Ryotaro Matsuda

Highly controlled acetylene accommodation in a metal-organic microporous material.

Metal–organic microporous materials (MOMs) have attracted wide scientific attention owing to their unusual structure and properties, as well as commercial interest due to their potential applications in storage, separation and heterogeneous catalysis. One of the advantages of MOMs compared to other microporous materials, such as activated carbons, is their ability to exhibit a variety of pore surface properties such as hydrophilicity and chirality, as a result of the controlled incorporation of organic functional groups into the pore walls. This capability means that the pore surfaces of MOMs could be designed to adsorb specific molecules; but few design strategies for the adsorption of small molecules have been established so far. Here we report high levels of selective sorption of acetylene molecules as compared to a very similar molecule, carbon dioxide, onto the functionalized surface of a MOM. The acetylene molecules are held at a periodic distance from one another by hydrogen bonding between two non-coordinated oxygen atoms in the nanoscale pore wall of the MOM and the two hydrogen atoms of the acetylene molecule. This permits the stable storage of acetylene at a density 200 times the safe compression limit of free acetylene at room temperature.

Gas detection by structural variations of fluorescent guest molecules in a flexible porous coordination polymer

The development of a new methodology for visualizing and detecting gases is imperative for various applications. Here, we report a novel strategy in which gas molecules are detected by signals from a reporter guest that can read out a host structural transformation. A composite between a flexible porous coordination polymer and fluorescent reporter distyrylbenzene (DSB) selectively adsorbed CO₂ over other atmospheric gases. This adsorption induced a host transformation, which was accompanied by conformational variations of the included DSB. This read-out process resulted in a critical change in DSB fluorescence at a specific threshold pressure. The composite shows different fluorescence responses to CO₂ and acetylene, compounds that have similar physicochemical properties. Our system showed, for the first time, that fluorescent molecules can detect gases without any chemical interaction or energy transfer. The host-guest coupled transformations play a pivotal role in converting the gas adsorption events into detectable output signals.

A Pillared-Layer Coordination Polymer with a Rotatable Pillar Acting as a Molecular Gate for Guest Molecules

The design of pore properties utilizing flexible motifs and functional groups is of importance to obtain porous coordination polymers with desirable functions. We have prepared a 3D pillared-layer coordination polymer, {[Cd(2)(pzdc)(2)L(H(2)O)(2)].5(H(2)O).(CH(3)CH(2)OH)}(n) (1, H(2)pzdc = 2,3-pyrazinedicarboxylic acid; L = 2,5-bis(2-hydroxyethoxy)-1,4-bis(4-pyridyl)benzene) showing (i) a rotatable pillar bearing ethylene glycol side chains acting as a molecular gate with locking/unlocking interactions triggered by guest inclusion between the side chains, (ii) framework flexibility with slippage of the layers, and (iii) coordinatively unsaturated metal centers as guest accessible sites through the removal of the water coligands. The framework clearly shows reversible single-crystal-to-single-crystal transformations in response to the removal and rebinding of guest molecules, the observation of these processes has provided fundamental clues to the understanding of the sorption profiles. The X-ray structures indicate that the 3D host framework is retained during the transformations, involving mainly rotation of the pillars and slippage of the layers. The structure of dried form 2, [Cd(2)(pzdc)(2)L](n), has no void volume and no water coligands. Interestingly, the adsorption isotherm of water for 2 at 298 K exhibits three distinct steps coinciding with the framework functions. Compound 2 favors the uptake of CO(2) (195 K) over N(2) (77 K) and O(2) (77 K). Above all, we report on a molecular gate with a rotational module exhibiting a locking/unlocking system which accounts for gate-opening type sorption profiles.

Selective sorption of oxygen and nitric oxide by an electron-donating flexible porous coordination polymer

Porous coordination polymers are materials formed from metal ions that are bridged together by organic linkers and that can combine two seemingly contradictory properties—crystallinity and flexibility. Porous coordination polymers can therefore create highly regular yet dynamic nanoporous domains that are particularly promising for sorption applications. Here, we describe the effective selective sorption of dioxygen and nitric oxide by a structurally and electronically dynamic porous coordination polymer built from zinc centres and tetracyanoquinodimethane (TCNQ) as a linker. In contrast to a variety of other gas molecules (C2H2, Ar, CO2, N2 and CO), O2 and NO are accommodated in its pores. This unprecedented preference arises from the concerted effect of the charge-transfer interaction between TCNQ and these guests, and the switchable gate opening and closing of the pores of the framework. This system provides further insight into the efficient recognition of small gas molecules. Porous coordination polymers can form materials that are both crystalline and flexible, creating regular yet dynamic channels that are promising for guest sorption. Guest selectivity is difficult to achieve, however, and typically relies on size- or shape-recognition. A framework has now been assembled that combines charge-transfer interactions and structural flexibility to only accommodate O2 and NO.

