S.D. Kulkarni

Tailoring magnetic and dielectric properties of rubber ferrite composites containing mixed ferrites

Rubber ferrite composites containing various mixed ferrites were prepared for different compositions and various loadings. The magnetic and dielectric properties of the fillers as well as the ferrite filled matrixes were evaluated separately. The results are correlated. Simple equations are proposed to predetermine the magnetic and dielectric properties. The validity of these equations is verified and they are found to be in good agreement. These equations are useful in tailoring the magnetic and dielectric properties of these composites with predetermined properties.

Magnetic and processability studies on rubber ferrite composites based on natural rubber and mixed ferrite

Polycrystalline single phasic mixed ferrites belonging to the series Ni1−xZnxFe2O4 for various values of x have been prepared by conventional ceramic techniques. Pre-characterized nickel zinc ferrites were then incorporated into a natural rubber matrix according to a specific recipe for various loadings. The processability and cure parameters were then determined. The magnetic properties of the ceramic filler as well as the ferrite loaded rubber ferrite composites (RFC) were evaluated and compared. A general equation for predicting the magnetic properties was also formulated. The validity of these equations were then checked and correlated with the experimental data. The coercivity of the RFCs almost resemble that of the ceramic component in the RFC. Percolation threshold is not reached for a maximum loading of 120 phr (parts per hundred rubber by weight) of the filler. These studies indicate that flexible magnets can be made with appropriate magnetic properties namely saturation magnetisation (Ms) and magnetic field strength (Hc) by a judicious choice of x and a corresponding loading. These studies also suggest that there is no possible interaction between the filler and the matrix at least at the macroscopic level. The formulated equation will aid in synthesizing RFCs with predetermined magnetic properties.

Processability, hardness, and magnetic properties of rubber ferrite composites containing manganese zinc ferrites

Abstract Rubber ferrite composites have the unique advantage of mouldability, which is not easily obtainable using ceramic magnetic materials. The incorporation of mixed ferrites in appropriate weight ratios into the rubber matrix not only modifies the dielectric properties of the composite but also imparts magnetic properties to it. Mixed ferrites belonging to the series of Mn(1 -x)Znx Fe2 O4 have been synthesised with different values of x in steps of 0·2, using conventional ceramic processing techniques. Rubber ferrite composites were prepared by the incorporation of these pre-characterised polycrystalline Mn(1 -x)ZnxFe2 O4 ceramics into a natural rubber matrix at different loadings according to a specific recipe. The processability of these elastomers was determined by investigating their cure characteristics. The magnetic properties of the ceramic fillers as well as of the rubber ferrite composites were evaluated and the results were correlated. Studies of the magnetic properties of these rubber ferrite composites indicate that the magnetisation increases with loading of the filler without changing the coercive field. The hardness of these composites shows a steady increase with the loading of the magnetic fillers. The evaluation of hardness and magnetic characteristics indicates that composites with optimum magnetisation and almost minimum stiffness can be achieved with a maximum loading of 120 phr of the filler at x=0 4. From the data on the magnetisation of the composites, a simple relationship connecting the magnetisation of the rubber ferrite composite and the filler was formulated. This can be used to synthesise rubber ferrite composites with predetermined magnetic properties.

Preparation, and Structural and Magnetic Properties of Ca Substituted Magnesium Ferrite with Composition MgCaxFe2−xO4 ( = 0.00, 0.01, 0.03, 0.05, 0.07)

Calcium substituted magnesium ferrite with composition MgCaxFe2−xO4 (where = 0.00, 0.01, 0.03, 0.05, 0.07) was prepared by ceramic technique. These compositions were then subjected to detailed study for structural and magnetic properties. X-ray diffraction studies reveal the formation of single phase cubic spinel. The values of lattice constant increase with the increase in calcium concentration from = 0.00 to = 0.03 and then decrease. Scanning electron microscopic (SEM) technique was used to study the morphology of the grown materials. The grain size was calculated using average intercept line method. The elemental composition of pure and calcium substituted magnesium ferrite was obtained from energy dispersive X-ray analysis (EDAX) spectrum. The hysteresis loop confirms the magnetic behaviour of the prepared composition, which is then discussed on the basis of cation distribution. The parameters such as saturation magnetization, coericivity, and retentivity are calculated. The Curie temperature was found to decrease with increasing calcium content.

Effect of thermal annealing on Fe40Ni38B18Mo4 thin films: modified Herzer model for magnetic evolution

Magnetic properties of nano-crystalline soft magnetic alloys have usually been correlated to structural evolution with heat treatment. However, literature reports pertaining to the study of nano-crystalline thin films are less abundant. Thin films of Fe40Ni38B18Mo4 were deposited on glass substrates under a high vacuum of ≈ 10−6 Torr by employing resistive heating. They were annealed at various temperatures ranging from 373 to 773 K based on differential scanning calorimetric studies carried out on the ribbons. The magnetic characteristics were investigated using vibrating sample magnetometry. Morphological characterizations were carried out using atomic force microscopy (AFM), and magnetic force microscopy (MFM) imaging is used to study the domain characteristics. The variation of magnetic properties with thermal annealing is also investigated. From AFM and MFM images it can be inferred that the crystallization temperature of the as-prepared films are lower than their bulk counterparts. Also there is a progressive evolution of coercivity up to 573 K, which is an indication of the lowering of nano-crystallization temperature in thin films. The variation of coercivity with the structural evolution of the thin films with annealing is discussed and a plausible explanation is provided using the modified random anisotropy model.