides: Synthesis and complexation with Eu(TTA)3

New di- and trimethoxyphenyl-substituted phosphorus-containing ligands, (Z)-[2-(5-chloro-2-hydroxy-4-methylphenyl)-2-phenylvinyl]bis(3,4-di- and 3,4,5-trimethoxyphenyl)phosphine oxides, have been synthesized, and their adducts with europium(III) 2-thenoyltrifluoroacetonate have been obtained. High luminescence intensity of the synthesized complexes suggests prospects in using them for the design of various materials possessing unique photophysical properties.

Polyelectrolyte-coated ultra-small nanoparticles with Tb(III)-centered luminescence as cell labels with unusual charge effect on their cell internalization

The present work reports ultra-small polyelectrolyte-coated water insoluble Tb(III) complex species with bright Tb(III)-centered luminescence resulted from efficient ligand-to-metal energy transfer as efficient labels for Hep-2 cells. The flow cytometry data revealed the enhanced cellular uptake of negatively charged nanoparticles coated by the polystyrenesulfonate (PSS)-monolayer versus the positively charged nanoparticles. The latter are obtained by layer-by-layer deposition of polyethyleneimine (PEI) onto PSS-coated ones. Confocal and TEM images of Hep-2 cells exposed by the colloids confirm favorable cell internalization of the PSS- compared to PEI-PSS-coated colloids illustrating unusual charge-effect. Dynamic light scattering data indicate significant effect of the biological background exemplified by serum bovine albumin and phosphatidylcholine-based bilayers on the exterior charge and aggregation behavior of the colloids. The obtained results reveal the PSS-coated nanoparticles based on water insoluble Tb(III) complex as promising cell labels.

Silica-supported silver nanoparticles as an efficient catalyst for aromatic C-H alkylation and fluoroalkylation

The efficient catalysis of oxidative alkylation and fluoroalkylation of aromatic C-H bonds is of paramount importance in the pharmaceutical and agrochemical industries, and requires the development of convenient Ag0-based nano-architectures with high catalytic activity and recyclability. We prepared Ag-doped silica nanoparticles (Ag0/+@SiO2) with a specific nano-architecture, where ultra-small sized silver cores are immersed in silica spheres, 40 nm in size. The nano-architecture provides an efficient electrochemical oxidation of Ag+@SiO2 without any external oxidant. In turn, Ag+@SiO2 5 mol% results in 100% conversion of arenes into their alkylated and fluoroalkylated derivatives in a single step at room temperature under nanoheterogeneous electrochemical conditions. Negligible oxidative leaching of silver from Ag0/+@SiO2 is recorded during the catalytic coupling of arenes with acetic, difluoroacetic and trifluoroacetic acids, which enables the good recyclability of the catalytic function of the Ag0/+@SiO2 nanostructure. The catalyst can be easily separated from the reaction mixture and reused a minimum of five times upon electrochemical regeneration. The use of the developed Ag0@SiO2 nano-architecture as a heterogeneous catalyst facilitates aromatic C-H bond substitution by alkyl and fluoroalkyl groups, which are privileged structural motifs in pharmaceuticals and agrochemicals.