Ryan E. Mewis

Iridium N-heterocyclic carbene complexes as efficient catalysts for magnetization transfer from para-hydrogen.

While the characterization of materials by NMR is hugely important in the physical and biological sciences, it also plays a vital role in medical imaging. This success is all the more impressive because of the inherently low sensitivity of the method. We establish here that [Ir(H)2(IMes)(py)3]Cl undergoes both pyridine (py) loss as well as the reductive elimination of H2. These reversible processes bring para-H2 and py into contact in a magnetically coupled environment, delivering an 8100-fold increase in 1H NMR signal strength relative to non-hyperpolarized py at 3 T. An apparatus that facilitates signal averaging has been built to demonstrate that the efficiency of this process is controlled by the strength of the magnetic field experienced by the complex during the magnetization transfer step. Thermodynamic and kinetic data combined with DFT calculations reveal the involvement of [Ir(H)2(η2-H2)(IMes)(py)2]+, an unlikely yet key intermediate in the reaction. Deuterium labeling yields an additional 60% improvement in signal, an observation that offers insight into strategies for optimizing this approach.

Application of Parahydrogen Induced Polarization Techniques in NMR Spectroscopy and Imaging

Magnetic resonance provides a versatile platform that allows scientists to examine many different types of phenomena. However, the sensitivity of both NMR spectroscopy and MRI is low because the detected signal strength depends on the population difference that exists between the probed nuclear spin states in a magnetic field. This population difference increases with the strength of the interacting magnetic field and decreases with measurement temperature. In contrast, hyperpolarization methods that chemically introduce parahydrogen (a spin isomer of hydrogen with antiparallel spins that form a singlet) based on the traditional parahydrogen induced polarization (PHIP) approach tackle this sensitivity problem with dramatic results. In recent years, the potential of this method for MRI has been recognized, and its impact on medical diagnosis is starting to be realized. In this Account, we describe the use of parahydrogen to hyperpolarize a suitable substrate. This process normally involves the introduction of a molecule of parahydrogen into a target to create large population differences between nuclear spin states. The reaction of parahydrogen breaks the original magnetic symmetry and overcomes the selection rules that prevent both NMR observation and parahydrogen/orthohydrogen interconversion, yielding access to the normally invisible hyperpolarization associated with parahydrogen. Therefore the NMR or MRI measurement delivers a marked increase in the detected signal strength over the normal Boltzmann-population derived result. Consequently, measurements can be made which would otherwise be impossible. This approach was pioneered by Weitekamp, Bargon, and Eisenberg, in the late 1980s. Since 1993, we have used this technique in York to study reaction mechanisms and to characterize normally invisible inorganic species. We also describe signal amplification by reversible exchange (SABRE), an alternative route to sensitize molecules without directly incorporating a molecule of parahydrogen. This approach widens the applicability of PHIP methods and the range of materials that can be hyperpolarized. In this Account we describe our parahydrogen studies in York over the last 20 years and place them in a wider context. We describe the characterization of organometallic reaction intermediates including those involved in catalytic reactions, either with or without hydride ligands. The collection of spectroscopic and kinetic data with rapid inverse detection methods has proved to be particularly informative. We can see enhanced signals for the organic products of catalytic reactions that are linked directly to the catalytic intermediates that form them. This method can therefore prove unequivocally that a specific metal complex is involved in a catalytic cycle, thus pinpointing the true route to catalysis. Studies where a pure nuclear spin state is detected show that it is possible to detect all of the analyte molecules present in a sample using NMR. In addition, we describe methods that achieve the selective detection of these enhanced signals, when set against a strong NMR background such as that of water.

Optimization of SABRE for polarization of the tuberculosis drugs pyrazinamide and isoniazid

Hyperpolarization produces nuclear spin polarization that is several orders of magnitude larger than that achieved at thermal equilibrium thus providing extraordinary contrast and sensitivity. As a parahydrogen induced polarization (PHIP) technique that does not require chemical modification of the substrate to polarize, Signal Amplification by Reversible Exchange (SABRE) has attracted a lot of attention. Using a prototype parahydrogen polarizer, we polarize two drugs used in the treatment of tuberculosis, namely pyrazinamide and isoniazid. We examine this approach in four solvents, methanol-d4, methanol, ethanol and DMSO and optimize the polarization transfer magnetic field strength, the temperature as well as intensity and duration of hydrogen bubbling to achieve the best overall signal enhancement and hence hyperpolarization level.

