Ryan Thomas Elliott

Damping of inter-area oscillations using energy storage

Low frequency inter-area oscillations have been identified as a significant problem in utility systems due to the potential for system damage and the resulting restrictions on power transmission over select lines. Previous research has identified real power injection by energy storage based damping control nodes as a promising approach to mitigate inter-area oscillations. In this paper, a candidate energy storage system based on UltraCapacitor technology is evaluated for damping control applications in the Western Electric Coordinating Council (WECC), and an analytical method for ensuring proper stability margins is also presented for inclusion in a future supervisory control algorithm. Dynamic simulations of the WECC were performed to validate the expected system performance. Finally, the Nyquist stability criteria was employed to derive safe operating regions in the gain, time delay space for a simple two-area system to provide guaranteed margins of stability.

Generic solar photovoltaic system dynamic simulation model specification

This document is intended to serve as a specification for generic solar photovoltaic (PV) system positive-sequence dynamic models to be implemented by software developers and approved by the WECC MVWG for use in bulk system dynamic simulations in accordance with NERC MOD standards. Two specific dynamic models are included in the scope of this document. The first, a Central Station PV System model, is intended to capture the most important dynamic characteristics of large scale (> 10 MW) PV systems with a central Point of Interconnection (POI) at the transmission level. The second, a Distributed PV System model, is intended to represent an aggregation of smaller, distribution-connected systems that comprise a portion of a composite load that might be modeled at a transmission load bus.

Wind generation controls for damping of inter-area oscillations

Inter-area oscillations are one of the factors that limit transmission capacity in large interconnected systems. In this paper we investigate the effects of increasing wind generation on inter-area modes and propose the use of additional control schemes for wind plants for mitigation of inter-area oscillations. Control schemes include droop control and inertial emulation, which are originally aimed at improving transient stability. The sensitivities of inter-area modes to droop control and inertial emulation gains are identified. Implementation of suggested controls schemes via collocated energy storage devices is also explored.

Small signal stability of the western North American power grid with high penetrations of renewable generation

The goal of this effort was to assess the effect of high penetration solar deployment on the small signal stability of the western North American power system (wNAPS). Small signal stability is concerned with the system response to small disturbances, where the system is operating in a linear region. The study area consisted of the region governed by the Western Electricity Coordinating Council (WECC). General Electrics Positive Sequence Load Flow software (PSLF®) was employed to simulate the power system. A resistive brake insertion was employed to stimulate the system. The data was then analyzed in MATLAB1® using subspace methods (Eigensystem Realization Algorithm). Two different WECC base cases were analyzed: 2022 light spring and 2016 heavy summer. Each base case was also modified to increase the percentage of wind and solar. In order to keep power flows the same, the modified cases replaced conventional generation with renewable generation. The replacements were performed on a regional basis so that solar and wind were placed in suitable locations. The main finding was that increased renewable penetration increases the frequency of inter-area modes, with minimal impact on damping. The slight increase in mode frequency was consistent with the loss of inertia as conventional generation is replaced with wind and solar. Then, distributed control of renewable generation was assessed as a potential mitigation, along with an analysis of the impact of communications latency on the distributed control algorithms.

Supervisory system for a wide area damping controller using PDCI modulation and real-time PMU feedback

This paper describes a control scheme to mitigate inter-area oscillations through active damping. The control system uses real-time phasor measurement unit (PMU) feedback to construct a commanded power signal to modulate the flow of real power over the Pacific DC Intertie (PDCI) located in the western North American Power System (wNAPS). A hardware prototype was constructed to implement the control scheme. To ensure safe and reliable performance, the project integrates a supervisory system to ensure the controller is operating as expected at all times. A suite of supervisory functions are implemented across three hardware platforms. If any controller mal-function is detected, the supervisory system promptly disables the controller through a bumpless transfer method. This paper presents a detailed description of the control scheme, simulation results, the bumpless transfer method, and a redundancy and diversity method in the selection of PMU signals for feedback. This paper also describes in detail the supervisory system implemented to ensure safe and reliable damping performance of the real-time wide area damping controller.

New Wholesale Power Market Design Using Linked Forward Markets

This report proposes a reformulation of U.S. ISO/RTO-managed wholesale electric power mar- kets for improved reliability and e ciency of system operations. Current markets do not specify or compensate primary frequency response. They also unnecessarily limit the participation of new technologies in reserve markets and o er insu cient economic inducements for new capacity invest- ment. In the proposed market reformulation, energy products are represented as physically-covered rm contracts and reserve products as physically-covered call option contracts. Trading of these products is supported by a backbone of linked ISO/RTO-managed forward markets with planning horizons ranging from multiple years to minutes ahead. A principal advantage of this reformulation is that reserve needs can be speci ed in detail, and resources can o er the services for which they are best suited, without being forced to conform to rigid reserve product de nitions. This should improve the business case for electric energy storage and other emerging technologies to provide reserve. In addition, the facilitation of price discovery should help to ensure e cient energy/reserve procurement and adequate levels of new capacity investment.

Optimal locations for energy storage damping systems in the Western North American interconnect

Electromechanical oscillations often limit transmission capacity in the western North American Power System (termed the wNAPS). Recent research and development has focused on employing large-scale damping controls via wide-area feedback. Such an approach is made possible by the recent installation of a wide-area real-time measurement system based upon Phasor Measurement Unit (PMU) technology. One potential large-scale damping approach is based on energy storage devices. Such an approach has considerable promise for damping oscillations. This paper considers the placement of such devices within the wNAPS system. We explore combining energy storage devices with HVDC modulation of the Pacific DC Intertie (PDCI). We include eigenanalysis of a reduced-order wNAPS system, detailed analysis of a basic two-area dynamic system, and full-order transient simulations. We conclude that the optimal energy storage location is in the area with the lower inertia.

Open-loop testing results for the pacific DC intertie wide area damping controller

This paper describes the initial open-loop operation of a prototype control system aimed at mitigating inter-area oscillations through active DC power modulation. The control system uses real-time synchrophasor feedback to construct a commanded power signal added to the scheduled power on the Pacific DC Intertie (PDCI) within the western North American power system (wNAPS). The control strategy is based upon nearly a decade of simulation, linear analysis, and actual system tests. The control system must add damping to all modes which are controllable and “do no harm” to the AC grid. Tests were conducted in which the damping controller injected live probing signals into the PDCI controls to change the power flow on the PDCI by up to ±125 MW. While the probing tests are taking place, the damping controller recorded what it would have done if it were providing active damping. The tests demonstrate that the dynamic response of the DC system is highly desirable with a response time of 11 ms which is well within the desired range. The tests also verify that the overall transfer functions are consistent with past studies and tests. Finally, the tests show that the prototype controller behaves as expected and will improve damping in closed-loop operation.

Dynamic Simulation over Long Time Periods with 100% Solar Generation.

This project aimed to identify the path forward for dynamic simulation tools to accommodate these needs by characterizing the properties of power systems (with high PV penetration), analyzing how these properties affect dynamic simulation software, and offering solutions for potential problems.