Self-Accelerating CO Sorption in a Soft Nanoporous Crystal

Soft, Selective CO Sorption Many industrial processes produce CO, which could be used as a chemical feedstock, but separation of CO from other gases, especially N2, is too difficult to be economically viable. Sato et al. (p. 167, published online 12 December 2013) now report that a porous coordination polymer containing Cu2+ ions can selectivity bind CO through serial structural changes reminiscent of allosteric effects in proteins. The separation of CO-N2 mixtures can be achieved with a low input energy for CO desorption. A soft nanoporous crystalline solid exhibits self-accelerating, selective carbon monoxide adsorption. Carbon monoxide (CO) produced in many large-scale industrial oxidation processes is difficult to separate from nitrogen (N2), and afterward, CO is further oxidized to carbon dioxide. Here, we report a soft nanoporous crystalline material that selectively adsorbs CO with adaptable pores, and we present crystallographic evidence that CO molecules can coordinate with copper(II) ions. The unprecedented high selectivity was achieved by the synergetic effect of the local interaction between CO and accessible metal sites and a global transformation of the framework. This transformable crystalline material realized the separation of CO from mixtures with N2, a gas that is the most competitive to CO. The dynamic and efficient molecular trapping and releasing system is reminiscent of sophisticated biological systems such as heme proteins.

Nanochannels of Two Distinct Cross-Sections in a Porous Al-Based Coordination Polymer

A new aluminum naphthalenedicarboxylate Al(OH)(1,4-NDC) x 2 H2O compound has been synthesized. The crystal structure exhibits a three-dimensional framework composed of infinite chains of corner-sharing octahedral Al(OH)2O4 with 1,4-naphthanedicarboxylate ligands forming two types of channels with squared-shape cross-section. The large channels present a cross-section of 7.7 x 7.7 A(2), while the small channels are about 3.0 x 3.0 A(2). When water molecules are removed, no structural transformation occurs, generating a robust structure with permanent porosity and remarkable thermal stability. 2D (1)H-(13)C heteronuclear correlation NMR measurements, together with the application of Lee-Goldburg homonuclear decoupling, were applied, for the first time, to porous coordination polymers revealing the spatial relationships between the (1)H and (13)C spin-active nuclei of the framework. To demonstrate the open pore structure and the easy accessibility of the nanochannels to the gas phase, highly sensitive hyperpolarized (HP) xenon NMR, under extreme xenon dilution, has been applied. Xenon can diffuse selectively into the large nanochannels, while the small ones show no substantial uptake of xenon due to severe restrictions along the channels that prevent the diffusion. Two-dimensional exchange experiments showed the exchange time to be as short as 15 ms. Through variable-temperature HP (129)Xe NMR experiments we were able to achieve an unprecedented description of the large nanochannel space and surface, a physisorption energy of 10 kJ mol(-1), and the chemical shift value of xenon probing the internal surfaces. The large pore channels are straight, parallel, and independent, allowing one-dimensional anisotropic diffusion of gases and vapors. Their walls are composed of the naphthalene moieties that create an unique environment for selective sorption. These results prompted us to measure the storage capacity toward methanol, acetone, benzene, and carbon dioxide. The selective adsorption of methanol and acetone vs that of water, together with the permanent porosity and high thermal stability, makes this compound a suitable matrix for separation and purification.

Guest-to-Host Transmission of Structural Changes for Stimuli-Responsive Adsorption Property

We show that structural changes of a guest molecule can trigger structural transformations of a crystalline host framework. Azobenzene was introduced into a flexible porous coordination polymer (PCP), and cis/trans isomerizations of the guest azobenzene by light or heat successfully induced structural transformations of the host PCP in a reversible fashion. This guest-to-host structural transmission resulted in drastic changes in the gas adsorption property of the host-guest composite, displaying a new strategy for creating stimuli-responsive porous materials.

Exceptional Thermal Stability in a Supramolecular Organic Framework: Porosity and Gas Storage