Toward Biocompatible Nuclear Hyperpolarization Using Signal Amplification by Reversible Exchange: Quantitative in Situ Spectroscopy and High-Field Imaging

Signal amplification by reversible exchange (SABRE) of a substrate and parahydrogen at a catalytic center promises to overcome the inherent insensitivity of magnetic resonance. In order to apply the new approach to biomedical applications, there is a need to develop experimental equipment, in situ quantification methods, and a biocompatible solvent. We present results detailing a low-field SABRE polarizer which provides well-controlled experimental conditions, defined spins manipulations, and which allows in situ detection of thermally polarized and hyperpolarized samples. We introduce a method for absolute quantification of hyperpolarization yield in situ by means of a thermally polarized reference. A maximum signal-to-noise ratio of ∼103 for 148 μmol of substance, a signal enhancement of 106 with respect to polarization transfer field of SABRE, or an absolute 1H-polarization level of ≈10–2 is achieved. In an important step toward biomedical application, we demonstrate 1H in situ NMR as well as 1H and 13C high-field MRI using hyperpolarized pyridine (d3) and 13C nicotinamide in pure and 11% ethanol in aqueous solution. Further increase of hyperpolarization yield, implications of in situ detection, and in vivo application are discussed.

A hyperpolarized equilibrium for magnetic resonance.

Nuclear magnetic resonance spectroscopy and imaging (MRI) play an indispensable role in science and healthcare but use only a tiny fraction of their potential. No more than ≈10 p.p.m. of all 1H nuclei are effectively detected in a 3-Tesla clinical MRI system. Thus, a vast array of new applications lays dormant, awaiting improved sensitivity. Here we demonstrate the continuous polarization of small molecules in solution to a level that cannot be achieved in a viable magnet. The magnetization does not decay and is effectively reinitialized within seconds after being measured. This effect depends on the long-lived, entangled spin-order of parahydrogen and an exchange reaction in a low magnetic field of 10−3 Tesla. We demonstrate the potential of this method by fast MRI and envision the catalysis of new applications such as cancer screening or indeed low-field MRI for routine use and remote application.

Utilization of SABRE-Derived Hyperpolarization To Detect Low-Concentration Analytes via 1D and 2D NMR Methods

The characterization of materials by the inherently insensitive method of NMR spectroscopy plays a vital role in chemistry. Increasingly, hyperpolarization is being used to address the sensitivity limitation. Here, by reference to quinoline, we illustrate that the SABRE hyperpolarization technique, which uses para-hydrogen as the source of polarization, enables the rapid completion of a range of NMR measurements. These include the collection of (13)C, (13)C{(1)H}, and NOE data in addition to more complex 2D COSY, ultrafast 2D COSY and 2D HMBC spectra. The observations are made possible by the use of a flow probe and external sample preparation cell to re-hyperpolarize the substrate between transients, allowing repeat measurements to be made within seconds. The potential benefit of the combination of SABRE and 2D NMR methods for rapid characterization of low-concentration analytes is therefore established.

Hyperpolarisation through reversible interactions with parahydrogen

We describe here how the complexes Ir(COD)(NHC)Cl [NHC = IMes, SIMes, IPr, SIPr, ICy, IMe and ImMe2NPri2] provide significant insight into the catalytic process that underpins the hyperpolarization method signal amplification by reversible exchange (SABRE). These complexes react with pyridine and H2 to produce [Ir(H)2(NHC)(py)3]Cl which undergo ligand exchange on a timescale commensurate with good catalytic activity for the signal amplification by reversible exchange effect. This activity results from hydride ligand magnetic inequivalence and is highly dependent on the NHC. Variable temperature and kinetic studies demonstrate that rates of ligand loss which lie between 0.1 and 0.5 s−1 are ideal for catalysis. A role for the solvent complex [Ir(H)2(MeOH)(NHC)(py)2]Cl, which contains chemically inequivalent hydride ligands is revealed in the ligand exchange pathway. By optimisation of the conditions and NHC, a 5500-fold total pyridine signal enhancement is revealed when the NHC is IMes. Both T1-reduction effects and HD exchange with the solvent are probed and shown to link to catalyst efficiency. The resulting signal enhancements suggest future in vivo MRI measurements under physiological conditions using this catalytic effect will be possible.

Strategies for the hyperpolarization of acetonitrile and related ligands by SABRE.

We report on a strategy for using SABRE (signal amplification by reversible exchange) for polarizing 1H and 13C nuclei of weakly interacting ligands which possess biologically relevant and nonaromatic motifs. We first demonstrate this via the polarization of acetonitrile, using Ir(IMes)(COD)Cl as the catalyst precursor, and confirm that the route to hyperpolarization transfer is via the J-coupling network. We extend this work to the polarization of propionitrile, benzylnitrile, benzonitrile, and trans-3-hexenedinitrile in order to assess its generality. In the 1H NMR spectrum, the signal for acetonitrile is enhanced 8-fold over its thermal counterpart when [Ir(H)2(IMes)(MeCN)3]+ is the catalyst. Upon addition of pyridine or pyridine-d5, the active catalyst changes to [Ir(H)2(IMes)(py)2(MeCN)]+ and the resulting acetonitrile 1H signal enhancement increases to 20- and 60-fold, respectively. In 13C NMR studies, polarization transfers optimally to the quaternary 13C nucleus of MeCN while the methyl 13C is hardly polarized. Transfer to 13C is shown to occur first via the 1H–1H coupling between the hydrides and the methyl protons and then via either the 2J or 1J couplings to the respective 13Cs, of which the 2J route is more efficient. These experimental results are rationalized through a theoretical treatment which shows excellent agreement with experiment. In the case of MeCN, longitudinal two-spin orders between pairs of 1H nuclei in the three-spin methyl group are created. Two-spin order states, between the 1H and 13C nuclei, are also created, and their existence is confirmed for Me13CN in both the 1H and 13C NMR spectra using the Only Parahydrogen Spectroscopy protocol.

Probing signal amplification by reversible exchange using an NMR flow system.

Hyperpolarization methods are used in NMR to overcome its inherent sensitivity problem. Herein, the biologically relevant target nicotinamide is polarized by the hyperpolarization technique signal amplification by reversible exchange. We illustrate how the polarization transfer field, and the concentrations of parahydrogen, the polarization‐transfer‐catalyst and substrate can be used to maximize signal amplification by reversible exchange effectiveness by reference to the first‐order spin system of this target. The catalyst is shown to be crucial in this process, first by facilitating the transfer of hyperpolarization from parahydrogen to nicotinamide and then by depleting the resulting polarized states through further interaction. The 15 longitudinal one, two, three and four spin order terms produced are rigorously identified and quantified using an automated flow apparatus in conjunction with NMR pulse sequences based on the only parahydrogen spectroscopy protocol. The rates of build‐up of these terms were shown to follow the order four~three > two > single spin; this order parallels their rates of relaxation. The result of these competing effects is that the less‐efficiently formed single‐spin order terms dominate at the point of measurement with the two‐spin terms having amplitudes that are an order of magnitude lower. We also complete further measurements to demonstrate that 13C NMR spectra can be readily collected where the long‐lived quaternary 13C signals appear with significant intensity. These are improved upon by using INEPT. In summary, we dissect the complexity of this method, highlighting its benefits to the NMR community and its applicability for high‐sensitivity magnetic resonance imaging detection in the future.

Iridium(III) hydrido N-heterocyclic carbene-phosphine complexes as catalysts in magnetization transfer reactions.

The hyperpolarization (HP) method signal amplification by reversible exchange (SABRE) uses para-hydrogen to sensitize substrate detection by NMR. The catalyst systems [Ir(H)2(IMes)(MeCN)2(R)]BF4 and [Ir(H)2(IMes)(py)2(R)]BF4 [py = pyridine; R = PCy3 or PPh3; IMes = 1,3-bis(2,4,6-trimethylphenyl)imidazol-2-ylidene], which contain both an electron-donating N-heterocyclic carbene and a phosphine, are used here to catalyze SABRE. They react with acetonitrile and pyridine to produce [Ir(H)2(NCMe)(py)(IMes)(PPh3)]BF4 and [Ir(H)2(NCMe)(py)(IMes)(PCy3)]BF4, complexes that undergo ligand exchange on a time scale commensurate with observation of the SABRE effect, which is illustrated here by the observation of both pyridine and acetonitrile HP. In this study, the required symmetry breaking that underpins SABRE is provided for by the use of chemical inequivalence rather than the previously reported magnetic inequivalence. As a consequence, we show that the ligand sphere of the polarization transfer catalyst itself becomes hyperpolarized and hence that the high-sensitivity detection of a number of reaction intermediates is possible. These species include [Ir(H)2(NCMe)(py)(IMes)(PPh3)]BF4, [Ir(H)2(MeOH)(py)(IMes)(PPh3)]BF4, and [Ir(H)2(NCMe)(py)2(PPh3)]BF4. Studies are also described that employ the deuterium-labeled substrates CD3CN and C5D5N, and the labeled ligands P(C6D5)3 and IMes-d22, to demonstrate that dramatically improved levels of HP can be achieved as a consequence of reducing proton dilution and hence polarization wastage. By a combination of these studies with experiments in which the magnetic field experienced by the sample at the point of polarization transfer is varied, confirmation of the resonance assignments is achieved. Furthermore, when [Ir(H)2(pyridine-h5)(pyridine-d5)(IMes)(PPh3)]BF4 is examined, its hydride ligand signals are shown to become visible through para-hydrogen-induced polarization rather than SABRE.