Reaction of β-amino-β-(pyrid-4-yl)acrylonitrile with the aromatic dicarboxaldehydes 9,10-bis(4-formylphenyl)anthracene and terephthalaldehyde affords the dihydropyridyl products 9,10-bis(4-((3,5-dicyano-2,6-dipyridyl)dihydropyridyl)phenyl)anthracene (L(1)) and 1,4-bis(4-(3,5-dicyano-2,6-dipyridyl)dihydropyridyl)benzene (L(2)), respectively. In the solid state [L(1)]·2.5DMF·3MeOH (SOF-1) crystallizes in the monoclinic space group P2(1)/c and forms a 3D stable supramolecular organic framework via strong N-H···N(py) hydrogen bonds and π-π interactions. The material incorporates pyridyl-decorated channels and shows permanent porosity in the solid state. The pore volumes of the desolvated framework SOF-1a calculated from the N(2) isotherm at 125 K and the CO(2) isotherm at 195 K are 0.227 and 0.244 cm(3) g(-1), respectively. The N(2) absorption capacity of SOF-1a at 77 K is very low, with an uptake of 0.63 mmol g(-1) at 1 bar, although saturation N(2) adsorption at 125 K is 6.55 mmol g(-1) (or 143 cm(3) g(-1)). At ambient temperature, SOF-1a shows significant CO(2) adsorption with approximately 3 mol of CO(2) absorbed per mole of host at 16 bar and 298 K, corresponding to 69 cm(3) g(-1) at STP. SOF-1a also adsorbs significant amounts of C(2)H(2), with an uptake of 124 cm(3) (STP) g(-1) (5.52 mmol g(-1)) at 1 bar at 195 K. Methane uptake at 195 K and 1 bar is 69 cm(3) (STP) g(-1). Overall, gas adsorption measurements on desolvated framework SOF-1a reveal not only high capacity uptakes for C(2)H(2) and CO(2), compared to other crystalline molecular organic solids, but also an adsorption selectivity in the order C(2)H(2) > CO(2) > CH(4) > N(2). Overall, C(2)H(2)(270 K)/CH(4)(273 K) selectivity is 33.7 based on Henrys Law constant, while the C(2)H(2)(270 K)/CO(2)(273 K) ratio of uptake at 1 bar is 2.05. The less bulky analogue L(2) crystallizes in the triclinic space group P1 as two different solvates [L(2)]·2DMF·5C(6)H(6) (S2A) and [L(2)]·2DMF·4MeOH (S2B) as pale yellow tablets and blocks, respectively. Each L(2) molecule in S2A participates in two N-H···O hydrogen bonds between dihydropyridyl rings and solvent DMF molecules. Packing of these layers generates 1D nanochannels along the crystallographic a and b axes which host DMF and benzene molecules. In S2B, each L(2) ligand participates in hydrogen bonding via an N-H···O interaction between the N-H of the dihydropyridyl ring and the O of a MeOH and also via an N···H-O interaction between the N center of a pyridine ring and the H-O of a second MeOH molecule. The presence of the L(2)-HOMe hydrogen bonds prevents ligand-ligand hydrogen bonding. As a result, S2B crystallizes as one-dimensional chains rather than as an extended 3D network. Thermal removal of solvents from S2A results in conversion to denser phase S2C which shows no effective permanent porosity.

Cellulose Hydrolysis by a New Porous Coordination Polymer Decorated with Sulfonic Acid Functional Groups

Biofuels have attracted attention in this decade as an alternative energy resource to limited fossil fuels. The world production of bioethanol considerably increased from 17 billion liters in 2000 to more than 46 billion liters in 2007. [ 1 ] Most bioethanol is currently produced from food crops, such as corn and sugarcane, as biomass resources because the food crops derive water-soluble starch that can be easily converted to bioethanol by yeast bacteria or acid catalysts. However, this ethanol production process consumes huge amounts of food crops and competes with the supply of food. To overcome this problem, starch-derived ethanol is anticipated to be replaced by cellulose-derived ethanol because the cellulose can be conveniently obtained from wooden or grain plant fi bers that do not compete with the food supply. Recently, several solvent media and catalysts for the hydrolysis of cellulose have been investigated, including supercritical water, ionic liquids, mesoporous carbon functionalized with ruthenium metal or SO 3 H groups, and sulfonated ion exchange resins. [ 2–9 ] Nevertheless, further development of more effective and “green” materials for hydrolysis of cellulose is required. Porous coordination polymers (PCPs) or metal-organic frameworks (MOFs), composed of metal ions and various organic ligands, have been extensively studied as a new class of porous solids. One of the advantages of PCPs is their highly designable framework, which provides a large variety of pore surfaces and pore structures. [ 10–16 ] Here we show the synthesis of a new PCP (compound 1 ) that has the sulfonic acid groups as a very strong acid on its pore surface and demonstrate its catalytic performance for cellulose hydrolysis. It is essential to decorate the pore surface with a Brønsted acid for the fabrication of a solid acid catalyst. Whereas many

Heterogeneously Hybridized Porous Coordination Polymer Crystals: Fabrication of Heterometallic Core–Shell Single Crystals with an In-Plane Rotational Epitaxial Relationship†

MOF on MOF: Core-shell porous coordination polymer (PCP) crystals are fabricated at the single-crystal level by epitaxial growth in solution. Synchrotron X-ray diffraction measurements unveiled the structural relationship between the shell crystal and the core crystal, where in-plane rotational epitaxial growth compensates the difference in lattice constant.